Publication Records

MAJERNÍK, Ján, Štefan GAŠPÁR, Martin PODAŘIL and Jan KOLÍNSKY. Evaluation of High Pressure Die Casting Mold Temperature Relations Depending on the Location of the Tempering Channels. Archives of Foundry Engineering. WARSZAWA 00-901, POLAND: POLSKA AKAD NAUK, POLISH ACAD SCIENCESPL DEFILAD 1, WARSZAWA 00-901, POLAND, 2024, Vol. 24, No. 1, p. 115-120. ISSN 1897-3310.

MAJERNÍK, Ján, Jiří ŠÁL, Martin PODAŘIL, Michaela MAJERNÍKOVÁ and Jozef DOBRANSKY. THE EFFECT OF THE RE-GRANULATE ADDITION ON THE TENSILE STRENGTH MODIFICATION OF THE SAMPLES TAKEN FROM THE INJECTION VOLUME. MM Science Journal. MM Science Journal, 2024, Neuveden, Neuveden, p. 7359-7363. ISSN 1803-1269.

MAJERNÍK, Ján and Martin PODAŘIL. The Piston Velocity Impact on the Filling Chamber Wave Formation of High Pressure Die Casting Machine in 1st Phase of Casting Cycle. International journal of advanced manufacturing technology. London: Springer, 2023, vol. 23, No 4, p. 495-503. ISSN 0268-3768.

PODAŘIL, Martin, Ján MAJERNÍK, Rudolf KAMPF, Ladislav SOCHA, Karel GRYC, Tomáš PRÁŠIL and Martin GRÁF. Aluminum Melt Degassing Process Evaluation Depending on the Design and the Degree of the FDU Unit Graphite Rotor Wear. Materials. Switzerland: MDPI, 2022, Volume 15, Issue 14, p. nestránkováno, 15 pp. ISSN 1996-1944.

GAŠPÁR, Gašpár, Ján MAJERNÍK, Mirosław TUPAJ and Martin PODAŘIL. COMPARISON OF POROSITY OF CASTS PRODUCED BY HPDC AND VPDC TECHNOLOGIES. MM SCIENCE JOURNAL. Prague: MM Science, PRIPOCNI 1519-10A, PRAGUE 10 10100, CZECH REPUBLIC, 2022, 2022/2022, neuvedeno, p. 5566-5570. ISSN 1803-1269.

GAŠPÁR, Štefan, Ján MAJERNÍK, Andrzej TRYTEK, Martin PODAŘIL and Zuzana BEŇOVÁ. The Effect of the Return Material Implementation into the Production of Silumin Casts on Technological and Economic Indicators of Production Process 1. Archives of Foundry Engineering. WARSZAWA, Poland: Polska Akademia Nauk, 2022, vol. 22, No 1, p. 69-76. ISSN 1897-3310.

GAŠPÁR, Štefan, Ján MAJERNÍK and Jan KOLÍNSKÝ. Analysis of causes of porosity change of castings under the influence of variable biscuit height in the filling chamber. Materials. BASEL, SWITZERLAND: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2021, vol. 14, No 22, p. nestránkováno, 12 pp. ISSN 1996-1944.

MAJERNÍK, Ján, Štefan GAŠPÁR, Ján PAŠKO and Tomáš CORANIČ. DESIGN OF CASTING AND GATING SYSTEMS – PRIMARY PREDICTION OF QUALITY OF DIE CASTING COMPONENTS. First. Lüdenscheid - Germany: RAM-Verlag, 2021, 108 pp. ISBN 978-3-96595-014-6.

GASPAR, Stefan, Tomas CORANIC, Ján MAJERNÍK, Jozef HUSAR, Lucia KNAPCIKOVA, Dominik GOJDAN and Jan PASKO. Influence of Gating System Parameters of Die-Cast Molds on Properties of Al-Si Castings. Materials. SWITZERLAND: MDPI AG, 2021, vol. 14, No 13, p. nestránkováno, 19 pp. ISSN 1996-1944.

MAJERNÍK, Ján, Martin PODAŘIL and Dominik GOJDAN. Influence of overflow connecting channel cross-section design on selected parameters of high pressure die casting. Archives of Foundry Engineering. Polsko: Polska Akademia Nauk, 2021, vol. 21, No 2, p. 75-80. ISSN 1897-3310.

GAŠPÁR, Štefan, Ján MAJERNÍK, Tomáš CORANIČ and Ján PAŠKO. Influence of runner cross-section on air entrapment in pressure die casts volume. MM Science Journal. Praha: MM publishing Ltd., 2021, Neuveden, JUN 2021, p. 4491-4495. ISSN 1803-1269.

MAJERNÍK, Ján and Jan KOLÍNSKÝ. Research and Evaluation of the Influence of the Construction of the Gate and the Influence of the Piston Velocity on the Distribution of Gases into the Volume of the Casting. MATERIALS. BASEL, SWITZERLAND: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2021, vol. 14, No 9, p. 1-16. ISSN 1996-1944.

MAJERNÍK, Ján, Gašpár ŠTEFAN, Martin PODAŘIL and Coranič TOMÁŠ. EVALUATION OF THERMAL CONDITIONS AT CAST-DIECASTING MOLD INTERFACE. MM SCIENCE JOURNAL. PRIPOCNI 1519-10A, PRAGUE 10, 10100, CZE: MM SCIENCE, 2020, vol. 2020, November 2020, p. 4112-4118. ISSN 1803-1269.

MAJERNÍK, Ján, Štefan GAŠPÁR, Ján KMEC, Monika KARKOVÁ and Jozef MAŠČENÍK. Possibility of Utilization of Gate Geometry to Modify the Mechanical and Structural Properties of Castings on the Al-Si Basis. Materials. BASEL: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2020, vol. 13, No 16, p. nestránkováno, 2 pp. ISSN 1996-1944. Available from: https://dx.doi.org/10.3390/MA13163539.

M., Tupaj, Trytek A., Łysiak K., Zbyrad-Kołodziej W., Łaczek A. and Ján MAJERNÍK. The use of concentrated heat stream to repair AlZn10Si8Mg alloy castings. Manufacturing Technology. Usti nad Labem: J. E. Purkyne University in Usti nad Labem, 2020, Volume 20, No 3, p. 401-408. ISSN 1213-2489. Available from: https://dx.doi.org/10.21062/mft.2020.027.

MAJERNÍK, Ján and Štefan GAŠPÁR. Analysis of Interaction between Position of Gate and Selected Properties of Low-Weight Casts on the Silumin Basis. Archives of Foundry Engineering. Warszawa: POLSKA AKAD NAUK, POLISH ACAD SCIENCES, PL DEFILAD 1, 2019, vol. 19, No 3, p. 106-110. ISSN 1897-3310. Available from: https://dx.doi.org/10.24425/afe.2019.129619.

MAJERNÍK, Ján and Martin PODAŘIL. Evaluation of the Temperature Distribution of a Die Casting Mold of X38CrMoV5_1 Steel. Archives of Foundry Engineering. Warszawa: POLSKA AKAD NAUK, POLISH ACAD SCIENCES, PL DEFILAD 1, 2019, vol. 19, No 2, p. 107-112. ISSN 1897-3310. Available from: https://dx.doi.org/10.24425/afe.2019.127125.

MAJERNÍK, Ján, Martin PODAŘIL, Ladislav SOCHA and Karel GRYC. Implementation Aspects of the Remelting Material in the Production of High Pressure Die Casts on the Aluminum Based Alloys. Online. In neuvedeno. METAL 2019 - 28th International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER Ltd., 2019, p. 1652 - 1657. ISBN 978-80-87294-92-5.

MAJERNÍK, Ján and Martin PODAŘIL. Influence of runner geometry on the gas entrapment in volume of pressure die cast. Archives of Foundry Engineering. Warszawa: Polish Academy of Sciences, 2019, vol. 19, No 3, p. 33-38. ISSN 1897-3310. Available from: https://dx.doi.org/10.24425/afe.2019.129626.

MAJERNÍK, Ján, Štefan GAŠPÁR, Martin PODAŘIL and Jan KOLÍNSKÝ. Optimization of the Runner Numerical Design Dimensions using the Simulation Program. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2019, vol. 19, No 2, p. 273 - 279. ISSN 1213-2489.

MAJERNÍK, Ján. PROBLEMATIKA NÁVRHU VTOKOVÝCH SOUSTAV PERMANENTNÍCH FOREM PRO LITÍ KOVŮ POD TLAKEM (The issue of the gating system design for permanent dies). 1st ed. Stalowa Wola, Poľsko: Wydawnictwo Sztafeta Sp. z o.o., 2019, 94 pp. ISBN 978-83-63767-63-1.

MAJERNÍK, Ján, Štefan GAŠPÁR, Ján PAŠKO, Jozef HUSÁR, Andrzej TRYTEK and Miroslaw TUPAJ. TECHNOLOGIE A TECHNIKA LITÍ KOVŮ POD TLAKEM (PRESSURE METHODS AND METAL FORMING OF METALS). 1st ed. Brno: Tribun EU s.r.o., 2019, 170 pp. Vysokoškolská učebnice. ISBN 978-80-263-1553-7.

PODAŘIL, Martin, Ján MAJERNÍK and Jiří ŠÁL. The Influence of Anisothermal Hardening on the Low Carbon Steel Properties. MM Science Journal. Praha: MM publishing Ltd., 2019, vol. 2019, December, p. 3468-3473. ISSN 1803-1269. Available from: https://dx.doi.org/10.17973/MMSJ.2019_12_2019021.

MAJERNÍK, Ján, Štefan GAŠPÁR, Martin PODAŘIL and Jan KOLÍNSKÝ. The influence of the Gate Geometry on Selected Process Parameters in the High Pressure Die Casting Technology. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2019, vol. 19, No 1, p. 101-106. ISSN 1213-2489.

PUZYR, Ruslan, Tetiana HEIKOVÁ, Ján MAJERNÍK, Monika KARKOVÁ and Ján KMEC. Experimental Study of the Process of Radial Rotation Profiling of Wheel Rims Resulting in Formation and Technological Flattening of the Corrugations. MANUFACTURING TECHNOLOGY. Ústí nad Labem: Univerzita JE Purkyně v Ústí nad Labem, 2018, vol. 18, No 1, p. 106-111. ISSN 1213-2489.

MAJERNÍK, Ján, Štefan GAŠPÁR, Karel GRYC and Ladislav SOCHA. Changes in Eutectic Silumin Structure Depending on Gate Geometry and Its Effect on Me-chanical Properties of Casting. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2018, vol. 18, No 3, p. 439-443. ISSN 1213-2489.

PODAŘIL, Martin and Ján MAJERNÍK. Influence of material change of a single-stage front gearbox drive shaft on selected strength analysis parameters. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2018, vol. 6, No 18, p. 1001-1006. ISSN 1213-2489.

KMEC, Ján, Monika KARKOVÁ and Ján MAJERNÍK. PLANNING MANUFACTURING PROCESSES OF SURFACE FORMING WITHIN INDUSTRY 4.0. MM Science Journal. Praha: MM Science Journal, 2018, neuveden, No 12, p. 2680-2685. ISSN 1803-1269.

VOCHOZKA, Marek, Vojtěch STEHEL, Anna MAROUŠKOVÁ, Ján MAJERNÍK, Monika KARKOVÁ, Ladislav KOLÁŘ and Jaroslav ŽÁK. Alternatives for the use of solid pyrolysis byproducts for electricity generation. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. USA: Taylor & Francis Group, LLC, 2017, vol. 39, No 17, p. 1875-1878. ISSN 1556-7230.

GASPAR, Stefan, Jan PASKO and Ján MAJERNÍK. Analysis of Change of Cast Macrostructure under Influence of Structural Adjustments of Ingate and its Impact upon Mechanical Properties. TEM Journal. Serbia: UIKTEN - Association for Information Communication Technology Education and Science., 2017, vol. 6, No 2, p. 358-362. ISSN 2217-8309. Available from: https://dx.doi.org/10.18421/TEM62-22.

MAJERNÍK, Ján, Ján KMEC, Miroslav GOMBÁR and Michal HALAPPI. Analysis of influence dimensions of the gate on the homogeneity of the low weight castings made of silumin. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2017, vol. 17, No 4, p. 499-502. ISSN 1213-2489.

KARKOVÁ, Monika, Ján MAJERNÍK and Ján KMEC. ANALYSIS OF INFLUENCING THE MACROSTRUCTURE AND HARDNESS OF CASTING SURFACE LAYER BY CHANGING CONDITIONS OF CRYSTALLIZATION. MM Science Journal. Praha: MM Science Journal, 2017, NEUVEDEN, No 12, p. 1910-1913. ISSN 1803-1269.

MAJERNÍK, Ján, Ján KMEC and Monika KARKOVÁ. Analysis of the Impact of the Construction of a Gate on the Macroscopic Structure of a Casting and Its Influence on the Mechanical Properties of Castings. Manufacturing Technology. Ústí nad Labem: Univerzita J. E. Purkyne, 2017, Vol. 17, No. 1, p. 62-65. ISSN 1213-2489.

MAJERNÍK, Ján, Monika KARKOVÁ and Ján KMEC. Assessment of suitability of the design of gating system with the use of simulation software. Key Engineering Materials. Switzerland: Trans Tech Publications, 2017, Neuveden, september 2017, p. 136-141. ISSN 1013-9826.

MAJERNÍK, Ján, Ján KMEC and Monika KARKOVÁ. CRITICAL RUNNER LENGTH AS A CONSTRAINING FACTOR IN GATING SYSTEM DESIGN. MM Science Journal. Praha: MM Science Journal, 2017, NEUVEDEN, No 12, p. 1929-1932. ISSN 1803-1269.

KAČALOVÁ, Mária, Ján MAJERNÍK, Miriam KUNDRATOVÁ and Tomáš CORANIČ. Dynamická analýza ozubenia (Dynamic analysis of gearing). In Ing. Jozef Husár, PhD. MANAGEMENT OF MANUFACTURING SYSTEMS 2017. 1st ed. Košice: Technická univerzita v Košiciach, 2017, p. 62-65. ISBN 978-80-553-2660-3.

KAČALOVÁ, Mária, Ján MAJERNÍK, Miriam KUNDRATOVÁ and Tomáš CORANIČ. Frekvenčná analýza vibrodiagnostického signálu prevodového mechanizmu (Frequency analysis of the vibration signal of the transmission mechanism). In Ing. Jozef Husár, PhD. MANAGEMENT OF MANUFACTURING SYSTEMS 2017. Košice: Technická univerzita v Košiciach, 2017, p. 66-72. ISBN 978-80-553-2660-3.

GAŠPÁR, Štefan, Ján PAŠKO and Ján MAJERNÍK. Influence of structure adjustnemt of gating system of casting mould upon the quality of die cast. první. Lüdenscheid, Germany: RAM - Verlag, 2017, 82 pp. 1. ISBN 978-3-942303-47-7.

MAJERNÍK, Ján, Monika KARKOVÁ and Ján KMEC. Issue of design gate dimensions and experimental assessment of the suitability of analytical design. Key Engineering Materials. Switzerland: Trans Tech Publications, 2017, Neuveden, september 2017, p. 142-148. ISSN 1013-9826.

MAJERNÍK, Ján, Štefan GAŠPÁR and Tomáš CORANIČ. Kritická dĺžka vtokového kanála ako limitujúci faktor návrhu vtokového systému (Critical length of the runner as a limiting factor design of the gating system). In Ing. Jozef Husár, PhD. MANAGEMENT OF MANUFACTURING SYSTEMS 2017. 1st ed. Košice: Technická univerzita v Košiciach, 2017, p. 93-99. ISBN 978-80-553-2660-3.

MAJERNÍK, Ján, Ján KMEC, Monika KARKOVÁ and Martin PODAŘIL. Possibilities for Change of Thermoplastic Tensile Properties Using Admixture of Recyclable Material. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2017, vol. 17, No 5, p. 778-782. ISSN 1213-2489.

SYMONOVA, Anastasiya, Enrico FILIPPI, Ján KMEC, Ján MAJERNÍK and Monika KARKOVÁ. The mechanics of machining ultrafine-grained Ti-6Al-4Mo alloy processed severe plastic deformation. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2017, vol. 17, No 4, p. 586-591. ISSN 1213-2489.

MAJERNÍK, Ján, Ján KMEC, Miroslav GOMBÁR and Martin PODAŘIL. The use of simulation programmes for the structural analysis and engineering optimization of gating system structures for use with high pressure die casting technology. Manufacturing Technology. Ústí nad Labem: Univerzita J. E. Purkyne, 2017, Vol. 17, No. 3, p. 343-347. ISSN 1213-2489.

KARKOVÁ, Monika, Ján MAJERNÍK, Ján KMEC and Kristýna PRUŠKOVÁ. Use of the water within the waterjet technology. In 17th internatonal multidisciplinary scienctific geoconference SGEM2017. 1st ed. Sofia (Bulharsko): STEF92 Technology, 2017, p. 285-292. ISBN 978-619-7408-06-5.

MAJERNÍK, Ján. VPLYV PODMIENOK KRYŠTALIZÁCIE NA MAKROŠTRUKTÚRU A POVRCHOVÚ TVRDOSŤ ODLIATKOV (Influence of crystallization conditions on macrostructure and surface hardness of castings). Mladá veda. Prešov: Vydavateľstvo UNIVERSUM, spol. s r. o., 2017, vol. 5, No 7, p. 45-52. ISSN 1339-3189.

KAČALOVÁ, Mária, Miriam KUNDRATOVÁ, Tomáš CORANIČ and Ján MAJERNÍK. Využitie CAE technológií pri pevnostnej kontrole výstupného hriadeľa kužeľového prevodu (Using CAE technology for strength control of the conical transmission output shaft). In Ing. Jozef Husár, PhD. MANAGEMENT OF MANUFACTURING SYSTEMS 2017. Košice: Technická univerzita v Košiciach, 2017, p. 73-78. ISBN 978-80-553-2660-3.

MAJERNÍK, Ján. Analýza a optimalizácia konštrukcie vybraných komponentov vtokových sústav tlakovej lejacej formy (Analysis and optimization design selected gating system components, die casting mold using simulation programs). In Jozef Husár, Michal Balog, Lucia Knapčíková. Management of manufacturing systems 2016. Bratislava: Technická univerzita v Košiciach, 2016, p. 83-88. ISBN 978-80-553-3036-5.

MAJERNÍK, Ján. Analýza ovplyvnenia makroštruktúry odliatku pomocou konštrukcie vtokového zárezu a jej vplyv na mechanické vlastnosti odliatkov (Analysis of influence by casting macrostructure inlet notch design and its influence on the mechanical properties of castings). In Jozef Husár, Michal Balog, Lucia Knapčíková. Management of manufacturing systems 2016. Bratislava: Technická univerzita v Košiciach, 2016, p. 90-95. ISBN 978-80-553-3036-5.

MAJERNÍK, Ján and Ján PAŠKO. Metodika projekcie pripojenia vtokového záveru k odliatku s valcovou plochou. Ai Magazine : automotive industry magazine. 2016, Roč. 9, č. 1, p. 67. ISSN 1337-7612.

MAJERNÍK, Ján. Ovplyvnenie prúdenia taveniny spôsobom zaformovania odliatku (Effects melt flow way mold making of die casting). Ai Magazine : automotive industry magazine. Žilina: LEADER press, s.r.o., 2016, no. 6. ISSN 1337-7612.

GAŠPÁR, Štefan, Ján PAŠKO and Ján MAJERNÍK. Specific Pressure and Mechanical Properties of the Alternator Flange from EN AC 47100 Alloy in HPDC Technology. TEM Journal. 2016, Vol. 5, č. 2, p. 160-164. ISSN 2217-8309.

MAJERNÍK, Ján and Jana GERKOVÁ. Stanovenie rázovej húževnatosti plastov pri nízkych teplotách metódou Charpy. Plastics Production. 2015, Vol. 10, No. 1, p. 74-75. ISSN 1802-1549.

MAJERNÍK, Ján. Vplyv množstva recyklátu a regranulátu Senosan na ťahové vlastnosti materiálu Starex. In Management of Manufacturing Systems 2015. TU Prešov, 2015, p. 99-102. ISBN 978-80-553-2283-4.

MAJERNÍK, Ján. Analýza vplyvu zvyšovania podielu regranulovaného materiálu Senosan na ťahové vlastnosti čistého termoplastu Starex. Plastics Production. 2014, Vol. 9, No. 2, p. 92-93. ISSN 1802-1549.

GAŠPÁR, Štefan, Ján PAŠKO and Ján MAJERNÍK. Crystallization of Aluminium Alloys. In Applied Mechanics and Materials : ICMMM 2014 : International Conference on Mechatronics, Materials and Manufacturing. 2014, p. 48-51. ISBN 978-3-03835-225-9.

MAJERNÍK, Ján, Ján PAŠKO and Štefan GAŠPÁR. Influence of the amount of recyclate and regranulate senosan on tensile properties of the material starex. In Applied Mechanics and Materials : ICMMM 2014 : International Conference on Mechatronics, Materials and Manufacturing. 2014, p. 48-51. ISBN 978-3-03835-225-9.

MAJERNÍK, Ján and Jana GERKOVÁ. Vplyv konštrukcie vtokového systému na kvalitu odliatkov. Posterus.sk. 2014, Roč. 7, č. 8, p. 1-5, 6 pp. ISSN 1338-0087.