Filter publications
-
PROCHÁZKA, Robert, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Tozan HAKAN, Cristina BORZAN, Milan KADNÁR, Zuzana PALKOVÁ, Roman GÁLIK and Karolína SLAMOVÁ. Collection of Plastic Packaging of Various Types: Sorting of Fractions of Plastic Waste Using Both Automated and Manual Modes. IEEE Access. New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2024, Neuveden, Neuveden, p. 44244-44261. ISSN 2169-3536.URL
Name in Czech: Sbírka plastových obalů různých typů: Třídění frakcí plastového odpadu automatizovaným i ručním způsobem
Name (in English): Collection of Plastic Packaging of Various Types: Sorting of Fractions of Plastic Waste Using Both Automated and Manual Modes
RIV: Article in a journal. English. United States of America.
Procházka, Robert (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: manual and automated sorting; Municipal plastic waste; operation mode economy; optical sorting equipment; processing parameters
Changed by: Barbora Kroupová, učo 25655. Changed: 22/10/2024 13:58. -
HARNIČÁROVÁ, Marta, Jan VALÍČEK and Vladimír ŠEPEĽÁK. Editorial: Recent advances in the identification of stress-strain states of materials. Frontiers in Materials. LAUSANNE , SWITZERLAND: Frontiers Media S.A, 2024, Neuveden, Neuveden, p. 1-2. ISSN 2296-8016.URL
Name in Czech: Editorial: Nejnovější pokroky v identifikaci napěťově-deformačních stavů materiálů
Name (in English): Editorial: Recent advances in the identification of stress-strain states of materials
RIV: Article in a journal. English. Switzerland.
Harničárová, Marta (203 Czech Republic, guarantor, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
Keywords in English: mechanical behavior; residual stress; stress-strain states; surface layers; surface texture
Changed by: Barbora Kroupová, učo 25655. Changed: 22/10/2024 14:32. -
KHALILIA, Walid, Marta HARNIČÁROVÁ, Tawfiq QUBBAJ, Yahya ISTAITIH, Aziz A. SALAMEH, Munqez J.Y. SHTAYA, Jan VALÍČEK, Sabri SAGHIR, Abdalhadi F. DEGHLES and Ahmed ABU SHABAN. STUDENT’S AWARENESS, KNOWLEDGE, AND PERCEPTIONS OF PRECISION AGRICULTURE TECHNOLOGY IN PALESTINIAN AGRICULTURAL FACULTIES. Academic Journal of Manufacturing Engineering. Cluj Napoca: Editura Politehnica, 2024, vol. 22, No 1, p. 135-144. ISSN 1583-7904.URL
Name in Czech: POVĚDOMÍ, ZNALOSTI A VNÍMÁNÍ TECHNOLOGIÍ PRECIZNÍHO ZEMĚDĚLSTVÍ STUDENTY PALESTINSKÝCH ZEMĚDĚLSKÝCH FAKULT
Name (in English): STUDENT’S AWARENESS, KNOWLEDGE, AND PERCEPTIONS OF PRECISION AGRICULTURE TECHNOLOGY IN PALESTINIAN AGRICULTURAL FACULTIES
RIV: Article in a journal. English. Romania.
Khalilia, Walid (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
Keywords in English: Drony; Vzdělávání; Internet věcí; Přesné zemědělství; Chytré zemědělství
Changed by: Barbora Kroupová, učo 25655. Changed: 22/10/2024 13:38. -
PAS, Jacek, Tomasz KLIMCZAK, Adam ROSINSKI, Marek STAWOWY, Stanislaw DUER and Marta HARNIČÁROVÁ. The Dynamic Change in the Reliability Function Level in a Selected Fire Alarm System during a Fire. Sensors. MDPI, 2024, vol. 24, No 13, p. 0-30, 30 pp. ISSN 1424-8220.URL
Name in Czech: Dynamická změna úrovně spolehlivosti vybraného systému požární signalizace při požáru
Name (in English): The Dynamic Change in the Reliability Function Level in a Selected Fire Alarm System during a Fire
RIV: Article in a journal. English. Switzerland.
Pas, Jacek (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
Keywords in English: fire alarm system; fire scenario; power supply; reliability; system
Changed by: Barbora Kroupová, učo 25655. Changed: 22/10/2024 13:26. -
KADNÁR, Milan, Peter KÁČER, Marta HARNIČÁROVÁ, Jan VALÍČEK, František TÓTH, Marián BUJNA, Milena KUŠNEROVÁ, Rastislav MIKUŠ and Marian BORŽAN. Comparison of Linear Regression and Artificial Neural Network Models for the Dimensional Control of the Welded Stamped Steel Arms. Mathematical machines and systems. Ukrajina: Institute of Mathematical Machines and Systems of the NAS of Ukraine, 2023, vol. 11, No 3, p. 1-18. ISSN 1028-9763.URL
RIV/75081431:_____/23:00002544 Article in a journal. English. Ukraine.
Kadnár, Milan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
Keywords in English: welding; distortion; stamping; model; prediction; neural network
Changed by: Barbora Kroupová, učo 25655. Changed: 26/4/2023 12:31. -
DANEL, Roman, Marta HARNIČÁROVÁ, Walid KHALILIA, Zuzana PALKOVÁ, Khalid HARDAN, Talat ABURAJABALTAMIMI, Yahya ISTAITIH, Jan VALÍČEK and Michal ŘEPKA. ERASMUS+ PROJECT 'BENEFIT' - BOOSTING INNOVATION IN DIGITAL FARMING. In Doucek Petr; Sonntag Michael; Nedomova Lea. IDIMT-2023. Hradec Králové: Trauner Verlag Universitat, 2023, p. 169-176. ISBN 978-3-99151-176-2. Available from: https://dx.doi.org/10.35011/IDIMT-2023-169.URL
Name in Czech: PROJEKT ERASMUS+ „BENEFIT“ – PODPORA INOVACE V DIGITÁLNÍM ZEMĚDĚLSTVÍ
RIV: Proceedings paper. English. Austria.
Danel, Roman (203 Czech Republic, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution)
Keywords in English: BENEFIT; Erasmus+;digital farming; precious agriculture; EU–Palestine cooperation; Agriculture 4.0; aquaponics farm
Type of proceedings: post-proceedings
International impact: yes
Reviewed: yes
Changed by: Ing. Roman Danel, Ph.D., učo 24564. Changed: 8/2/2024 22:50. -
VENCL, Aleksander, Petr SVOBODA, Simon KLANČNIK, Adrian BUT, Miloš VORKAPIĆ, Marta HARNIČÁROVÁ and Blaža STOJANOVIĆ. Influence of Al2O3 Nanoparticles Addition in ZA-27 Alloy-Based Nanocomposites and Soft Computing Prediction. Lubricants. Switzerland: MDPI, 2023, vol. 11, No 1, p. 1-13, 14 pp. ISSN 2075-4442.URL
Name in Czech: Vliv přidání nanočástic Al2O3 do nanokompozitů na bázi slitin ZA 27 s využitím Soft Computing Prediction
RIV/75081431:_____/23:00002497 Article in a journal. English. Switzerland.
Vencl, Aleksander (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
Keywords in English: ZA-27 alloy; Al2O3 nanoparticles; nanocomposites; wear; response surface methodology; artificial neural network
Changed by: Barbora Kroupová, učo 25655. Changed: 14/3/2023 15:08. -
KOPAL, Ivan, Ivan LABAJ, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Hakan TOZAN. Intelligent Modelling of the Real Dynamic Viscosity of Rubber Blends Using Parallel Computing. Polymers. Basel, Switzerland: MDPI, 2023, vol. 15, No 17, p. 1-20. ISSN 2073-4360.URL
RIV/75081431:_____/23:00002613 Article in a journal. English. Switzerland.
Kopal, Ivan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
Keywords in English: rubber blends; curing process; intelligent modelling; generalised regression neural network; parallel computing
Changed by: Barbora Kroupová, učo 25655. Changed: 4/12/2023 13:59. -
ŠAFÁŘ, Marek, Jan VALÍČEK, Marta HARNIČÁROVÁ, Michal ŠAJGALÍK, Hakan TOZAN, Milena KUŠNEROVÁ, Mário DRBÚL, Milan KADNÁR and Andrej CZÁN. Proposal for the identification of residual stresses after turning and hardening of bearing steel. Frontiers in Materials. LAUSANNE , SWITZERLAND: Frontiers Media S.A, 2023, vol. 10, Neuveden, p. 1-17. ISSN 2296-8016.URL
RIV/75081431:_____/23:00002614 Article in a journal. English. Switzerland.
Šafář, Marek (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
Keywords in English: residual stress; bearing steel; measurement; evaluation of measurement results; modelling
Changed by: Barbora Kroupová, učo 25655. Changed: 4/12/2023 14:18. -
VALÍČEK, Jan, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Zuzana PALKOVÁ, Ivan KOPAL, Cristina BORZAN, Andrej CZÁN, Rastislav MIKUŠ, Stanislaw DUER and Vladimír ŠEPÁLEK. Stress-strain parameter prediction method for AWJ technology from surface topography. International journal of advanced manufacturing technology. London, United Kingdom: Springer, 2023, vol. 127, 5-6, p. 2617-2635. ISSN 0268-3768.URL
RIV/75081431:_____/23:00002612 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
Valíček, Jan (203 Czech Republic, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: Surface roughness; Mechanical parameters; Abrasive waterjet; Material plasticity; Deformation
Changed by: Barbora Kroupová, učo 25655. Changed: 4/12/2023 12:46. -
LABAJ, Ivan, Petra SKALKOVÁ, Ivan KOPAL, Júlia VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Peter BOŠKO and Jana DOBROVSKÁ. Study of the influence of Chitosan on selected properties of elastomeric blends. Materialwissenschaft und Werkstofftechnik. Verlag Wiley-VCH, 2023, vol. 54, No 4, p. 429-440. ISSN 0933-5137.URL
RIV/75081431:_____/23:00002550 Article in a journal. English. Germany.
Labaj, Ivan (703 Slovakia, guarantor) -- Skalková, Petra (703 Slovakia) -- Kopal, Ivan (703 Slovakia) -- Vršková, Júlia (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Boško, Peter (703 Slovakia) -- Dobrovská, Jana (203 Czech Republic)
Keywords in English: chitosan; carbonblack; elastomericblends; naturalrubber; thermo-oxidativeaging
Changed by: Barbora Kroupová, učo 25655. Changed: 10/5/2023 13:30. -
STAWOWY, Marek, Stanisław DUER, Krzysztof PERLICKI, Tomasz MROZEK and Marta HARNIČÁROVÁ. Supporting Information Quality Management in Information and Communications Technology Systems with Uncertainty Modelling. Energies. Basel, Switzerland: MDPI, 2023, vol. 16, No 6, p. 1-18. ISSN 1996-1073.URL
RIV/75081431:_____/23:00002545 Article in a journal. English. Switzerland.
Stawowy, Marek (616 Poland, guarantor) -- Duer, Stanisław (616 Poland) -- Perlicki, Krzysztof (616 Poland) -- Mrozek, Tomasz (616 Poland) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
Keywords in English: traffic light power system; information quality; uncertainty modelling; information quality assessment; information quality management
Changed by: Barbora Kroupová, učo 25655. Changed: 26/4/2023 12:41. -
HARNIČÁROVÁ, Marta, Marek STAWOWY, Adam ROSIŃSKI, Jacek PAŚ, Stanislaw DUER and Krzysztof PERLICKI. The Reliability and Exploitation Analysis Method of the ICT System Power Supply with the Use of Modelling Based on Rough Sets. Energies, MDPI. Basel, Switzerland: MDPI, 2023, vol. 16, No 12, p. 1-18. ISSN 1996-1073.URL
RIV: Article in a journal. English. Switzerland.
Harničárová, Marta (203 Czech Republic, guarantor, belonging to the institution)
Keywords in English: power supply; rough sets; ICT system; modelling
Changed by: Barbora Kroupová, učo 25655. Changed: 4/12/2023 13:09. -
KOPAL, Ivan, Ivan LABAJ, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Darina ONDRUŠOVÁ, Jan KRMELA and Zuzana PALKOVÁ. A Generalized Regression Neural Network Model for Predicting the Curing Characteristics of Carbon Black-Filled Rubber Blends. Polymers. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, vol. 14, No 4, p. nestránkováno, 18 pp. ISSN 2073-4360.URL
RIV/75081431:_____/22:00002337 Article in a journal. English. Switzerland.
Kopal, Ivan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: rubber blends; curing process; modelling; generalized regression neural network
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 20/3/2023 17:22. -
PANDA, Anton, Volodymyr NAHORNYI, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Petr BARON, Iveta PANDOVÁ and Patrik SOROČIN. A novel method for online monitoring of surface quality and predicting tool wear conditions in machining of materials. The International Journal of Advanced Manufacturing Technology. Londýn, Spojené království: SPRINGER LONDON LTD, 2022, vol. 123, No 5, p. 3599-3612, 88 pp. ISSN 0268-3768.URL
RIV/75081431:_____/22:00002449 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
Keywords in English: Turning; Roughing; Finishing; Surface roughness; Tool wear degree
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 20:18. -
DELICE, Elif, Hakan TOZAN, Melis Almula KARADAYI, Marta HARNIČÁROVÁ and Başak TURAN. An Integrated Framework for Non-Traditional Machining Process Technology Selection in Healthcare Applications. TEHNICKI VJESNIK-TECHNICKÝ VĚSTNÍK. Slavonski Brod, Chorvatsko: Strojarski Facultet, Sveuciliste Josipa Jurja Strossmayera u Osijeki, 2022, vol. 29, No 6, p. 2137-2146. ISSN 1330-3651.URL
RIV/75081431:_____/22:00002450 Article in a journal. English. Croatia.
Delice, Elif (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
Keywords in English: best worst method; EDAS; health technology selection; multi-criteria decision making; non-traditional machining
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 20:20. -
PANDA, Anton, Kostiantyn DYADYURA, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Tatyana IVAKHNIUK, Liudmyla HREBENYK, Oleksandr SAPRONOV, Vitalii SOTSENKO, Pavlo VOROBIOV, Vitalii LEVYTSKYI, Andriy BUKETOV and Iveta PANDOVA. Ecotoxicity Study of New Composite Materials Based on Epoxy Matrix DER-331 Filled with Biocides Used for Industrial Applications. Polymers. Basel, Switzerland: MDPI, 2022, 14/2022, No 16, p. 3275-3302. ISSN 2073-4360.URL
RIV/75081431:_____/22:00002392 Article in a journal. English. Switzerland.
Panda, Anton (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
Keywords in English: epoxy-composite; antifouling; bioaccumulation; marine pollution; structure of surface; marine bacteria; Bifidobacterium bifidum; Lactobacillus acidophilus
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 21/3/2023 18:42. -
CZÁN, Andrej, Richard JOCH, Michal ŠAJGALÍK, Jozef HOLUBJÁK, Andrej HORÁK, Pavol TIMKO, Jan VALÍČEK, Milena KUŠNEROVÁ and Marta HARNIČÁROVÁ. Experimental Study and Verification of New Monolithic Rotary Cutting Tool for an Active Driven Rotation Machining. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 5, p. nestránkováno, 17 pp. ISSN 1996-1944.URL
RIV/75081431:_____/22:00002338 Article in a journal. English. Switzerland.
Czán, Andrej (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
Keywords in English: turning; rotary tool; cutting force; actively driven tool; surface texture
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 20/3/2023 17:24. -
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Stanislaw DUER, Milena KUŠNEROVÁ, Zuzana PALKOVÁ and Zuzana MITAĽOVÁ. Express diagnostics of stress-strain states of materials. Materialwissenschaft und Werkstofftechnik. Weinheim, Germany: Verlag Wiley-VCH, 2022, 53/2022, No 4, p. 394-401. ISSN 0933-5137.URL
RIV/75081431:_____/22:00002341 Article in a journal. English. Germany.
Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: Ultrasound; non-destructive diagnostics; stress-strain curve
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 20/3/2023 17:30. -
KOVÁČ, Ivan, Rastislav MIKUŠ, Jozef ŽARNOVSKÝ, Róbert DRLIČKA, Marta HARNIČÁROVÁ, Jan VALÍČEK and Milan KADNÁR. Increasing the wear resistance of surface layers of selected steels by TIG electric arc surface remelting process using a powder based on CaCN2. The International Journal of Advanced Manufacturing Technology. Londýn, Spojené království Velké Británi: SPRINGER LONDON LTD, 2022, vol. 123, No 5, p. 1985-1997, 14 pp. ISSN 0268-3768.URL
RIV/75081431:_____/22:00002448 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
Kováč, Ivan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
Keywords in English: TIG surface remelting; CaCN2-based powder; Hardness; Wear resistance
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 20:17. -
NAHORNYI, Volodymyr, Anton PANDA, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Iveta PANDOVÁ, Stanislaw LEGUTKO, Zuzana PALKOVÁ and Ondrej LUKÁČ. Method of Using the Correlation between the Surface Roughness of Metallic Materials and the Sound Generated during the Controlled Machining Process. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 3, p. nestránkováno, 22 pp. ISSN 1996-1944.URL
RIV/75081431:_____/22:00002339 Article in a journal. English. Switzerland.
Nahornyi, Volodymyr (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: steel; CNC lathe; generated sound; surface roughness; tool wear; adaptive control of the cutting process
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 20/3/2023 17:25. -
PALKOVÁ, Zuzana, Marta HARNIČÁROVÁ, Jan VALÍČEK, Vojtěch STEHEL, Walid Mahmoud KHALILIA, Nikolay MIHAILOV, Maria FRAGKAKI and Aziz Abdel Karim Awad SALAMEH. Perspective of education in Agriculture 4.0 in selected countries in European Union and Palestine. Online. In Boris Evstatiev. 2022 8th International Conference on Energy Efficiency and Agricultural Engineering, EE and AE 2022. 8th ed. Ruse, Bulgaria: Institute of Electrical and Electronics Engineers Inc. (IEEE), 2022, p. nestránkováno, 677 pp. ISBN 978-1-6654-0709-0.URL
RIV/75081431:_____/22:00002391 Proceedings paper. English. Bulgaria.
Palková, Zuzana (703 Slovakia, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution)
Keywords in English: precision agriculture; digitalization; rural areas; Palestine; BENEFIT project
Type of proceedings: post-proceedings
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 12/9/2022 08:57. -
GAVLAS, Martin, Michal KACO, Vladimir DEKÝŠ, Miroslav ŠPIRIAK, Silvia SLABEJOVÁ, Andrej CZÁN, Jozef HOLUBJAK, Milena KUŠNEROVÁ, Marta HARNIČÁROVÁ and Jan VALÍČEK. Research on the Oscillation in Centerless Grinding Technology When Machining Bearing Steel. Materials. Basel, Switzerland: MDPI, 2022, neuveden, 15/2022, p. nestránkováno, 14 pp. ISSN 1996-1944.URL
RIV/75081431:_____/22:00002387 Article in a journal. English. Switzerland.
Gavlas, Martin (guarantor) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
Keywords in English: centerless grinding; vibrodiagnostics; analysis of the run-up and run-down; boxplot; spectral analysis; STFT; geometric deviation
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 21/3/2023 18:34. -
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Ivan KOPAL, Miloslav LUPTÁK, Rastislav MIKUŠ, Zdeněk PAVELEK, Martin FABIÁN and Vladimír ŠEPEĽÁK. Structural and Mechanical Changes of AlMgSi0.5 Alloy during Extrusion by ECAP Method. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 6, p. nestránkováno, 22 pp. ISSN 1996-1944.URL
RIV/75081431:_____/22:00002340 Article in a journal. English. Switzerland.
Harničárová, Marta (203 Czech Republic, guarantor, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Pavelek, Zdeněk (203 Czech Republic, belonging to the institution) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
Keywords in English: aluminium alloy; intensive plastic deformation method; microstructure; mechanical properties
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 20/3/2023 17:28. -
KHALILIA, Walid, Miroslav GOMBÁR, Zuzana PALKOVÁ, Michal PALKO, Jan VALÍČEK and Marta HARNIČÁROVÁ. Using Virtual Reality as Support to the Learning Process of Forensic Scenarios. IEEE Access. New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2022, vol. 2022, neuvedeno, p. 83297-83310. ISSN 2169-3536.URL
RIV/75081431:_____/22:00002394 Article in a journal. English. United States of America.
Khalilia, Walid (guarantor) -- Palková, Zuzana (703 Slovakia, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
Keywords in English: Forensic science; learning strategies; problem solving; virtual reality
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 21/3/2023 18:47. -
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Zuzana PALKOVÁ, Ivan KOPAL, Cristina BORZAN, Milan KADNÁR and Stanislav PAULOVIČ. A New Method of Predicting the Structural and Mechanical Change of Materials during Extrusion by the Method of Multiple Plastic Deformations. Materials. Basel, Switzerland: MDPI, 2021, volume 14, No 10, p. 2594-2616. ISSN 1996-1944.URL
RIV/75081431:_____/21:00002097 Article in a journal. English. Switzerland.
Harničárová, Marta (203 Czech Republic, guarantor, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: welding; distortion; stamping; model; prediction
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 25/6/2021 08:49. -
KUŠNEROVÁ, Milena, Michal ŘEPKA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Roman DANEL and Zuzana PALKOVÁ. A study of the connection between bending stress and belt friction using a servomotor controlled by a computer. IEEE Access. IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2021, vol. 9, No 2021, p. 11173-11182. ISSN 2169-3536. Available from: https://dx.doi.org/10.1109/ACCESS.2021.3049971.URL
Name in Czech: Studie vztahu mezi ohybovým napětím a třením pásu pomocí servomotoru řízeného počítačem
RIV/75081431:_____/21:00001966 Article in a journal. English. United States of America.
Kušnerová, Milena (203 Czech Republic, guarantor, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Danel, Roman (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: engineering educational process; friction; bending coefficient; belt
Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 31/3/2021 12:46. -
DUER, Stanisław, Konrad ZAJKOWSKI, Marta HARNIČÁROVÁ, Henryk CHARUN and Dariusz BERNATOWICZ. Examination of Multivalent Diagnoses Developed by a Diagnostic Program with an Artificial Neural Network for Devices in the Electric Hybrid Power Supply System “House on Water”. Energies. SWITZERLAND: MDPI, 2021, volume 14/, No 8, p. nestránkováno, 19 pp. ISSN 1996-1073.URL
RIV/75081431:_____/21:00002098 Article in a journal. English. Switzerland.
Duer, Stanisław (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
Keywords in English: technical diagnostics; diagnostic reasoning; multivalent logic; artificial intelligence; hybrid power systém
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 25/6/2021 09:17. -
FABIAN, Martin, Dirk MENZEL, Anatoly Ye YERMAKOV, Hristo KOLEV, Maria KAŇUCHOVÁ, Jianmin SHI, Jaroslav KOVÁČ, Nina KOSTOVA, Da Silva KLEBSON L., Senna MAMORU, Marta HARNIČÁROVÁ, Jan VALÍČEK, Hahn HORST and Vladimír ŠEPEĽÁK. Nanostructure and magnetic anomaly of mechanosynthesized Ce1-xYxO2-delta (x <= 0.3) solid solutions. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS. Neuveden: PERGAMON-ELSEVIER SCIENCE LTD, 2021, vol. 148, January, p. 1-7. ISSN 0022-3697. Available from: https://dx.doi.org/10.1016/j.jpcs.2020.109673.URL
Name in Czech: Nanostruktura a magnetická anomálie mechanosyntetizovaného Ce1-xYxO2-delta (x <= 0.3) pevné roztoky
RIV/75081431:_____/21:00001936 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
Fabian, Martin (703 Slovakia, guarantor) -- Menzel, Dirk (276 Germany) -- Yermakov, Anatoly Ye (643 Russian Federation) -- Kolev, Hristo (703 Slovakia) -- Kaňuchová, Maria (703 Slovakia) -- Shi, Jianmin (276 Germany) -- Kováč, Jaroslav (703 Slovakia) -- Kostova, Nina (100 Bulgaria) -- Klebson L., Da Silva (76 Brazil) -- Mamoru, Senna (392 Japan) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Horst, Hahn (276 Germany) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
Keywords in English: Ceria-yttria solid solution; Mechanosynthesis; Room-temperature ferromagnetism; Oxygen vacancies
Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 4/2/2021 12:59. -
KADNÁR, Milan, Peter KÁČER, Marta HARNIČÁROVÁ, Jan VALÍČEK, Mirek GOMBÁR, Milena KUŠNEROVÁ, František TÓTH, Marian BORŽAN and Juraj RUSNÁK. Prediction Model of the Resulting Dimensions of Welded Stamped Parts. Materials. Basel, Switzerland: MDPI, 2021, volume 14/, No 11, p. 3062-3078. ISSN 1996-1944.URL
RIV/75081431:_____/21:00002096 Article in a journal. English. Switzerland.
Kadnár, Milan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
Keywords in English: welding; distortion; stamping; model; prediction
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 25/6/2021 08:27. -
PACURAR, Razvan, Petru BERCE, Anna PETRILAK, Ovidiu NEMES, Cristina Stefana Miron BORZAN, Marta HARNIČÁROVÁ and Ancuta PACURAR. Selective Laser Melting of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, and Morphological and Mechanical Characterization. Materials. Basel, Switzerland: MDPI, 2021, vol. 14, No 15, p. nestránkováno, 19 pp. ISSN 1996-1944.URL
RIV/75081431:_____/21:00002158 Article in a journal. English. Switzerland.
Pacurar, Razvan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
Keywords in English: selective laser sintering; hip implants; acetabular liner; surface roughness; compression; finite element analysis; contact pressure; paraxylene immersion
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 8/10/2021 09:25. -
LUCENILDO DA SILVA, Klebson, Rafael SANTIAGO TRAUTWEIN, Rodolfo BEZERRA DA SILVA, Martin FABIÁN, Erik ČIŽMÁR, Mariia HOLUB, Olha SKURIKHINA, Marta HARNIČÁROVÁ, Vladimír GIRMAN, Dirk MENZEL, Klaus Dieter BECKER, Horst HAHN and Vladimír ŠEPEĽÁK. Suppression of the Cycloidal Spin Arrangement in BiFeO3 Caused by the Mechanically Induced Structural Distortion and Its Effect on Magnetism. Frontiers in Materials. AVENUE DU TRIBUNAL FEDERAL 34, LAUSANNE: Frontiers Media S.A, 2021, volume 8, No 2021, p. nestránkováno, 9 pp. ISSN 2296-8016.URL
RIV/75081431:_____/21:00002236 Article in a journal. English. Switzerland.
Lucenildo Da Silva, Klebson (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
Keywords in English: multiferroic; bismuth ferrite; cycloidal spin arrangement; mechanochemistry; Mössbauer spectroscopy
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 14/1/2022 09:20. -
KUŠNEROVÁ, Milena, Michal ŘEPKA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Roman DANEL, Ján KMEC and Zuzana PALKOVÁ. A new way of measuring the belt friction coefficient using a digital servomotor. Measurement: Journal of the International Measurement Confederation. Netherlands: Elsevier B.V., 2020, vol. 150, January 2020, p. nestránkováno, 2 pp. ISSN 0263-2241. Available from: https://dx.doi.org/10.1016/j.measurement.2019.107100.URL
Name in Czech: Nový způsob měření koeficientu tření pásu pomocí digitálního servomotoru
RIV/75081431:_____/20:00001697 Article in a journal. English. Netherlands.
Kušnerová, Milena (203 Czech Republic, guarantor, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Danel, Roman (203 Czech Republic, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: Belt friction coefficient; Computer-controlled experiment; Digital servomotor; Euler frictional force
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:42. -
PANDOVÁ, Iveta, Miroslav RIMÁR, Anton PANDA, Jan VALÍČEK, Milena KUŠNEROVÁ and Marta HARNIČÁROVÁ. A Study of Using Natural Sorbent to Reduce Iron Cations from Aqueous Solutions. International Journal of Environmental Research and Public Health. Basel: MDPI, 2020, vol. 17, No 10, p. 1-17. ISSN 1660-4601. Available from: https://dx.doi.org/10.3390/ijerph17103686.URL
Name in Czech: Studie používání přírodního sorbentu ke snížení kationtů železa z vodných roztoků
RIV/75081431:_____/20:00001925 Article in a journal. English. Switzerland.
Pandová, Iveta (703 Slovakia, guarantor) -- Rimár, Miroslav (703 Slovakia) -- Panda, Anton (703 Slovakia) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
Keywords in English: zeolite clinoptilolite; ferric cations; wastewater; sorption; adsorption isotherm
Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 18/1/2021 11:36. -
SKURIKHINA, O., M. SENNA, M. FABIÁN, R. WITTE, R. TARASENKO, V. TKÁČ, M. ORENDÁČ, M. KAŇUCHOVÁ, V. GIRMAN, E. TÓTHOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Vladimír ŠEPEĽÁK. A sustainable reaction process for phase pure LiFeSi2O6 with goethite as an iron source. Ceramics International. Nizozemsko: Elsevier Ltd, 2020, vol. 46, No 10, p. 14894-14901. ISSN 0272-8842. Available from: https://dx.doi.org/10.1016/j.ceramint.2020.03.016.URL
Name in Czech: Udržitelný reakční proces pro fázově čistý LiFeSi2O6 s goethitem jako zdrojem železa
RIV/75081431:_____/20:00001762 Article in a journal. English. Netherlands.
Skurikhina, O. (703 Slovakia, guarantor) -- Senna, M. (392 Japan) -- Fabián, M. (703 Slovakia) -- Witte, R. (276 Germany) -- Tarasenko, R. (703 Slovakia) -- Tkáč, V. (703 Slovakia) -- Orendáč, M. (703 Slovakia) -- Kaňuchová, M. (703 Slovakia) -- Girman, V. (703 Slovakia) -- Tóthová, E. (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
Keywords in English: Goethite; LiFeSi2O6; Mechanochemistry; Mössbauer spectroscopy; Reactivity of solid mixture
Changed by: Kateřina Nygrýnová, učo 23736. Changed: 8/6/2020 12:33. -
ŠAJGALÍK, Michal, Milena KUŠNEROVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Andrej CZÁN, Tatiana CZÁNOVÁ, Mário DRBÚL, Marian BORZAN and Ján KMEC. Analysis and Prediction of the Machining Force Depending on the Parameters of Trochoidal Milling of Hardened Steel. Applied Sciences (Switzerland). Basel: MDPI AG, 2020, vol. 10, No 5, p. 1 - 19. ISSN 2076-3417. Available from: https://dx.doi.org/10.3390/app10051788.URL
Name in Czech: Analýza a predikce obráběcí síly v závislosti na parametrech trochoidálního frézování kalené oceli
RIV/75081431:_____/20:00001734 Article in a journal. English. Switzerland.
Šajgalík, Michal (703 Slovakia, guarantor) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Czán, Andrej (703 Slovakia) -- Czánová, Tatiana (703 Slovakia) -- Drbúl, Mário (703 Slovakia) -- Borzan, Marian (642 Romania) -- Kmec, Ján (703 Slovakia, belonging to the institution)
Keywords in English: Hardened steel; Machining forces; Model; Prediction; Trochoidal milling
Changed by: Ing. Anna Palokha, učo 18083. Changed: 6/5/2020 09:16. -
PANDA, Anton, Volodymyr NAHORNYI, Jan VALÍČEK, Marta HARNIČÁROVÁ, Iveta PANDOVÁ, Cristina BORZAN, Samuel CEHELSKÝ, Lukas ANDROVIČ, Hakan TOZAN and Milena KUŠNEROVÁ. Application of cardio-forecasting for evaluation of human—operator performance. International Journal of Environmental Research and Public Health. Švýcarsko: Multidisciplinary Digital Publishing Institute (MDPI), 2020, vol. 17, No 1, p. nestránkováno, 12 pp. ISSN 1661-7827. Available from: https://dx.doi.org/10.3390/ijerph17010326.URL
Name in Czech: Aplikace kardio predikce pro hodnocení výkonu člověka - operátora
RIV/75081431:_____/20:00001705 Article in a journal. English. Switzerland.
Panda, Anton (703 Slovakia, guarantor) -- Nahornyi, Volodymyr (804 Ukraine) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Pandová, Iveta (703 Slovakia) -- Borzan, Cristina (642 Romania) -- Cehelský, Samuel (703 Slovakia) -- Androvič, Lukas (703 Slovakia) -- Tozan, Hakan (792 Turkey) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
Keywords in English: Cardiogram; Identification of model parameters; Individual limit of working capacity; Model coefficients; Trend model; Trend of heart rate amplitude
Changed by: Ing. Anna Palokha, učo 18083. Changed: 23/4/2020 10:46. -
KRMELOVÁ, Vladimíra, Ivan KOPAL, Mária GAVENDOVÁ, Ivan LABAJ, Ján KRMELA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Peter HYBLER and Tomáš ZATROCH. A Study of the Effect of the Quinacridone Pigment Content and Storage Time on the Process of Crystallization of Pre-oriented Polypropylene/Quinacridone Fibres. Advanced Structured Materials. Switzerland: Springer, 2020, vol. 124, No 2020, p. 321-336. ISSN 1869-8433. Available from: https://dx.doi.org/10.1007/978-3-030-39062-4_26.URL
Name in Czech: Studie vlivu obsahu chinakridonového pigmentu a doby skladování na proces krystalizace předem orientovaných vláken polypropylenu / chinakridonu
RIV: Article in a journal. English. Switzerland.
Krmelová, Vladimíra (703 Slovakia, guarantor) -- Kopal, Ivan (703 Slovakia) -- Gavendová, Mária (703 Slovakia) -- Labaj, Ivan (703 Slovakia) -- Krmela, Ján (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Hybler, Peter (703 Slovakia) -- Zatroch, Tomáš (703 Slovakia)
Keywords in English: Crystallinity of polymers; Differential scanning kalorimetry; Polypropylene fibres; Quinacridone pigments
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:44. -
KOPAL, Ivan, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Darina ONDRUŠOVÁ, Ján KRMELA and Peter HYBLER. ATR-FTIR Analysis of Melamine Resin, Phenol-Formaldehyde Resin and Acrylonitrile-Butadiene Rubber Blend Modified by High-Energy Electron Beam Radiation. Advanced Structured Materials. Switzerland: Springer, 2020, vol. 124, No 2020, p. 295-307. ISSN 1869-8433. Available from: https://dx.doi.org/10.1007/978-3-030-39062-4_24.URL
Name in Czech: ATR-FTIR analýza melaminové pryskyřice, fenolformaldehydové pryskyřice a směsi akrylonitril-butadienového kaučuku modifikovaná vysokoenergetickým zářením elektronového paprsku
RIV: Article in a journal. English. Switzerland.
Kopal, Ivan (703 Slovakia, guarantor) -- Vršková, Juliána (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Ondrušová, Darina (703 Slovakia) -- Krmela, Ján (703 Slovakia) -- Hybler, Peter (703 Slovakia)
Keywords in English: unlisted
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:45. -
MITAL'OVA, Zuzana, Dusan MITAL, Frantisek BOTKO, Juliana LITECKA, Jozef ZAJAC, Marta HARNIČÁROVÁ and Jan VALÍČEK. Identification of Topography of Surfaces Created by Turning Biomaterials with Optical Profilometry. BIORESOURCES. Neuveden: NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI, 2020, vol. 15, No 2, p. 2483 - 2494. ISSN 1930-2126. Available from: https://dx.doi.org/10.15376/biores.15.2.2483-2494.URL
Name in Czech: Identifikace topografie povrchů vytvořených soustružením biomateriálů s optickou profilometrií
RIV/75081431:_____/20:00001937 Article in a journal. English. United States of America.
Mital'ova, Zuzana (703 Slovakia, guarantor) -- Mital, Dusan (703 Slovakia) -- Botko, Frantisek (703 Slovakia) -- Zajac, Jozef (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
Keywords in English: Natural reinforcement; Wood-plastic composite; Topography of surface
Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 4/2/2021 13:52. -
KMEC, Ján, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, Roman DANEL and Michal ŘEPKA. Metody řízení a plánování produkčních procesů (Methods of management and planning of production processes). 1.ed. Polsko: Wydavnictwo Sztafeta, 2020, 134 pp. ISBN 978-83-954599-9-3.
Name (in English): Methods of management and planning of production processes
RIV/75081431:_____/20:00002253 Book on a specialized topic. English. Poland.
Kmec, Ján (703 Slovakia, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Danel, Roman (203 Czech Republic, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution)
Keywords in English: Methods of production management; production processes and production systems; production process planning
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/2/2022 09:35. -
KOPAL, Ivan, Juliana VRŠKOVÁ, Alžběta BAKOŠOVÁ, Marta HARNIČÁROVÁ, Ivan LABAJ, Darina ONDRUŠOVÁ, Jan VALÍČEK and Jan KRMELA. Modelling the Stiffness-Temperature Dependence of Resin-Rubber Blends Cured by High-Energy. Polymers. Basel: MDPI, 2020, vol. 12, No 11, p. 1 - 18. ISSN 2073-4360. Available from: https://dx.doi.org/10.3390/polym12112652.URL
Name in Czech: Modelování závislosti tuhosti a teploty směsí pryskyřice a kaučuku vytvrzovaných vysokou energií
RIV/75081431:_____/20:00001930 Article in a journal. English. Switzerland.
Kopal, Ivan (703 Slovakia, guarantor) -- Vršková, Juliana (703 Slovakia) -- Bakošová, Alžběta (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Labaj, Ivan (703 Slovakia) -- Ondrušová, Darina (703 Slovakia) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Krmela, Jan (203 Czech Republic)
Keywords in English: resin-rubber blends; dynamic mechanical analysis; Weibull distribution; genetic algorithm; electron-beam irradiation
Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/1/2021 10:48. -
DIMACHE, A. - N., Ghiocel GROZA, Marilena JIANU, Sorin PERJU, Laurențiu RECE, Marta HARNIČÁROVÁ and Jan VALÍČEK. Optimization of the Solution of a Dispersion Model. Mathematics. MDPI AG, 2020, vol. 8, No 3, p. 1 - 11. ISSN 2227-7390. Available from: https://dx.doi.org/10.3390/math8030318.URL
Name in Czech: Optimalizace řešení disperzního modelu
RIV/75081431:_____/20:00001733 Article in a journal. English. Romania.
Dimache, A. - N. (642 Romania, guarantor) -- Groza, Ghiocel (642 Romania) -- Jianu, Marilena (642 Romania) -- Perju, Sorin (642 Romania) -- Rece, Laurențiu (642 Romania) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
Keywords in English: Dispersion model; Least-squares method; Residence time distribution; Variable separation method
Changed by: Ing. Anna Palokha, učo 18083. Changed: 6/5/2020 09:00. -
RECE, Laurentiu, Virgil FLORESCU, Arina MODREA, Victor JEFLEA, Marta HARNIČÁROVÁ, Jan VALÍČEK and Marian BORZAN. Optimization of the 2 1/2 d processing method of complex parts, through a predictive algorithm for controlling the geometric shape deviations resulting from processing. Mathematics. BASEL, SWITZERLAND: MDPI, 2020, vol. 8, No 1, p. nestránkováno, 24 pp. ISSN 2227-7390. Available from: https://dx.doi.org/10.3390/math8010059.URL
Name in Czech: Optimalizace metody zpracování 2 1/2 d složitých dílů pomocí prediktivního algoritmu pro řízení odchylek geometrických tvarů vyplývajících ze zpracování
RIV/75081431:_____/20:00001712 Article in a journal. English. Switzerland.
Rece, Laurentiu (642 Romania, guarantor) -- Florescu, Virgil (642 Romania) -- Modrea, Arina (642 Romania) -- Jeflea, Victor (642 Romania) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Borzan, Marian (642 Romania)
Keywords in English: Control of the deviations of geometric forms; Manufacturing in 2 1/2 D; Manufacturing of complex surfaces; Mathematical model Mathematics; Numerical control; Optimal manufacturing
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:44. -
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Ivan KOPAL, Júlia LITECKÁ, Milan KADNÁR, Ján KMEC and Zuzana PALKOVÁ. Prediction of shortening and material grain size after extrusion using the ecap method. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020, vol. 400, No 2020, p. 91-105. ISSN 1012-0386. Available from: https://dx.doi.org/10.4028/www.scientific.net/DDF.400.91.URL
Name in Czech: Predikce zkrácení a velikosti zrna materiálu po vytlačování metodou ecap
RIV/75081431:_____/20:00001738 Article in a journal. English. Switzerland.
Harničárová, Marta (203 Czech Republic, guarantor, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Kopal, Ivan (703 Slovakia) -- Litecká, Júlia (703 Slovakia) -- Kadnár, Milan (703 Slovakia) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: ECAP method; grain size; surface roughness; structure
Changed by: Ing. Anna Palokha, učo 18083. Changed: 14/5/2020 14:36. -
KMEC, Ján, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, Roman DANEL and Michal ŘEPKA. Progresivní technologie produkčních procesů (Progressive technology of production processes). 1st ed. Polsko: Wydavnictwo Sztafeta, 2020, 309 pp. ISBN 978-83-66528-00-0.
Name (in English): Progressive technology of production processes
RIV/75081431:_____/20:00002252 Book on a specialized topic. Czech. Poland.
Kmec, Ján (703 Slovakia, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Danel, Roman (203 Czech Republic, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution)
Keywords in English: production process; progressive technologies; mechanical; chemical; electrochemical; electrothermal; energy-current; hydroerosive; rapid prototyping; sodering; innovative processes
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/2/2022 09:21. -
VALÍČEK, Jan, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, M. ŠAJGALÍK, Ján KMEC, I. KOPAL, A. PANDA and Zuzana PALKOVÁ. Reverse reconstruction of surface topography from residual stress after chip-forming machining of the material. Materialwissenschaft und Werkstofftechnik. Německo: Wiley-VCH Verlag, 2020, vol. 51, No 5, p. 579-585. ISSN 0933-5137. Available from: https://dx.doi.org/10.1002/mawe.202000017.URL
Name in Czech: Reverzní rekonstrukce povrchové topografie ze zbytkového napětí po třískovém obrábění materiálu
RIV/75081431:_____/20:00001756 Article in a journal. English. Germany.
Valíček, Jan (203 Czech Republic, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Šajgalík, M. (703 Slovakia) -- Kmec, Ján (203 Czech Republic, belonging to the institution) -- Kopal, I. (703 Slovakia) -- Panda, A. (703 Slovakia) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: Residual stress; surface roughness; chip-forming machining; deformation; mechanical properties
Changed by: Kateřina Nygrýnová, učo 23736. Changed: 5/6/2020 08:20. -
KMEC, Ján, M. GOMBÁR, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, J. KŘÍŽ, M. KADNÁR, Monika KARKOVÁ and A. VAGASKÁ. The predictive model of surface texture generated by abrasivewater jet for austenitic steels. Applied Sciences (Switzerland). Switzerland: MDPI AG, 2020, vol. 10, No 9, p. nestránkováno, 22 pp. ISSN 2076-3417. Available from: https://dx.doi.org/10.3390/app10093159.URL
Name in Czech: Prediktivní model povrchové textury vytvořený abrazivním vodním paprskem pro austenitické oceli
RIV/75081431:_____/20:00001769 Article in a journal. English. Switzerland.
Kmec, Ján (703 Slovakia, guarantor, belonging to the institution) -- Gombár, M. (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Kříž, J. (203 Czech Republic) -- Kadnár, M. (703 Slovakia) -- Karková, Monika (703 Slovakia, belonging to the institution) -- Vagaská, A. (703 Slovakia)
Keywords in English: Abrasive mass flow; Abrasive nozzle diameter; Abrasive water jet; Cutting head feed rate; High-pressure water flow; Material thickness; Stainless steel; Surface roughness
Changed by: Kateřina Nygrýnová, učo 23736. Changed: 16/6/2020 12:54. -
VALÍČEK, Jan, Andrej CZÁN, Marta HARNIČÁROVÁ, Michal ŠAJGALÍK, Milena KUŠNEROVÁ, Tatiana CZÁNOVÁ, Ivan KOPAL, Miroslav GOMBÁR, Ján KMEC and Marek ŠAFÁŘ. A new way of identifying, predicting and regulating residual stress after chip-forming machining. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES. Oxford, England: PERGAMON-ELSEVIER SCIENCE LTD, 2019, vol. 155, MAY, p. 343-359. ISSN 0020-7403. Available from: https://dx.doi.org/10.1016/j.ijmecsci.2019.03.007.URL
Name in Czech: Nový způsob identifikace, predikce a regulace zbytkového napětí po třískovém obrábění
Name (in English): A new way of identifying, predicting and regulating residual stress after chip-forming machining
RIV/75081431:_____/19:00001546 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
Valíček, Jan (203 Czech Republic, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Gombár, Miroslav (703 Slovakia) -- Kmec, Ján (703 Slovakia, belonging to the institution)
Keywords in English: Residual stress; Surface topography; Milling Stress–strain Deformation; Surface-roughness; Emission
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 15:13. -
PALKOVÁ, Zuzana, Marta HARNIČÁROVÁ and Jan VALÍČEK. CLEAN AIR CURRICULUM AS A BASE FOR CLEAN ENVIRONMENT. Online. In Chova, LG; Martinez, AL; Torres, IC. ICERI Proceedings. Španělsko: IATED-INT ASSOC TECHNOLOGY EDUCATION & DEVELOPMENT, LAURI VOLPI 6, VALENICA, BURJASSOT 46100, SPAIN, 2019, p. 2261-2266. ISBN 978-84-09-14755-7.
Name in Czech: ČISTÉ VZDUCHOVÉ KURICIKUM JAKO ZÁKLAD PRO ČISTÉ PROSTŘEDÍ
RIV/75081431:_____/19:00001763 Proceedings paper. English. Spain.
Palková, Zuzana (703 Slovakia, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
Keywords in English: clean air; interactive learning modules; video materials; training; curriculum; Erasmus
Changed by: Kateřina Nygrýnová, učo 23736. Changed: 8/6/2020 13:31. -
PANDA, Anton, Volodymyr NAHORNYI, Iveta PANDOVÁ, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Jan VALÍČEK and Ján KMEC. Development of the method for predicting the resource of mechanical systems. International Journal of Advanced Manufacturing Technology. Londýn: Springer London, 2019, vol. 105, 1-4, p. 1563-1571. ISSN 0268-3768. Available from: https://dx.doi.org/10.1007/s00170-019-04252-6.URL
Name in Czech: Vývoj metody pro predikci zdroje mechanických systémů
RIV/75081431:_____/19:00001698 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
Panda, Anton (703 Slovakia, guarantor) -- Nahornyi, Volodymyr (804 Ukraine) -- Pandová, Iveta (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution)
Keywords in English: Critical condition; Individual resource; Resource forecast identification trend of the monitored parameter trend model condition of the supervised equipment
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:28. -
DANEL, Roman, Michal ŘEPKA, Zuzana PALKOVÁ, Milena KUŠNEROVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Ján KMEC. EXPERIENCES AND NEW TRENDS IN TEACHING AUTOMATION AND INFORMATICS AT FACULTIES NOT PRIMARILY INVOLVED IN COMPUTER SCIENCE. Online. In Chova, LG; Martinez, AL; Torres, IC. ICERI Proceedings. Španělsko: IATED-INT ASSOC TECHNOLOGY EDUCATION & DEVELOPMENT, LAURI VOLPI 6, VALENICA, BURJASSOT 46100, SPAIN, 2019, p. 2964-2971. ISBN 978-84-09-14755-7.
Name in Czech: ZKUŠENOSTI A NOVÉ TRENDY V UČITELSKÉ AUTOMATIZACI A INFORMATICE NA FAKULTÁCH, KTERÉ NEJSOU PRIMÁRNĚ ZAHRNUTÉ DO POČÍTAČOVÉ VĚDY
RIV/75081431:_____/19:00001764 Proceedings paper. English. Spain.
Danel, Roman (203 Czech Republic, guarantor, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution)
Keywords in English: Teaching programming; videoconference system; remote access to laboratory; digital media in teaching; requirements for IT graduates
Type of proceedings: post-proceedings
Changed by: Kateřina Nygrýnová, učo 23736. Changed: 9/6/2020 15:14. -
GOMBÁR, Miroslav, Alena VAGANSKÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, Andrej CZÁN and Ján KMEC. Experimental Analysis of the Influence of Factors Acting on the Layer Thickness Formed by Anodic Oxidation of Aluminium. Coatings. Basel, Switzerland: MDPI AG, 2019, vol. 9, No 1, p. 1-21, 22 pp. ISSN 2079-6412.
Name in Czech: Experimentální analýza vlivu faktorů Působí na tloušťku vrstvy vytvořenou Anodicem Oxidace hliníku
RIV/75081431:_____/19:00001410 Article in a journal. English. Switzerland.
Gombár, Miroslav (703 Slovakia, guarantor) -- Vaganská, Alena (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Czán, Andrej (703 Slovakia) -- Kmec, Ján (703 Slovakia, belonging to the institution)
Keywords in English: anodic oxidation of aluminium; statistical and technological model; thickness of the conversion coatings
ERROR! Není vyplněn způsob publikování.
Changed by: Mgr. Eva Hynešová, učo 23116. Changed: 13/3/2019 10:51. -
VACHO, Lukáš, Martin OLEJÁR, Dušan HRUBÝ, Vladimír CVIKLOVIČ, Jan VALÍČEK, Zuzana PALKOVÁ, Marta HARNIČÁROVÁ and Hakan TOZAN. Identification of dynamics of movement of the differential mobile robotic platform controlled by fuzzy controller. Tehnicki Vjesnik. Osijek, Chorvatsko: Sveuciliste Josipa Jurja Strossmayera u Osijeku, 2019, vol. 26, No 6, p. 1642-1649. ISSN 1330-3651. Available from: https://dx.doi.org/10.17559/TV-20181220081543.URL
Name in Czech: Identifikace dynamiky pohybu diferenciální mobilní robotické platformy ovládané fuzzy řadičem
RIV/75081431:_____/19:00001696 Article in a journal. English. Croatia.
Vacho, Lukáš (703 Slovakia, guarantor) -- Olejár, Martin (703 Slovakia) -- Hrubý, Dušan (703 Slovakia) -- Cviklovič, Vladimír (703 Slovakia) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Tozan, Hakan (792 Turkey)
Keywords in English: Dynamic systém; Fuzzy controller; Incremental sensor; Mobile robot; Modelling
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:27. -
DANEL, Roman, Michal ŘEPKA, Jan VALÍČEK, Milena KUŠNEROVÁ and Marta HARNIČÁROVÁ. Innovation of dispatching information system in underground gas storage třanovice including involvement of students in solving partial problems. In Doucek Petr, Chroust Gerhard, Oškrdal Václav. IDIMT 2019: Innovation and Transformation in a Digital World. Linz, Austria: Trauner Verlag Universitat, 2019, p. 119 - 126. ISBN 978-3-99062-590-3.
Name in Czech: Inovace z dispečerského informačního systému do podzemního zásobníku plynu Třanovice včetně zapojení studentů při řešení dílčích problémů
RIV/75081431:_____/19:00001693 Proceedings paper. English. Austria.
Danel, Roman (203 Czech Republic, guarantor, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
Keywords in English: Dispatching information systém; Gas flow balance; SCADA; Underground gas storage (UGS); Visual Basic 6 to Visual BasicNET conversion
Type of proceedings: post-proceedings
Changed by: Ing. Anna Palokha, učo 18083. Changed: 24/2/2020 14:50. -
KUŠNEROVÁ, Milena, Marta HARNIČÁROVÁ, Jan VALÍČEK, Zuzana PALKOVÁ, Zdenko TKÁČ, Anton PANDA, Ján KMEC and Ondrej LUKÁČ. Measurement of the Thermal Properties of Innovative Highly-Insulating Non-Structural Concretes. Defect and Diffusion Forum. Switzerland: TRANS TECH PUBLICATIONS, LTD, 2019, vol. 2019, No 390, p. 41-52. ISSN 1662-9507.
Name in Czech: Měření tepelných vlastností inovativních vysokoizolačních nekonstrukčních betonů
RIV/75081431:_____/19:00001409 Article in a journal. English. Switzerland.
Kušnerová, Milena (203 Czech Republic, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution) -- Panda, Anton (703 Slovakia) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Lukáč, Ondrej (703 Slovakia)
Keywords in English: automated calorimetric chamber; temperature measurements; highly-insulating concrete; heat capacity; heat conductivity
ERROR! Není vyplněn způsob publikování.
Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 2/4/2019 12:53. -
KOPAL, Ivan, Juliána VRŠKOVÁ, Darina ONDRUŠOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Zuzana KOLENIČOVÁ. Modeling the thermal decomposition of friction composite systems based on yarn reinforced polymer matrices using artificial neural networks. Material Iwiss. Weinheim: Verlag GmbH, 2019, vol. 50, No 5, p. 616-628. ISSN 0933-5137.URL
Name in Czech: Modelování tepelného rozkladu třecích kompozitních systémů na bázi polymerních matric vyztužených přízemi pomocí umělých neuronových sítí
RIV/75081431:_____/19:00001528 Article in a journal. English. Germany.
Kopal, Ivan (703 Slovakia, guarantor) -- Vršková, Juliána (703 Slovakia) -- Ondrušová, Darina (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Koleničová, Zuzana (703 Slovakia)
Keywords in English: Friction composites; thermal decomposition; thermogravimetry; artificial neural network modelling; polymers
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 15:42. -
KMEC, Ján, Marta HARNIČÁROVÁ, Cristina BORZAN, Marian BORZAN, Jan VALÍČEK, Jiří KŘÍŽ and Milena KUŠNEROVÁ. Proposal for a method of measurement and control of surface quality in the course of abrasive waterjet cutting of material. Online. In MODERN TECHNOLOGIES IN MANUFACTURING. Neuveden: E D P SCIENCES, 2019, p. 1-8. ISSN 2261-236X. Available from: https://dx.doi.org/10.1051/matecconf/201929902003.URL
Name in Czech: Návrh metody měření a kontroly kvality povrchu při řezání materiálu abrazivním vodním paprskem
RIV/75081431:_____/19:00001929 Proceedings paper. English. France.
Kmec, Ján (703 Slovakia, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Borzan, Cristina (642 Romania) -- Borzan, Marian (642 Romania) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
Keywords in English: AWJ automation; productivity and production optimization; topographic roughness function
Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/1/2021 11:51. -
KOPAL, Ivan, Marta HARNIČÁROVÁ, Jan VALÍČEK, Jan KRMELA and Ondrej LUKAC. Radial Basis Function Neural Network-Based Modeling of the Dynamic Thermo-Mechanical Response and Damping Behavior of Thermoplastic Elastomer Systems. Polymer Science. BASEL, SWITZERLAND: MDPI, 2019, vol. 11, No 6, p. nestránkováno, 20 pp. ISSN 2073-4360. Available from: https://dx.doi.org/10.3390/polym11061074.URL
Name in Czech: Modelování neurální sítě založené na principu radiální základny dynamické termomechanické odezvy a tlumení chování termoplastických elastomerních systémů
RIV/75081431:_____/19:00001555 Article in a journal. English. Switzerland.
Kopal, Ivan (703 Slovakia, guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Krmela, Jan (703 Slovakia) -- Lukac, Ondrej (703 Slovakia)
Keywords in English: "Author Keywords:artificial neural networks; radial basis functions; thermoplastic polyurethanes; visco-elastic properties; dynamic mechanical analysis ; KeyWords Plus:TRANSITION-TEMPERATURES; MECHANICAL-PROPERTIES; POLYURETHANE; PREDICTION; POLYMERS "
Changed by: Mgr. Milada Šanderová, učo 25742. Changed: 22/4/2020 14:19. -
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Ján KMEC, Zuzana PALKOVÁ, Ivan KOPAL, Ján KRMELA and Anton PANDA. Study of the influence of the structural grain size on the mechanical properties of technical materials. Material Iwiss. Weinheim: Verlag GmbH, 2019, vol. 50, No 5, p. nestránkováno, 11 pp. ISSN 0933-5137.URL
Name in Czech: Studium vlivu strukturní velikosti zrna na mechanické vlastnosti technických materiálů
RIV/75081431:_____/19:00001530 Article in a journal. English. Germany.
Harničárová, Marta (203 Czech Republic, guarantor, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution) -- Kopal, Ivan (703 Slovakia) -- Krmela, Ján (703 Slovakia) -- Panda, Anton (703 Slovakia)
Keywords in English: Nanomaterials; grain size; mechanical parameters; mathematical and physical modelling
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 15:36. -
KUŠNEROVÁ, Milena, Jan VALÍČEK, Marta HARNIČÁROVÁ, Ján KMEC, Michal ŘEPKA, Roman DANEL, Anton PANDA and Zuzana PALKOVÁ. The Combined Relative Uncertainty of Measurement Results by Prototype Semi-Automated Calorimetric Chamber. MEASUREMENT SCIENCE REVIEW. POLAND: DE GRUYTER POLAND, 2019, vol. 19, No 2, p. 53-60. ISSN 1335-8871. Available from: https://dx.doi.org/10.2478/msr-2019-0009.URL
Name in Czech: Kombinovaná relativní nejistota výsledků měření prototypovou poloautomatickou kalorimetrickou komorou
Name (in English): The Combined Relative Uncertainty of Measurement Results by Prototype Semi-Automated Calorimetric Chamber
RIV/75081431:_____/19:00001548 Article in a journal. English. Poland.
Kušnerová, Milena (203 Czech Republic, guarantor, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution) -- Danel, Roman (203 Czech Republic, belonging to the institution) -- Panda, Anton (703 Slovakia) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: "Combined relative uncertainty; step temperature measurement; specific thermal capacity; semi-automated calorimetric chamber "
Changed by: Mgr. Milada Šanderová, učo 25742. Changed: 22/4/2020 14:11. -
PANDA, Anton, Kostiantyn DYADYURA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Iveta PANDOVÁ and Zuzana PALKOVÁ. The conditions for obtaining self-organized structures on the tribological surfaces of composite materials based on polytetrafluoroethylene which is used in automotive and other demanding technologies. MM Science Journal. Czech Republic: MM publishing Ltd., 2019, vol. 2019, December, p. 3500-3508. ISSN 1803-1269. Available from: https://dx.doi.org/10.17973/MMSJ.2019_12_2019031.URL
Name in Czech: Podmínky pro získání samostatně organizovaných struktur na tribologických površích kompozitních materiálů na bázi polytetrafluorethylenu, který se používá v automobilových a jiných náročných technologiích
RIV/75081431:_____/19:00001694 Article in a journal. English. Czech Republic.
Panda, Anton (703 Slovakia, guarantor) -- Dyadyura, Kostiantyn (804 Ukraine) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Pandová, Iveta (703 Slovakia) -- Palková, Zuzana (703 Slovakia)
Keywords in English: Composite materiál; Physical and mechanical properties; Polytetrafluoroethylene; Principles of self-organization and nonequilibrium thermodynamics; Wear
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:25. -
KOSA, Patrik, Martin OLEJAR, Zuzana PALKOVÁ, Dušan HRUBÝ, Vladimír CVIKLOVIČ, Marta HARNIČÁROVÁ and Jan VALÍČEK. The effect of the number of inference rules of a fuzzy controller on the quality of control of a mobile robot. Online. In Balc, N; Leordean, D. Modern Technologies in Manufacturing. Neuveden: E D P SCIENCES, 2019, p. 1-6. ISSN 2261-236X. Available from: https://dx.doi.org/10.1051/matecconf/201929905002.URL
Name in Czech: Vliv počtu odvozovacích pravidel fuzzy řadiče na kvalitu řízení mobilního robota
RIV/75081431:_____/19:00001935 Proceedings paper. English. France.
Kosa, Patrik (703 Slovakia, guarantor) -- Olejar, Martin (703 Slovakia) -- Palková, Zuzana (703 Slovakia, belonging to the institution) -- Hrubý, Dušan (703 Slovakia) -- Cviklovič, Vladimír (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
Keywords in English: fuzzy controller; control; mobile robot
Type of proceedings: post-proceedings
Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 4/2/2021 09:14. -
PANDA, Anton, Kostiantyn DYADYURA, Petro P. SAVCHUK, Vitalii KASHYTSKYI, Viktoria MALETS, Jan VALÍČEK, Marta HARNIČÁROVÁ, Iveta PANDOVÁ, Lukáš ANDROVIČ and Milena KUŠNEROVÁ. The results of theoretical and experimental studies of tribotechnical purposes composites on the basis of epoxy composite material. MM Science Journal. Czech Republic: MM publishing Ltd., 2019, vol. 2019, December, p. 3509-3518. ISSN 1803-1269. Available from: https://dx.doi.org/10.17973/MMSJ.2019_12_2019032.URL
Name in Czech: Výsledky teoretických a experimentálních studií tribotechnických kompozitů na bázi epoxidového kompozitního materiálu
RIV/75081431:_____/19:00001695 Article in a journal. English. Czech Republic.
Panda, Anton (703 Slovakia, guarantor) -- Dyadyura, Kostiantyn (804 Ukraine) -- Savchuk, Petro P. (804 Ukraine) -- Kashytskyi, Vitalii (804 Ukraine) -- Malets, Viktoria (804 Ukraine) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Pandová, Iveta (703 Slovakia) -- Androvič, Lukáš (703 Slovakia) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
Keywords in English: Adhesion; Mechanical properties; Molding; Polymer composites; Thermal vacuum technology
Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:26. -
KUŠNEROVÁ, Milena, Michal ŘEPKA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Roman DANEL, Ján KMEC and Zuzana PALKOVÁ. A New Method of Semi-automated Measurement of Shear Friction Coefficient. TEM Journal. Serbia: UIKTEN - Association for Information Communication Technology Education and Science., 2018, vol. 7, No 4, p. 924-932. ISSN 2217-8309.URL
Name in Czech: Nová metoda poloautomatizovaného měření koeficientu tření ve smyku
RIV/75081431:_____/18:00002035 Article in a journal. English. Serbia.
Kušnerová, Milena (703 Slovakia, guarantor, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (703 Slovakia, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Danel, Roman (203 Czech Republic, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
Keywords in English: Shear friction coefficient; intelligent drive
Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 28/4/2022 07:42. -
KOPAL, Ivan, Marta HARNIČÁROVÁ, Jan VALÍČEK, Pavel KOŠTIAL and Zora JANČÍKOVÁ. Determination of activation energy of relaxation events in thermoplastic polyurethane by dynamic mechanical analysis. Material Iwiss. Weinheim: Verlag GmbH, 2018, Neuveden, No 48, p. 627-634. ISSN 0933-5137.
Name in Czech: Stanovení aktivační energie relaxačních přechodů v termoplastickém polyuretanu dynamickou mechanickou analýzou
RIV/75081431:_____/18:00001259 Article in a journal. English. Germany.
Kopal, Ivan (203 Czech Republic, guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Koštial, Pavel (703 Slovakia) -- Jančíková, Zora (203 Czech Republic)
Keywords in English: "Thermoplastic polyurethane; relaxation transitions; activation energy; dynamic mechanical analysis
Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 3/7/2018 08:55. -
MITAĽOVÁ, Zuzana, Dušan MITAĽ, František BOTKO, Juliána LITECKÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Miloš OHLÍDAL. INFLUENCE OF FACTORS ON SURFACE TOPOGRAPHY OF WOOD-BASED COMPOSITE MATERIAL. ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING. Rumunsko: Editura Politehnica, 2018, vol. 16, No 4, p. 110-114. ISSN 1583-7904.
Name in Czech: VLIV FAKTORŮ NA POVRCHOVOU TOPOGRAFII KOMPOZITNÍHO MATERIÁLU NA DŘEVĚ \ t
RIV/75081431:_____/18:00001527 Article in a journal. English. Romania.
Mitaľová, Zuzana (703 Slovakia, guarantor) -- Mitaľ, Dušan (703 Slovakia) -- Botko, František (703 Slovakia) -- Litecká, Juliána (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Ohlídal, Miloš (203 Czech Republic)
Keywords in English: surface roughness; 3D optical profilometer; composite material with natural reinforcement
Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 22/4/2020 14:31. -
Prediction of the Tensile Response of Carbon Black Filled Rubber Blends by Artificial Neural NetworkKOPAL, Ivan, Ivan LABAJ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Dušan HRUBÝ. Prediction of the Tensile Response of Carbon Black Filled Rubber Blends by Artificial Neural Network. Polymers. Switzerland: MDPI, 2018, vol. 10, No 6, p. 1 - 18. ISSN 2073-4360.
Name in Czech: Predikce napěťově-deformační odezvy gumárnaských směsí s různým obsahem sazí na mechanické namáhání tahem pomocí umělých neuronových sítí.
RIV/75081431:_____/18:00001260 Article in a journal. English. Switzerland.
Kopal, Ivan (703 Slovakia, guarantor) -- Labaj, Ivan (203 Czech Republic) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Hrubý, Dušan (203 Czech Republic)
Keywords in English: carbon black filled rubber blends; mechanical properties and characteristics; tensile tests of polymers; stress-strain curves; artificial neural network
Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 3/7/2018 09:45. -
KOPAL, Ivan, Juliana VRŠKOVÁ, Ivan LABAJ, Darina ONDRUŠOVÁ, Peter HYBLER, Marta HARNIČÁROVÁ, Jan VALÍČEK and Milena KUŠNEROVÁ. The Effect of Hihg-Energy Ionizing Radiation on the Mechanical Properties of a Melamine Resin, Phenol-FormaldehydeResin, and Nitrile Rubber Blend. Materials. Basel, Switzerland: MDPI AG, 2018, 11/2018, No 12, p. nestránkováno, 13 pp. ISSN 1996-1944.
Name in Czech: Vliv ionizujícího záření s vysokou energií na mechanické vlastnosti melaminové pryskyřice, fenol-formaldehydové pryskyřice a směsi nitrilového kaučuku
RIV/75081431:_____/18:00001355 Article in a journal. English. Switzerland.
Kopal, Ivan (703 Slovakia, guarantor) -- Vršková, Juliana (703 Slovakia) -- Labaj, Ivan (703 Slovakia) -- Ondrušová, Darina (703 Slovakia) -- Hybler, Peter (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
Keywords in English: high-energy ionizing radiation; mechanical properties; polymer blends; polymer friction composite systems; polymer modification
Changed by: Mgr. Eva Hynešová, učo 23116. Changed: 18/12/2018 11:33. -
PANDOVÁ, Iveta, Anton PANDA, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ and Zuzana PALKOVÁ. "Use of Sorption of Copper Cations by Clinoptilolite for Wastewater Treatment ". International Journal of Environmental Research and Public Health. Switzerland: MDPI, 2018, vol. 15, No 7, p. 1-12, 13 pp. ISSN 1660-4601.
Name in Czech: Použití sorpce mědi kationtů klinoptilolitem pro úpravu odpadních vod
Name (in English): "Use of Sorption of Copper Cations by Clinoptilolite for Wastewater Treatment "
RIV/75081431:_____/18:00001273 Article in a journal. English. Switzerland.
Pandová, Iveta (203 Czech Republic, guarantor) -- Panda, Anton (203 Czech Republic) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (203 Czech Republic)
Keywords in English: wastewater; environment; copper cations; sorption; zeolites
Changed by: Mgr. Eva Hynešová, učo 23116. Changed: 14/8/2018 10:49.
2024
2023
2022
2021
2020
2019
2018
Displayed: 22/11/2024 09:29