AN_SMT Engineering Materials for Economicsts

Vysoká škola technická a ekonomická v Českých Budějovicích
zima 2026
Rozsah
2/2/0. 5 kr. Ukončení: zk.
Vyučující
doc. Ing. Karel Gryc, MBA, Ph.D. (cvičící)
Ing. Kamil Koza (cvičící)
Garance
doc. Ing. Karel Gryc, MBA, Ph.D.
Ústav technicko-technologický – Rektor – Vysoká škola technická a ekonomická v Českých Budějovicích
Dodavatelské pracoviště: Ústav technicko-technologický – Rektor – Vysoká škola technická a ekonomická v Českých Budějovicích
Rozvrh seminárních/paralelních skupin
AN_SMT/P01: Út 13:05–14:35 D617, K. Gryc, K. Koza
AN_SMT/S01: Út 18:10–19:40 D617, K. Gryc, K. Koza
Omezení zápisu do předmětu
Předmět je otevřen studentům libovolného oboru.
Cíle předmětu opírající se o výstupy z učení
The aim of the course is to acquaint students with the principles of conventional and progressive metal materials used in engineering practice. Graduates are able to orientate in basic contours in key metal materials, fundamentals of physico-chemical processes, crystalline structure and lattice defects, methods of microscopic structure analysis, mechanical tests carried out in accordance with relevant standards. The graduate is able to critically evaluate individual types of materials, to classify and evaluate information contained in protocols from measurement of basic material properties. The graduate is able to analyze basic types of binary equilibrium diagrams. The graduate is able to orientate in the range of corrosion and corrosion protection of metals. The graduate will acquire basic knowledge and skills in the field of metallic materials, which will enable him to effectively manage production processes in the company, where these materials are used within the material flow, products or goods.
Výstupy z učení
Po úspěšném absolvování předmětu student: 18.1 umí definovat základní rozdělení kovových materiálů a dále charakterizovat jejich strukturní, mechanické a užitné vlastnosti 18.2 umí definovat vnitřní stavbu hmoty, krystalovou stavbu kovů, bodové, čárové, plošné a prostorové poruchy krystalové mřížky 18.3 má základní znalosti v oblasti termodynamiky, kinetiky a difúze kovových soustav 18.4 má základní znalosti z oblasti tuhnutí a krystalizace kovů a slitin, segregačních jevů a fázových přeměn v tuhém stavu 18.5 má základní znalosti z oblasti metalografie a mechanických zkoušek kovů a jejich slitin 18.6 má základní znalosti z oblasti koroze a protikorozní ochrany kovů 18.7 dovede realizovat základní rozbor binárních rovnovážných diagramů slitin železa i neželezných kovů 18.8 dovede aplikovat metalografické metody a mechanické zkoušky kovů v souladu s příslušnými normami 18.9 umí základním způsobem kriticky hodnotit jednotlivé typy kovových materiálů vzhledem k jejich vlastnostem a vhodným aplikacím v technické praxi
Osnova
Lectures: 1. Introduction to materials, basic classification and their use in engineering practice. (18.1, 18.8) ♻ (The influence of the life cycle of materials on their properties - degradation and aging of metals in practice.) 2. Matter, its internal structure, crystal structure of metals, point, line, area and spatial defects of the crystal lattice. (18.2, 18.7) ♻ (The importance of the structure of a material on its sustainability from the point of view of durability and recyclability.) 3. Fundamentals of thermodynamics, kinetics and diffusion of metal systems. (18.3) ♻ (The importance of precise knowledge of thermodynamic and kinetic laws for energy savings.) 4. Phase transformations in metals. Basic types of binary systems. The connection of binary diagrams with the properties of alloys. (18.4, 18.7, 18.8) ♻ (Stability and durability of materials - how do binary diagrams affect the long-term properties of metals?) 5. Solidification and crystallization of metals and alloys, segregation phenomena. Phase transformations in the solid state. (18.4, 18.8) ♻ (Controlled crystallization and segregation control - improving the quality and sustainability of metallic materials.) 6. Metallography. Light microscopy, macrostructure, purity of metals, grain size. (18.5, 18.8, 18.8) ♻ (Metallography - early identification of incorrect structure or purity of alloys.) 7. Mechanical properties of metals and their alloys: influence of microstructure on mechanical properties, types of deformation. (18.5, 18.8) ♻ (Mechanical properties – limits and opportunities for the scope of use of recycled materials) 8. Testing of mechanical properties of metals and their alloys. Static, hardness and impact tests in bending. (18.5, 18.8) ♻ (Mechanical properties – optimization of the scope of energy-intensive processing) 9. Iron-steel alloys. Their characteristics, properties and uses. (18.7, 18.8) ♻ (Steel service life – factors affecting the degradation of materials in long-term use.) 10. Iron-cast alloys. Their characteristics, properties and uses. (18.5, 18.7, 18.8) ♻ (Wear and fatigue properties of cast irons - how to choose the right materials for long-term applications?) 11. Brief characteristics of selected non-ferrous metal alloys and their uses, part 1. (18.5, 18.7, 18.8) ♻ (Resistance of aluminum and copper alloys to corrosion and mechanical degradation.) 12. Brief characteristics of selected non-ferrous metal alloys and their uses, part 2. (18.5, 18.7, 18.9) ♻ (Stability of titanium and nickel in extreme conditions - advantages of sustainable materials with long service life.) 13. Corrosion of metals. Types of corrosion and consequences. Active and passive corrosion protection of metals. (18.6, 18.8) ♻ (Ecological alternatives for corrosion protection – elimination of toxic inhibitors and their impacts on material properties.) Seminars: 1. Introductory information. Safety regulations, methods of working in laboratory conditions. (18.1 - 18.8) ♻ (How does material degradation affect their safety and operational reliability?) 2. Excursion to materials laboratories and testing facilities of VŠTE's industrial partners. (18.5, 18.8) 3. Basic calculations in the field of thermodynamics of metals and alloys. (18.3) 4. Basic binary equilibrium diagrams. (18.7) ♻ (Relationship between binary diagrams and the stability of materials during long-term use.) 5. Light microscopy and optical emission spectrometry. (18.5, 18.8) ♻ (Identification of material composition enables effective recycling.) 6. Light microscopy: practical exercises. (18.5, 18.8) ♻ (Monitoring the quality of recycled materials and raw materials.) 7. Optical emission spectrometry: practical exercises. (18.5, 18.8) ♻ (Comparison of the microstructure of primary and recycled materials - influence on properties.) 8. Tensile and impact tests in bending. (18.5, 18.8) ♻ (Comparison of the mechanical properties of recycled and primary materials.) 9. Tensile test: practical exercises. (18.5, 18.8) ♻ (Testing sustainable materials.) 10. Impact test in bending: practical exercises. (18.5, 18.8) ♻ (Influence of material composition on long-term fatigue of a material.) 11. Binary diagrams of iron alloys. (18.4, 18.7, 18.8) ♻ (The influence of phase transformations on the service life of materials and their resistance.) 12. Selected binary diagrams of non-ferrous metals. (18.4, 18.7, 18.8) ♻ (Recycling of selected alloys and its influence on material properties.) 13. Final test, evaluation of semester work. (18.1 - 18.8)
Literatura
    povinná literatura
  • SKÁLOVÁ, J., KOVAŘÍK, R., BENEDIKT, V. Základní zkoušky kovových materiálů. 4. vyd. - dotisk. Plzeň: Západočeská univerzita, 2010. 175 s. ISBN 978-80-7043-417-8.
  • ASKELAND, D., R. FULAY, P. P. WRIGHT a J. WENDELIN, 2010. The Science and Engineering of Materials. 6. vyd. Stamford: Cengage Learning. ISBN 978-0-495-29602-7.
  • SKÁLOVÁ, J., J. KOUTSKÝ a V. MOTYČKA, 2010. Nauka o materiálech. 4. vyd. Plzeň: Západočeská univerzita. ISBN 978-80-7043-874-9.
  • MACHEK, V. a J. SODOMKA, 2008. [Nauka o materiálu. 3. část], Speciální kovové materiály. Praha: České vysoké učení technické. ISBN 978-80-01-04212-0.vvv
  • SILBERNAGEL, A., V. HRUBÝ, M. GREGER a J. NĚMEC 2011. Struktura, vlastnosti, zkoušení a použití kovů. Ostrava: Kovosil. ISBN 978-80-903694-6-7.
    doporučená literatura
  • SKRBEK, B., 2010. Výběr materiálových norem: pracovní pomůcka. Liberec: Technická univerzita v Liberci. ISBN 978-80-7372-634-8. PILOUS, V., 2008. Technologie kovových materiálů. 2. vyd. Plzeň: Západočeská univerzita. ISBN 978-80-7043-699-8.
  • MACHEK, V. a J. SODOMKA, 2007. [Nauka o materiálu]. 2. část, Vlastnosti kovových materiálů. Praha: Nakladatelství ČVUT. ISBN 978-80-01-03686-0.
  • KADLEC, J. a M. POSPÍCHAL, 2010. Nauka o materiálu I. Brno: Univerzita obrany. ISBN 978-80-7231-705-9.
  • ASHBY, M., F. a D. R. H. JONES, 2012. Engineering Materials 1, An Introduction to Properties, Applications and Design. 4. vyd. Oxford: Elsevier. ISBN 978-0-0080-96665-6.
Organizační formy výuky
přednáška
seminář
cvičení
odborná praxe
tutoriál
konzultace
Komplexní výukové metody
frontální výuka
skupinová výuka - kooperace
projektová výuka
brainstorming
kritické myšlení
samostatná práce – individuální nebo individualizovaná činnost
výuka podporovaná multimediálními technologiemi
Studijní zátěž
AktivitaPočet hodin za semestr
Prezenční formaKombinovaná forma
Projekt - semestrální26 
Příprava na přednášky16 
Příprava na seminář, cvičení, tutoriál16 
Příprava na závěrečný test20 
Účast na přednáškách26 
Účast na semináři/cvičeních/tutoriálu/exkurzi26 
Celkem:1300
Metody hodnocení a jejich poměr
test - závěrečný 70%
projekt - semestrální 30%
Podmínky testu
For successful completion of the course it is necessary to achieve at least 70% of the total and final evaluation under the conditions set out below. In the interim evaluation it is possible to get 30 points, ie 30%. In the final evaluation you can get a total of 70 points, ie 70%. Overall classification of the course, ie points for final evaluation (70 - 0) + points from continuous evaluation (30 - 0): A 100 - 90, B 89.99 - 84, C 83.99 - 77, D 76.99 - 73, E 72.99-70, FX 69.99-30, F 29.99-0. Full-time students are obliged to fulfill the compulsory 70% attendance at contact instruction, ie everything except lectures. If the attendance is not fulfilled, the student will be automatically classified as “-”.
Odkaz a informace učitele
Participation in all forms of education is solved by a separate internal standard of VŠTE (Evidence of students' attendance at VŠTE). 70% attendance is obligatory for full-time students.
Předmět je zařazen také v obdobích zima 2025.
  • Statistika zápisu (nejnovější)
  • Permalink: https://is.vstecb.cz/predmet/vste/zima2026/AN_SMT