2025
THE ISSUE OF DETERMINING THE LOCKING FORCE OF A HPDC MACHINE
SOBRINO, DAYNIER ROLANDO DELGADO; Ján MAJERNÍK; DANIEL KUCERKA; Michaela MAJERNÍKOVÁ; PETER KOSTAL et al.Základní údaje
Originální název
THE ISSUE OF DETERMINING THE LOCKING FORCE OF A HPDC MACHINE
Autoři
SOBRINO, DAYNIER ROLANDO DELGADO; Ján MAJERNÍK; DANIEL KUCERKA; Michaela MAJERNÍKOVÁ; PETER KOSTAL a Martin PODAŘIL
Vydání
MM SCIENCE JOURNAL, 2025, 1803-1269
Další údaje
Jazyk
angličtina
Typ výsledku
Článek v odborném periodiku
Obor
20301 Mechanical engineering
Stát vydavatele
Česká republika
Utajení
není předmětem státního či obchodního tajemství
Odkazy
Impakt faktor
Impact factor: 0.500 v roce 2024
Označené pro přenos do RIV
Ano
Kód RIV
RIV/75081431:_____/25:00002925
Organizační jednotka
Vysoká škola technická a ekonomická v Českých Budějovicích
UT WoS
Klíčová slova anglicky
HPDC; Locking Force; Moment of Forces; Twisting couple; Gas Entrapment
Štítky
Změněno: 11. 11. 2025 10:13, Ing. Barbora Langšádlová
Anotace
V originále
In the high-pressure die casting machines, the locking force is a parameter that determines the size of the machine. For the safe operation of the machines, it is necessary that the die is locked perfectly, which ensures compliance with the dimensional tolerances of the cast and prevents metal from spraying out of the parting plane. The submitted contribution is devoted to the issue determining the adequate locking force of the machine and describes the recommended methodology for determining its size and the resulting area of application. Based on the dimensions of the gating system, the dimensions of the die frame cavity insert are calculated. By determining the center of the cavity insert and the center of the gating system, the position of the carriers of the opening and locking force are determined. In order to unify the carriers of the opening and locking force, the gating system is modified. It is proven that the unification of the centers eliminates the momentary rotating effect of forces not lying on one carrier, and at the same time, the modification of the gating system contributed to the reduction of the gas entrapment in the volume of the high pressure die cast.