D 2022

COMBINATION OF SURFACE AND VOLUME ANALYSIS METHODS IN THE STUDY OF THE QUALITY OF THIN-WALLED CASTINGS FROM ZP0410 ALLOY

GRYC, Karel; Ladislav SOCHA; Roman KUBEŠ; Václav SOCHACKÝ; Kamil KOZA et al.

Basic information

Original name

COMBINATION OF SURFACE AND VOLUME ANALYSIS METHODS IN THE STUDY OF THE QUALITY OF THIN-WALLED CASTINGS FROM ZP0410 ALLOY

Authors

GRYC, Karel; Ladislav SOCHA; Roman KUBEŠ; Václav SOCHACKÝ; Kamil KOZA; Jaromír TROBL and Martin PINTA

Edition

Ostrava, Czech Republic, EU, METAL 2022 Conference Proceedings, p. 708-713, 884 pp. 2022

Publisher

Tanger Ltd.

Other information

Language

English

Type of outcome

Proceedings paper

Field of Study

20501 Materials engineering

Country of publisher

Czech Republic

Confidentiality degree

is not subject to a state or trade secret

Publication form

electronic version available online

References:

Marked to be transferred to RIV

Yes

RIV identification code

RIV/75081431:_____/22:00002835

Organization unit

Institute of Technology and Business in České Budějovice

ISSN

Keywords in English

Zinc alloys; melting; casting; recycling; returnable material

Tags

Links

TH04020055, research and development project.
Changed: 10/4/2025 10:31, Ing. Barbora Langšádlová

Abstract

In the original language

The technology of high-pressure die casting thin-walled castings requires increased demands on the stability of technological processes and pressure casting parameters. The wall thickness of the studied zinc alloy castings (ZP0410) ranges from 0.4 to 1.2 mm. In general, it is necessary to use higher mould operating temperatures and a higher casting speed when filling the mould cavity when casting thin-walled castings. There is an increased load on the mould (tool) and the die casting machine during this casting process and the use of more demanding parameters. It results in a shortening of mould service life. There is currently no own returnable material (alloy ZP0410) used in the given production conditions in the production of thin-walled castings. Only the primary alloy ZL0410 is used now. It must be emphasized that the ability to implement the recycling of these returnable materials is becoming increasingly important. However, it is necessary to ensure that the quality of production is not reduced. The research was carried out aimed at determining the current state. Methods of roughness analysis, computed tomography, and metallography of casting defects from casting machine failures even after plating are used in the study of existing production technology in addition to standard long-term monitoring of melt quality. The findings of these research activities were briefly summarized in the paper. The experimental development of the technology of using our own returnable material in this quality-intensive production is in progress now.

Files attached

COMBINATION_OF_SURFACE_AND_VOLUME_ANALYSIS_METHODS_IN_THE_STUDY_OF_THE_QUALITY_OF_THIN-WALLED_CASTINGS_FROM_ZP0410_ALLOY.pdf
Request the author's version of the file