2023
The Piston Velocity Impact on the Filling Chamber Wave Formation of High Pressure Die Casting Machine in 1st Phase of Casting Cycle
MAJERNÍK, Ján and Martin PODAŘILBasic information
Original name
The Piston Velocity Impact on the Filling Chamber Wave Formation of High Pressure Die Casting Machine in 1st Phase of Casting Cycle
Name in Czech
Vliv rychlosti pístu na tvorbu vln v plnicí komoře vysokotlakého licího stroje v 1. fázi licího cyklu
Authors
MAJERNÍK, Ján and Martin PODAŘIL
Edition
International journal of advanced manufacturing technology, London, Springer, 2023, 0268-3768
Other information
Language
English
Type of outcome
Article in a journal
Field of Study
20300 2.3 Mechanical engineering
Country of publisher
United Kingdom of Great Britain and Northern Ireland
Confidentiality degree
is not subject to a state or trade secret
References:
Impact factor
Impact factor: 2.900
Marked to be transferred to RIV
Yes
RIV identification code
RIV/75081431:_____/23:00002588
Organization unit
Institute of Technology and Business in České Budějovice
EID Scopus
Keywords (in Czech)
Plnění komory; zachycení plynu; HPDC; rychlost pístu; pórovitost
Keywords in English
Chamber Filling; Gas Entrapment; HPDC; Piston velocity; Porosity
Tags
Reviewed
Changed: 6/10/2023 10:56, Barbora Kroupová
In the original language
The quality properties of high pressure die casts are closely correlated with porosity. The formation of porosity is primarily initiated by entrapment of air and gases in the volume of the melt, during its transition through the gating system. This entrapment can occur as a result of an incorrect design of the gating system, incorrect setting of the casting technological parameters, or sometimes a combination of both causes. The setting of the piston velocity in the first and second phase of the casting cycle has the highest proportion of the gas entrapment of all the technological parameters. The submitted article is describing the influence of piston velocity in the first phase of the casting cycle. Velocities are investigated in range from 0.1 m.s-1 to 1.3 m.s-1. First of all, the development of the wave arising at different piston velocities is assessed and the gas entrapment in the melt volume is investigated. Subsequently, the proportion of the gas entrapment in the cast volume at the end of the filling phase is investigated depending on the variable value of the piston velocity in the first phase. In the end, the determination of the piston velocity impact in the first phase on the completion nature of the filling chamber of the machine is derived.
In Czech
Kvalitativní vlastnosti vysokotlakých tlakových odlitků úzce souvisejí s pórovitostí. Vznik pórovitosti je iniciován především zachycením vzduchu a plynů v objemu taveniny při jejím průchodu vtokovým systémem. K tomuto zachycení může dojít v důsledku nesprávné konstrukce vtokového systému, nesprávného nastavení technologických parametrů odlévání nebo někdy kombinací obou příčin. Nastavení rychlosti pístu v první a druhé fázi licího cyklu má ze všech technologických parametrů nejvyšší podíl na zachycení plynu. Předkládaný článek popisuje vliv rychlosti pístu v první fázi licího cyklu. Rychlosti jsou zkoumány v rozsahu od 0,1 m.s-1 do 1,3 m.s-1. Především je posuzován vývoj vlny vznikající při různých rychlostech pístu a zkoumáno zachycení plynu v objemu taveniny. Následně se zkoumá podíl zachycení plynu v objemu odlitku na konci fáze plnění v závislosti na proměnné hodnotě rychlosti pístu v první fázi. Nakonec je odvozeno určení vlivu rychlosti pístu v první fázi na charakter plnění plnicí komory stroje.