CMS_1 Machine Parts and Mechanisms I.

Institute of Technology and Business in České Budějovice
summer 2021
Extent and Intensity
1/2/0. 4 credit(s). Type of Completion: zk (examination).
Guaranteed by
Ing. Jaroslav Staněk, DiS.
Study Department – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: The Department of Mechanical Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Prerequisites (in Czech)
OBOR(CAP)
Course Enrolment Limitations
The course is offered to students of any study field.
Course objectives supported by learning outcomes
Subject digestedly acquaints with problems of construction, proposal and solidity verification of connections mechanical components. Graduate will be able these communications in practice separately arithmetically solve and design their option of catalogue or to construct in terms of disposition production, with the aid of technical norms and catalogues specialized producers.
Syllabus
  • 1. Introduction to problems of connections in machine – conditions of functionality (volubility), technical solving principles (formative / tonic / material flow), common base of solidity proposal and verification (inner effects, contact carrying - capacity, time flow influence of load, serration effects of wiring on bearing construction)
  • 2. Spiral and thread wiring – constructional ordering, proposal and verification, assembly conditions
  • 3. Highly initial tension screwed joint – proposal and verification, problems credibility gap during dynamic loading
  • 4.Pinned, riveted joint and pivotal wiring – constructional form, proposal and verification
  • 5. Formative wiring of shafting with bullet – by the help of nibs, laps and castellation (constructional form, proposal and verification)
  • 6. Strength wiring of shafting with bullet – forced on and clam bunk (constructional ordering, proposal and verification)
  • 7. Elastic wiring – purpose, sorts and structural design springs, reservation carrying - capacity and required deformation characteristics
  • 8. Material wiring – weld metal, soldered, bonded (operational and technological characteristics, basic fort solving)
  • 9. Components susceptible movement – introduction to problems cyclic loading, durability components and tribologie
  • 10. Shafting – common constructive and technological solving with reference to functionality and durability, dimensioning and verification on fatigue, problems stiffness (critical speed); spindle packing
  • 11. Sliding bearing – possibilities of material solving, characteristics and pertinence of using, basic functional and strenght calculation, proposal from catalogue of specialty producer
  • 12. Rolling bearing – basic sorts accordance with constructional solving, characteristics and using pertinence, basic functional calculation, proposal from catalogue of specialized producer
  • 13. Spindle clutch and brakes – basic sorts accordance with constructional solving, characteristics and using pertinence, basic functional calculation, proposal of catalogue specialized producer.
Literature
    required literature
  • ŘEŘÁBEK, A. Stavba a provoz strojů. Strojní součásti I. 1. vyd. Praha: Nakladatelství Scientia, 2006. 214 s. ISBN 80-86960-02-1.
  • ŘEŘÁBEK, A. Stavba a provoz strojů. Strojní součásti II. 1. vyd. Praha: Nakladatelství Scientia, 2009. 256 s. ISBN 978-80-86960-21-0
  • LEINVEBER, J., VÁVRA P. Strojnické tabulky. Úvaly: Albra, 2011. 928 s. ISBN: 978-80-7361-081-4.
    recommended literature
  • HRUBÝ, Petr, Zdeněk HLAVÁČ and Pavla ŽIDKOVÁ. Physical and mathematical models of shafts in drives with Hook´s joints. In Michael McGreevy, Robert Rita. Proceedings of the 5th biannual CER Comparative European Research Conference : International scientific conference for Ph.D. students of EU countries. London: Sciemcee Publishing, 2016, p. 136-140. ISBN 978-0-9928772-9-3. info
  • HRUBÝ, Petr, Zdeněk HLAVÁČ and Pavla ŽIDKOVÁ. Aplikace metody konečných prvků při stanovení modálních a spektrálních vlastností ohybových kmitů kloubového hřídele (Finite element method in the determination of modal and spectral properties of bending vibrations propshaft). In MMK 2015 : sborník příspěvků. 1. vyd. Hradec Králové: Magnanimitas, 2015, p. 2555-2564, 12 pp. ISBN 978-80-87952-12-2. info
  • HRUBÝ, Petr, Zdeněk HLAVÁČ and Pavla ŽIDKOVÁ. Metoda přenosových matic v aplikaci na řešení otáčkových rezonancí jednorozměrného lineárního kontinua (The method of transfer matrices in the solution of speed's resonance). In MMK 2015 : sborník příspěvků. 1. vyd. Hradec Králové: Magnanimitas, 2015, p. 2575-2582. ISBN 978-80-87952-12-2. info
  • ŘASA, J. Strojnické tabulky I. pro školu a praxi. Praha: Scientia, 2004. 754 s. ISBN: 80-7183-312-6.
  • ŘASA, J. Strojnické tabulky II. pro školu a praxi. Praha: Scientia, 2007. 588 s. ISBN:80-86960-20-3.
  • SHIGLEY, J. E., MISCHKE, Ch. R., BUDYNAS, R. G. Konstruování strojních součástí. 1. vyd. Brno: Vutium, 2010. 1159 s. ISBN 978-80-214-2629-0.
  • HRUBÝ, Petr and Pavla ŽIDKOVÁ. Calculation methods of parametrs of dynamic models of shafts in drives with hooke's joints. In Michael McGreevy, Robert Rita. CER Comparative European Research 2017. London: Sciemcee Publishing, 2017, p. 87-90. ISBN 978-0-9935191-4-7. info
  • HRUBÝ, Petr and Pavla ŽIDKOVÁ. Dynamic stress-strain analysis of shafts in drives with Hookes's joints. In Michael McGreevy, Robert Rita. CER Comparative European Research 2017. London: Sciemcee Publishing, 2017, p. 83-86. ISBN 978-0-9935191-4-7. info
  • HRUBÝ, Petr and Pavla ŽIDKOVÁ. Speed resonances of coupled shafts in drives with Hooke's joints. In Michael McGreevy, Robert Rita. CER Comparative European Research 2017. London: Sciemcee Publishing, 2017, p. 79-82. ISBN 978-0-9935191-4-7. info
Forms of Teaching
Lecture
Seminar
Teaching Methods
Frontal Teaching
Group Teaching - Competition
Individual Work– Individual or Individualized Activity
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial13 
Preparation for the Final Test13 
Seminární práce (in Czech)26 
Attendance on Lectures13 
Attendance on Seminars/Exercises/Tutorial/Excursion26 
Total:1040
Assessment Methods and Assesment Rate
Test – final 70 %
Seminary Work 30 %
Exam conditions
Grading of the course: Seminar Work: maximum 30% (0-30 points) Final Test: maximum 70% (0-70 points) Successful graduates of the course have to get totally at least 70 points.
Language of instruction
Czech
The course is also listed under the following terms winter 2012, summer 2013, winter 2013, summer 2014, winter 2014, summer 2015, winter 2015, winter 2016, winter 2017, winter 2018, winter 2019, winter 2020, winter 2021, winter 2022, winter 2023, winter 2024.
  • Enrolment Statistics (summer 2021, recent)
  • Permalink: https://is.vstecb.cz/course/vste/summer2021/CMS_1