PRS_2 Project II CE
Institute of Technology and Business in České Budějovicesummer 2021
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (seminar tutor)
- Guaranteed by
- Ing. Josef Musílek, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/S01: Fri 9:40–11:10 A3, Fri 11:25–12:10 A3, B. Pelánková
- Prerequisites
- FORMA(P) && PRS_1 PRS_1
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
The capacity limit for the course is 45 student(s).
Current registration and enrolment status: enrolled: 0/45, only registered: 0/45 - fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Learning outcomes
- The student will be able to compose the documentation for entering and building construction (DPS) according to Annex No. 6 of Decree No. 499/2006 Coll., on construction documentation, as amended in the Decree No. 62/2013 Coll. according to the teacher's instructions.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Lecture
Seminar
Exercise
Excursion - language
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Group Teaching - Cooperation
Group Teaching - Collaboration
Project Teaching
Brainstorming
Critical Thinking
Individual Work– Individual or Individualized Activity
Teaching Supported by Multimedia Technologies
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 22 45 Preparation for the Final Test 23 19 project 20 30 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
- Teacher's information
- Attendance in lessons is defined in a separate internal standard of ITB (Evidence of attendance of students at ITB). It is compulsory, except of the lectures, for full-time students to attend 70 % lesson of the subjet in a semester.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicesummer 2020
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (seminar tutor)
- Guaranteed by
- Ing. Jan Šlechta, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/S01: Mon 11:25–12:55 A4, Mon 13:05–13:50 A4, B. Pelánková
- Prerequisites
- PRS_1 PRS_1 &&FORMA(P)
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Learning outcomes
- The student will be able to compose the documentation for entering and building construction (DPS) according to Annex No. 6 of Decree No. 499/2006 Coll., on construction documentation, as amended in the Decree No. 62/2013 Coll. according to the teacher's instructions.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
- Teacher's information
- Attendance will not be tracked.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2019
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (lecturer)
- Guaranteed by
- Ing. Lukáš Polanecký
Lifelong learning Centre – Directorate of Study Administration and Lifelong Learning – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/CCV: Sat 26. 10. 11:25–14:35 D415, Sun 10. 11. 14:50–18:00 B4, Sat 7. 12. 11:25–12:55 B4, B. Pelánková
- Prerequisites
- OBOR(CAP)
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Learning outcomes
- The student will be able to compose the documentation for entering and building construction (DPS) according to Annex No. 6 of Decree No. 499/2006 Coll., on construction documentation, as amended in the Decree No. 62/2013 Coll. according to the teacher's instructions.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicesummer 2019
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (seminar tutor)
- Guaranteed by
- Ing. Josef Musílek, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/S01: Mon 10:25–11:10 B4, Mon 11:25–12:55 B4, B. Pelánková
PRS_2/S02: Mon 8:00–9:30 B4, Mon 9:40–10:25 B4, B. Pelánková
PRS_2/S03: Mon 13:50–14:35 B4, Mon 14:50–16:20 B4, B. Pelánková - Prerequisites
- FORMA(P) && PRS_1 PRS_1
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
The capacity limit for the course is 45 student(s).
Current registration and enrolment status: enrolled: 0/45, only registered: 0/45 - fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Learning outcomes
- The student will be able to compose the documentation for entering and building construction (DPS) according to Annex No. 6 of Decree No. 499/2006 Coll., on construction documentation, as amended in the Decree No. 62/2013 Coll. according to the teacher's instructions.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Lecture
Seminar
Exercise
Excursion - language
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Group Teaching - Cooperation
Group Teaching - Collaboration
Project Teaching
Brainstorming
Critical Thinking
Individual Work– Individual or Individualized Activity
Teaching Supported by Multimedia Technologies
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 22 45 Preparation for the Final Test 10 19 project 20 30 Attendance on Seminars/Exercises/Tutorial/Excursion 52 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
- Teacher's information
- Attendance in lessons is defined in a separate internal standard of ITB (Evidence of attendance of students at ITB). It is compulsory, except of the lectures, for full-time students to attend 70 % lesson of the subjet in a semester.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2018
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (seminar tutor)
- Guaranteed by
- Ing. Jaroslav Staněk, DiS.
Lifelong learning Centre – Directorate of Study Administration and Lifelong Learning – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/CCV: Sun 25. 11. 13:05–16:20 D515, Sun 9. 12. 13:05–16:20 D515, B. Pelánková
- Prerequisites
- OBOR(CAP)
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
The capacity limit for the course is 45 student(s).
Current registration and enrolment status: enrolled: 0/45, only registered: 0/45 - fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Learning outcomes
- The student will be able to compose the documentation for entering and building construction (DPS) according to Annex No. 6 of Decree No. 499/2006 Coll., on construction documentation, as amended in the Decree No. 62/2013 Coll. according to the teacher's instructions.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicesummer 2018
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (seminar tutor)
Ing. Jiří Šál, Ph.D. (seminar tutor) - Guaranteed by
- Ing. Josef Musílek, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/S01: Fri 8:00–9:30 A3, Fri 9:40–10:25 A3, B. Pelánková
PRS_2/S02: Fri 10:25–11:10 A3, Fri 11:25–12:55 A3, B. Pelánková
PRS_2/S03: Wed 9:40–11:10 H109, Wed 11:25–12:10 H109, J. Šál - Prerequisites
- FORMA(P) && PRS_1 PRS_1
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
The capacity limit for the course is 45 student(s).
Current registration and enrolment status: enrolled: 0/45, only registered: 0/45 - fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Learning outcomes
- The student will be able to compose the documentation for entering and building construction (DPS) according to Annex No. 6 of Decree No. 499/2006 Coll., on construction documentation, as amended in the Decree No. 62/2013 Coll. according to the teacher's instructions.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2017
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (seminar tutor)
- Guaranteed by
- doc. Ing. Zuzana Rowland, MBA, PhD.
Lifelong learning Centre – Directorate of Study Administration and Lifelong Learning – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/CCV: Mon 9. 10. 10:30–12:00 A4, 10:30–12:00 A4, Mon 30. 10. 10:30–12:00 B4, Mon 20. 11. 10:30–12:00 B4, B. Pelánková
- Prerequisites
- OBOR(CAP)
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
The capacity limit for the course is 140 student(s).
Current registration and enrolment status: enrolled: 0/140, only registered: 0/140 - fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicesummer 2017
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Michal Kraus, Ph.D. (seminar tutor)
Ing. Blanka Pelánková (seminar tutor)
Ing. Jiří Šál, Ph.D. (seminar tutor) - Guaranteed by
- Ing. Michal Kraus, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/K11: Sun 26. 3. 14:50–16:20 B5, 16:30–18:00 B5, Sun 30. 4. 13:05–14:35 B5, 14:50–16:20 B5, 16:30–18:00 B5, B. Pelánková
PRS_2/S01: each even Thursday 8:00–9:30 H109, each even Thursday 9:40–11:10 H109, each even Thursday 11:25–12:55 H109, M. Kraus
PRS_2/S02: each even Tuesday 14:50–16:20 H109, each even Tuesday 16:30–18:00 H109, each even Tuesday 18:10–19:40 H109, M. Kraus
PRS_2/S03: Tue 12:10–12:55 H109, Tue 13:05–14:35 H109, J. Šál
PRS_2/S04: Tue 9:40–11:10 H109, Tue 11:25–12:10 H109, J. Šál - Prerequisites
- MAX_KOMBINOVANYCH(60) && MAX_PREZENCNICH(80) && PRS_1 PRS_1
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
The capacity limit for the course is 140 student(s).
Current registration and enrolment status: enrolled: 0/140, only registered: 0/140 - fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2016
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (seminar tutor)
- Guaranteed by
- doc. Ing. Zuzana Rowland, MBA, PhD.
Lifelong learning Centre – Directorate of Study Administration and Lifelong Learning – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/CCV: Tue 18. 10. 16:30–18:00 D215, Tue 1. 11. 16:30–18:00 D215, Tue 15. 11. 16:30–18:00 D215, Tue 29. 11. 16:30–18:00 D215, Tue 13. 12. 16:30–18:00 D215, B. Pelánková
- Prerequisites
- OBOR(CAP)
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České BudějoviceSummer 2016
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- doc. Ing. Václav Kupilík, CSc. (seminar tutor)
Ing. arch. Filip Landa (seminar tutor)
Ing. Blanka Pelánková (seminar tutor) - Guaranteed by
- Ing. arch. Filip Landa
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/K10: Sat 19. 3. 16:30–18:00 A5, 18:10–19:40 A5, Sat 30. 4. 8:00–9:30 A5, 9:40–11:10 A5, 11:25–12:55 A5, V. Kupilík
PRS_2/S01: Mon 15:45–18:00 A1, F. Landa
PRS_2/S02: Thu 14:50–17:05 A3, B. Pelánková
PRS_2/S03: Thu 17:25–19:40 A3, B. Pelánková
PRS_2/S04: Mon 13:05–15:20 A3, B. Pelánková - Prerequisites
- MAX_KOMBINOVANYCH(70) && MAX_PREZENCNICH(80) && PRS_1 PRS_1
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
The capacity limit for the course is 150 student(s).
Current registration and enrolment status: enrolled: 0/150, only registered: 0/150 - fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2015
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (seminar tutor)
- Guaranteed by
- doc. Ing. Zuzana Rowland, MBA, PhD.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Lifelong learning Centre – Directorate of Study Administration and Lifelong Learning – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/CAP: Wed 7. 10. 13:05–14:35 A1, Wed 21. 10. 13:05–14:35 A1, Wed 4. 11. 13:05–14:35 A1, Wed 18. 11. 13:05–14:35 A1, Wed 2. 12. 13:05–14:35 A1, B. Pelánková, výuka v rámci CCV
- Prerequisites
- OBOR(CAP)
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report. 2.Basics of project documentation, construction details. 3.The processing of project documentation, excavations, foundations, floor plans, 4. The processing of project documentation cross-sections, longitudinal section. 5. The processing of project documentation, details. 6. Assessment of selected details for thermal and acoustic techniques. 7.The processing of project documentation - ceiling construction. 8.The processing of project documentation or roof truss. 9. The processing of project documentation - views. 10. Development of a specialized part of the project (MEP, structural analysis, fire safety) 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions. 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
prezentace (in Czech) 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicesummer 2015
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Jiří Ježek (seminar tutor)
Ing. Vladimír Nývlt, MBA, Ph.D. (seminar tutor)
Ing. Blanka Pelánková (seminar tutor)
Ing. Peter Podmanický, Ph.D. (seminar tutor) - Guaranteed by
- Ing. Blanka Pelánková
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/K9: Sun 1. 3. 8:00–9:30 A2, 9:40–11:10 A2, 11:25–12:55 A2, Sat 25. 4. 16:30–18:00 A2, 18:10–19:40 A2, J. Ježek
PRS_2/S01: Tue 14:50–17:05 A2, M. Kovář
PRS_2/S02: Tue 17:25–19:40 A2, P. Podmanický
PRS_2/S03: Tue 17:25–19:40 D215, B. Pelánková
PRS_2/S04: Tue 11:25–13:40 D415, B. Pelánková
PRS_2/S05: Tue 14:50–17:05 D215, B. Pelánková
PRS_2/S06: Mon 14:50–17:05 B4, V. Nývlt - Prerequisites
- MAX_KOMBINOVANYCH(40) && MAX_PREZENCNICH(90)
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report. 2.Basics of project documentation, construction details. 3.The processing of project documentation, excavations, foundations, floor plans, 4. The processing of project documentation cross-sections, longitudinal section. 5. The processing of project documentation, details. 6. Assessment of selected details for thermal and acoustic techniques. 7.The processing of project documentation - ceiling construction. 8.The processing of project documentation or roof truss. 9. The processing of project documentation - views. 10. Development of a specialized part of the project (MEP, structural analysis, fire safety) 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions. 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
prezentace (in Czech) 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2014
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Jan Plachý, Ph.D. (seminar tutor)
- Guaranteed by
- Ing. Blanka Pelánková
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/CAP: Mon 13. 10. 13:00–15:00 D209L, Mon 20. 10. 13:00–15:00 D209L, Mon 3. 11. 13:00–15:00 D209L, Mon 10. 11. 15:00–17:00 D209L, Mon 24. 11. 15:00–17:00 D209L, Mon 1. 12. 15:00–17:00 D209L, Mon 8. 12. 15:00–17:00 D209L, Mon 15. 12. 15:00–17:00 D209L, J. Plachý, CCV - výuka kurzu v rámci CŽV
- Prerequisites
- OBOR(CAP)
Project documentation of the subject PRS_1 - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report. 2.Basics of project documentation, construction details. 3.The processing of project documentation, excavations, foundations, floor plans, 4. The processing of project documentation cross-sections, longitudinal section. 5. The processing of project documentation, details. 6. Assessment of selected details for thermal and acoustic techniques. 7.The processing of project documentation - ceiling construction. 8.The processing of project documentation or roof truss. 9. The processing of project documentation - views. 10. Development of a specialized part of the project (MEP, structural analysis, fire safety) 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions. 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
prezentace (in Czech) 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicesummer 2014
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Jiří Ježek (seminar tutor)
Ing. Blanka Pelánková (seminar tutor)
Ing. Karolína Škrlantová (seminar tutor)
Ing. Jiří Veselý (seminar tutor) - Guaranteed by
- Ing. Blanka Pelánková
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/K8: Sun 9. 3. 8:00–9:30 A2, 9:40–11:10 A2, Sun 6. 4. 8:00–9:30 A2, 9:40–11:10 A2, Sun 18. 5. 13:05–14:35 A2, K. Škrlantová
PRS_2/S01: Mon 13:05–15:34 A1, K. Škrlantová
PRS_2/S02: Mon 15:35–18:00 A1, K. Škrlantová
PRS_2/S03: Tue 14:50–17:04 A1, K. Škrlantová
PRS_2/S04: Thu 9:40–12:09 A3, K. Škrlantová
PRS_2/S05: Tue 17:05–19:40 A1, K. Škrlantová
PRS_2/S06: Wed 9:40–12:09 A1, K. Škrlantová
PRS_2/S07: Wed 12:10–14:35 A1, K. Škrlantová
PRS_2/S08: Wed 14:50–17:14 A1, J. Veselý
PRS_2/S09: Wed 17:15–19:40 A1, J. Veselý - Prerequisites
- PRS_1 PRS_1 && MAX_KOMBINOVANYCH(50) && MAX_PREZENCNICH(135)
Project documentation of the subject PRS_1 - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report. 2.Basics of project documentation, construction details. 3.The processing of project documentation, excavations, foundations, floor plans, 4. The processing of project documentation cross-sections, longitudinal section. 5. The processing of project documentation, details. 6. Assessment of selected details for thermal and acoustic techniques. 7.The processing of project documentation - ceiling construction. 8.The processing of project documentation or roof truss. 9. The processing of project documentation - views. 10. Development of a specialized part of the project (MEP, structural analysis, fire safety) 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions. 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
prezentace (in Czech) 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2013
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Jiří Ježek (seminar tutor)
- Guaranteed by
- Ing. Blanka Pelánková
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/K7: Sun 6. 10. 13:40–15:10 A5, 15:15–16:45 A5, Sun 24. 11. 8:00–9:30 A5, 9:40–11:10 A5, 12:00–13:30 A5, J. Ježek
- Prerequisites
- PRS_1 PRS_1 &&FORMA(K)
Project documentation of the subject PRS_1 - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report. 2.Basics of project documentation, construction details. 3.The processing of project documentation, excavations, foundations, floor plans, 4. The processing of project documentation cross-sections, longitudinal section. 5. The processing of project documentation, details. 6. Assessment of selected details for thermal and acoustic techniques. 7.The processing of project documentation - ceiling construction. 8.The processing of project documentation or roof truss. 9. The processing of project documentation - views. 10. Development of a specialized part of the project (MEP, structural analysis, fire safety) 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions. 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
prezentace (in Czech) 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicesummer 2013
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (seminar tutor)
Ing. arch. Aleš Valder (seminar tutor) - Guaranteed by
- Ing. Blanka Pelánková
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/S01: Tue 9:55–12:10 D315, B. Pelánková
PRS_2/S02: Tue 12:20–14:35 D315, B. Pelánková
PRS_2/S03: Tue 14:45–17:00 D316, A. Valder
PRS_2/S04: Tue 17:05–19:20 D316, A. Valder
PRS_2/S05: Wed 8:15–10:30 D316, B. Pelánková
PRS_2/S06: Wed 10:35–12:50 D316, B. Pelánková
PRS_2/S07: Wed 13:00–15:15 D316, B. Pelánková - Prerequisites
- PRS_1 PRS_1 &&FORMA(P)
Project documentation of the subject PRS_1 - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- Construction of Buildings (programme VŠTE, ST)
- Building Management (programme VŠTE, ST)
- XBuilding Management (programme VŠTE, ST)
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report. 2.Basics of project documentation, construction details. 3.The processing of project documentation, excavations, foundations, floor plans, 4. The processing of project documentation cross-sections, longitudinal section. 5. The processing of project documentation, details. 6. Assessment of selected details for thermal and acoustic techniques. 7.The processing of project documentation - ceiling construction. 8.The processing of project documentation or roof truss. 9. The processing of project documentation - views. 10. Development of a specialized part of the project (MEP, structural analysis, fire safety) 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions. 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- ŠEFCŮ, Ondřej, Bohumil ŠTUMPA a Karel MIKEŠ. 100 osvědčených stavebních detailů: tradice z pohledu dneška. 1. vyd. Praha: Grada Publishing, 2010, 210 s. Profi. ISBN 978-80-247-3580-1.
- ČSN 73 0540-2, 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví
- ČSN 73 0532 Akustika – Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků – Požadavky, 2010
- ŠEFCŮ, Ondřej, Bohumil ŠTUMPA a Karel MIKEŠ. 100 osvědčených stavebních detailů: tradice z pohledu dneška. 1. vyd. Praha: Grada Publishing, 2010, 210 s. Profi. ISBN 978-80-247-3114-8.
- PEŘINKOVÁ, Martina, Bohumil ŠTUMPA a Karel MIKEŠ. Půdní vestavby: [dispoziční zásady, správný návrh]. 1. vyd. Praha: Grada, 2011, 112 s. Profi. ISBN 978-80-247-3571-9.
- ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut, 2004-08-01.
- ŠESTÁKOVÁ, Irena, Pavel LUPAČ a Karel MIKEŠ. Budovy bez bariér: návrhy a realizace. 1. vyd. Praha: Grada, 2010, 125 s. Profi. ISBN 978-80-247-3225-1.
- ČSN 735305 Administrativní budovy a prostory, ICS 91.040.20. : ČNI, 2005.
- Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon
- recommended literature
- ŠÁLA, Jiří, Bohumil ŠTUMPA a Karel MIKEŠ. Tepelná ochrana budov: komentář k ČSN 73 0540. 1. vyd. Praha: Informační centrum ČKAIT, 2008, 290 s. Stavitel. ISBN 978-80-87093-30-6.
- REMEŠ, Josef, Bohumil ŠTUMPA a Karel MIKEŠ. Stavební příručka: to nejdůležitější z norem, vyhlášek a zákonů. 1. vyd. Praha: Grada, 2013, 191 s. Stavitel. ISBN 978-80-247-3818-5.
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 80 %
active participation - consultation 20 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2012
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. arch. Aleš Valder (seminar tutor)
- Guaranteed by
- Ing. Blanka Pelánková
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/S01: Fri 14:45–17:05 B3, A. Valder
PRS_2/S02: Fri 17:05–19:25 A4, A. Valder - Prerequisites
- PRS_1 PRS_1
Project documentation of the subject PRS_1 - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- Construction of Buildings (programme VŠTE, ST)
- Building Management (programme VŠTE, ST)
- XBuilding Management (programme VŠTE, ST)
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report. 2.Basics of project documentation, construction details. 3.The processing of project documentation, excavations, foundations, floor plans, 4. The processing of project documentation cross-sections, longitudinal section. 5. The processing of project documentation, details. 6. Assessment of selected details for thermal and acoustic techniques. 7.The processing of project documentation - ceiling construction. 8.The processing of project documentation or roof truss. 9. The processing of project documentation - views. 10. Development of a specialized part of the project (MEP, structural analysis, fire safety) 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions. 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- - ČSN EN ISO 717-2, 1998. Akustika - Hodnocení zvukové izolace stavebních konstrukcí a v budovách - Část 2: Kročejová neprůzvučnost. Třídící znak 730531.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN EN ISO 717-1 :1998. Akustika - Hodnocení zvukové izolace stavebních konstrukcí a v budovách -Část 1: Vzduchová neprůzvučnost. Třídící znak 730531.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 75 %
active participation - consultation 25 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicesummer 2012
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (seminar tutor)
- Guaranteed by
- Ing. Blanka Pelánková
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/S01: Wed 8:15–10:40 D315, B. Pelánková
PRS_2/S02: Wed 10:41–13:05 D315, B. Pelánková
PRS_2/S03: Wed 13:10–15:30 D215, B. Pelánková
PRS_2/S04: Thu 11:35–13:55 D315, B. Pelánková
PRS_2/S05: Thu 13:55–14:40 D415, Thu 14:45–16:15 D616, B. Pelánková - Prerequisites
- PRS_1 PRS_1 && FORMA(P)
Project documentation of the subject PRS_1 - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- Building Management (programme VŠTE, ST)
- XBuilding Management (programme VŠTE, ST)
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report. 2.Basics of project documentation, construction details. 3.The processing of project documentation, excavations, foundations, floor plans, 4. The processing of project documentation cross-sections, longitudinal section. 5. The processing of project documentation, details. 6. Assessment of selected details for thermal and acoustic techniques. 7.The processing of project documentation - ceiling construction. 8.The processing of project documentation or roof truss. 9. The processing of project documentation - views. 10. Development of a specialized part of the project (MEP, structural analysis, fire safety) 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions. 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- - ČSN EN ISO 717-2, 1998. Akustika - Hodnocení zvukové izolace stavebních konstrukcí a v budovách - Část 2: Kročejová neprůzvučnost. Třídící znak 730531.
- - ČSN EN ISO 717-1 :1998. Akustika - Hodnocení zvukové izolace stavebních konstrukcí a v budovách -Část 1: Vzduchová neprůzvučnost. Třídící znak 730531.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 29 project 39 39 Attendance on Lectures 39 Attendance on Seminars/Exercises/Tutorial/Excursion 10 Total: 78 78 - Assessment Methods and Assesment Rate
- Project – semestral 75 %
active participation 25 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2011
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Alena Hynková, CSc. (seminar tutor)
- Guaranteed by
- Ing. Jan Plachý, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Timetable of Seminar Groups
- PRS_2/S01: Tue 13:10–14:40 A2, Tue 14:45–15:30 A2, A. Hynková
- Prerequisites (in Czech)
- ( PRS_1 PRS_1 )&&FORMA(P)
PRS_1 - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
The capacity limit for the course is 15 student(s).
Current registration and enrolment status: enrolled: 0/15, only registered: 0/15 - fields of study / plans the course is directly associated with
- Building Management (programme VŠTE, ST)
- XBuilding Management (programme VŠTE, ST)
- Course objectives supported by learning outcomes
- The aim of the subject is the elaboration of a project for building licence, processing and coordination of particular specialized construction professions and completion of the project. Development of the project to the level of detailed documentation. Projects will focus on individual expertise: building physics, staticss, building materials, technological processes. On the basis of these specialties there will be prepared summaries of topics and analytical studies of the given issues.
- Syllabus
- - Project of an object of civil, industrial or agricultural buildings, wood or low-energy buildings - Situation 1: 200 - Design and selection of design solutions M 1:100 - Drawing of a shape 1:50 - Ground plans 1:50 - Views of 1:100 or 1:50 - Sections 1:50 - Foundations 1:50 - Ground plans of roofs 1:50 - Details M 1:5 - Technical report, extracts features - Analytical studies - The processing of components of the project M & E, statics and fire safety of buildings
- Literature
- Soubor literatury z předcházejících odborně zaměřených předmětů.
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 29 project 39 39 Attendance on Lectures 39 Attendance on Seminars/Exercises/Tutorial/Excursion 10 Total: 78 78 - Assessment Methods and Assesment Rate
- Project – semestral 75 %
aktivní účast - konzultace (in Czech) 25 %
- Language of instruction
- Czech
- Further Comments
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicesummer 2011
- Extent and Intensity
- 0/3. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Jan Plachý, Ph.D. (seminar tutor)
Ing. Petra Bednářová, Ph.D. (assistant) - Guaranteed by
- Ing. Petra Bednářová, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Contact Person: Ing. Alena Hynková, CSc. - Timetable of Seminar Groups
- PRS_2/01: Mon 8:15–10:40 D216, J. Plachý
PRS_2/02: Wed 13:50–16:15 D216, J. Plachý
PRS_2/03: Tue 8:15–10:40 D616, J. Plachý - Prerequisites (in Czech)
- PRS_1 PRS_1
PRS_1 - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- Building Management (programme VŠTE, ST)
- XBuilding Management (programme VŠTE, ST)
- Course objectives supported by learning outcomes
- The aim of the subject is the elaboration of a project for building licence, processing and coordination of particular specialized construction professions and completion of the project. Development of the project to the level of detailed documentation. Projects will focus on individual expertise: building physics, staticss, building materials, technological processes. On the basis of these specialties there will be prepared summaries of topics and analytical studies of the given issues.
- Syllabus
- - Project of an object of civil, industrial or agricultural buildings, wood or low-energy buildings - Situation 1: 200 - Design and selection of design solutions M 1:100 - Drawing of a shape 1:50 - Ground plans 1:50 - Views of 1:100 or 1:50 - Sections 1:50 - Foundations 1:50 - Ground plans of roofs 1:50 - Details M 1:5 - Technical report, extracts features - Analytical studies - The processing of components of the project M & E, statics and fire safety of buildings
- Literature
- Soubor literatury z předcházejících odborně zaměřených předmětů.
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 29 project 39 39 Attendance on Lectures 39 Attendance on Seminars/Exercises/Tutorial/Excursion 10 Total: 78 78 - Assessment Methods and Assesment Rate
- Project – semestral 75 %
aktivní účast - konzultace (in Czech) 25 %
- Language of instruction
- Czech
- Further Comments
- The course is taught annually.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2022
The course is not taught in winter 2022
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (lecturer)
- Guaranteed by
- Ing. Lukáš Polanecký
Lifelong learning Centre – Directorate of Study Administration and Lifelong Learning – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Prerequisites
- OBOR(CAP)
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Learning outcomes
- The student will be able to compose the documentation for entering and building construction (DPS) according to Annex No. 6 of Decree No. 499/2006 Coll., on construction documentation, as amended in the Decree No. 62/2013 Coll. according to the teacher's instructions.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
The course is taught: every week.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2021
The course is not taught in winter 2021
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (lecturer)
- Guaranteed by
- Ing. Lukáš Polanecký
Lifelong learning Centre – Directorate of Study Administration and Lifelong Learning – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Prerequisites
- OBOR(CAP)
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Learning outcomes
- The student will be able to compose the documentation for entering and building construction (DPS) according to Annex No. 6 of Decree No. 499/2006 Coll., on construction documentation, as amended in the Decree No. 62/2013 Coll. according to the teacher's instructions.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
The course is taught: every week.
PRS_2 Project II CE
Institute of Technology and Business in České Budějovicewinter 2020
The course is not taught in winter 2020
- Extent and Intensity
- 0/3/0. 4 credit(s). Type of Completion: z (credit).
- Teacher(s)
- Ing. Blanka Pelánková (lecturer)
- Guaranteed by
- Ing. Lukáš Polanecký
Lifelong learning Centre – Directorate of Study Administration and Lifelong Learning – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice - Prerequisites
- OBOR(CAP)
Project documentation of the subject PRS_1. The subject can not enroll a student who has not subject PRS_1. - Course Enrolment Limitations
- The course is only offered to the students of the study fields the course is directly associated with.
- fields of study / plans the course is directly associated with
- there are 8 fields of study the course is directly associated with, display
- Course objectives supported by learning outcomes
- The aim is processing of a project for the construction from the project 1. Preparation and coordination of the various specialized construction professions and management of project completion. Students will know about preparation for implementation of the construction project and s/he is able to complete the project for the implementation of construction corresponding to the investor's requirements and relevant legislation.
- Learning outcomes
- The student will be able to compose the documentation for entering and building construction (DPS) according to Annex No. 6 of Decree No. 499/2006 Coll., on construction documentation, as amended in the Decree No. 62/2013 Coll. according to the teacher's instructions.
- Syllabus
- 1. Introduction to the Construction Law requirements for design documentation for the construction and other selected terms from the state report
- 2.Basics of project documentation, construction details
- 3.The processing of project documentation, excavations, foundations, floor plans
- 4. The processing of project documentation cross-sections, longitudinal section
- 5. The processing of project documentation, details
- 6. Assessment of selected details for thermal and acoustic techniques
- 7.The processing of project documentation - ceiling construction
- 8.The processing of project documentation or roof truss
- 9. The processing of project documentation - views
- 10. Development of a specialized part of the project (MEP, structural analysis, fire safety)
- 11.Processing accompanying report, summary technical report. 12. Processing of the technical report for architectural and engineering solutions
- 13. Processing - technical reports for building component, technical report for environmental engineering buildings
- Literature
- required literature
- - Stavební zákon 183/2006 Sb. (14. 3. 2006) - O územním plánování a stavebním řádu. Stavební zákon.
- ČSN 73 0532: 2010. Akustika - Ochrana proti hluku v budovách a posuzování akustických vlastností stavebních výrobků - Požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 01 3420:2004. Výkresy pozemních staveb – kreslení výkresů stavební části. Český normalizační institut. 2004-08-01.
- - ČSN 73 0540-2 . 2011.Tepelná ochrana budov - Část 2: Požadavky. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-11-01. Třídící znak 730540.
- - ČSN 73 0834:2011. Požární bezpečnost staveb - Změny staveb. Ústav pro technickou normalizaci, metrologii a státní zkušebnictví.2011-04-01. Třídící znak 730834.
- ČSN 73 41 30:2010. Schodiště a šikmé rampy - Základní požadavky. Úřad pro technickou normalizaci, metrologii a státní zkušebmictví, 2010
- - ČSN 73 43 01: 2004. Obytné budovy. Praha: Český normalizační institut. 2004-07-01. Třídící znak 734301.
- REMEŠ, Josef, Ivana UTÍKALOVÁ, Petr KACÁLEK, Lubor KALOUSEK, Tomáš PETŘÍČEK, Tomáš APELTAUER, Jan PLACHÝ, Radim SMOLKA and Lukáš ŽIŽKA. Stavební příručka: To nejdůležitější z norem, vyhlášek a zákonů, 2., aktualizované vydání. (Building Guide: The most important of standards, regulations and laws, 2nd, updated edition.). 2., aktual. vyd. Praha: Grada Publishing, 2014, 248 pp. stavitel. ISBN 978-80-247-5142-9. info
- recommended literature
- - NOVOTNÝ, J. , 2007. Cvičení z pozemního stavitelství, konstrukční cvičení. Praha: Sobotáles. ISBN 978-80-86817-23-1.
- NEUFERT, Ernst and Peter NEUFERT. Navrhování staveb : zásady, normy, předpisy o zařízeních, stavbě, vybavení, nárocích na prostor, prostorových vztazích, rozměrech budov, prostorech, vybavení, přístrojích z hlediska člověka jako měřítka a cíle : příručka pro stavební odborníky, stavebník. 2. české vyd. Praha: Consultinvest, 2000, 618 s. ISBN 80-901486-6-2. info
- Forms of Teaching
- Exercise
Tutorial
Consultation - Teaching Methods
- Frontal Teaching
Critical Thinking
Individual Work– Individual or Individualized Activity
discusion
- Student Workload
Activities Number of Hours of Study Workload Daily Study Combined Study Preparation for Seminars, Exercises, Tutorial 25 54 project 40 40 Attendance on Seminars/Exercises/Tutorial/Excursion 39 10 Total: 104 104 - Assessment Methods and Assesment Rate
- Project – semestral 70 %
Consultation 20 %
Presentation 10 % - Exam conditions
- 70% attendance (3 absences without an excuse)of attendance is required. The drawings and studies of the project will be consulted. The project will have a graphic prescribed level. Additional requirements - refer to instructions to practice (student receives in the first week of semester).
- Language of instruction
- Czech
- Further comments (probably available only in Czech)
- The course is taught annually.
The course is taught: every week.
- Enrolment Statistics (recent)