Your selection contains 96 outcomes. Edit selection.
Filter publications

    2024

    1. PROCHÁZKA, Robert, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Tozan HAKAN, Cristina BORZAN, Milan KADNÁR, Zuzana PALKOVÁ, Roman GÁLIK and Karolína SLAMOVÁ. Collection of Plastic Packaging of Various Types: Sorting of Fractions of Plastic Waste Using Both Automated and Manual Modes. IEEE Access. New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2024, Neuveden, Neuveden, p. 44244-44261. ISSN 2169-3536.
      URL
      Name in Czech: Sbírka plastových obalů různých typů: Třídění frakcí plastového odpadu automatizovaným i ručním způsobem
      Name (in English): Collection of Plastic Packaging of Various Types: Sorting of Fractions of Plastic Waste Using Both Automated and Manual Modes
      RIV: Article in a journal. English. United States of America.
      Procházka, Robert (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
      Keywords in English: manual and automated sorting; Municipal plastic waste; operation mode economy; optical sorting equipment; processing parameters

      Changed by: Barbora Kroupová, učo 25655. Changed: 22/10/2024 13:58.
    2. HARNIČÁROVÁ, Marta, Jan VALÍČEK and Vladimír ŠEPEĽÁK. Editorial: Recent advances in the identification of stress-strain states of materials. Frontiers in Materials. LAUSANNE , SWITZERLAND: Frontiers Media S.A, 2024, Neuveden, Neuveden, p. 1-2. ISSN 2296-8016.
      URL
      Name in Czech: Editorial: Nejnovější pokroky v identifikaci napěťově-deformačních stavů materiálů
      Name (in English): Editorial: Recent advances in the identification of stress-strain states of materials
      RIV: Article in a journal. English. Switzerland.
      Harničárová, Marta (203 Czech Republic, guarantor, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
      Keywords in English: mechanical behavior; residual stress; stress-strain states; surface layers; surface texture

      Changed by: Barbora Kroupová, učo 25655. Changed: 22/10/2024 14:32.
    3. KHALILIA, Walid, Marta HARNIČÁROVÁ, Tawfiq QUBBAJ, Yahya ISTAITIH, Aziz A. SALAMEH, Munqez J.Y. SHTAYA, Jan VALÍČEK, Sabri SAGHIR, Abdalhadi F. DEGHLES and Ahmed ABU SHABAN. STUDENT’S AWARENESS, KNOWLEDGE, AND PERCEPTIONS OF PRECISION AGRICULTURE TECHNOLOGY IN PALESTINIAN AGRICULTURAL FACULTIES. Academic Journal of Manufacturing Engineering. Cluj Napoca: Editura Politehnica, 2024, vol. 22, No 1, p. 135-144. ISSN 1583-7904.
      URL
      Name in Czech: POVĚDOMÍ, ZNALOSTI A VNÍMÁNÍ TECHNOLOGIÍ PRECIZNÍHO ZEMĚDĚLSTVÍ STUDENTY PALESTINSKÝCH ZEMĚDĚLSKÝCH FAKULT
      Name (in English): STUDENT’S AWARENESS, KNOWLEDGE, AND PERCEPTIONS OF PRECISION AGRICULTURE TECHNOLOGY IN PALESTINIAN AGRICULTURAL FACULTIES
      RIV: Article in a journal. English. Romania.
      Khalilia, Walid (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
      Keywords in English: Drony; Vzdělávání; Internet věcí; Přesné zemědělství; Chytré zemědělství

      Changed by: Barbora Kroupová, učo 25655. Changed: 22/10/2024 13:38.

    2023

    1. KADNÁR, Milan, Peter KÁČER, Marta HARNIČÁROVÁ, Jan VALÍČEK, František TÓTH, Marián BUJNA, Milena KUŠNEROVÁ, Rastislav MIKUŠ and Marian BORŽAN. Comparison of Linear Regression and Artificial Neural Network Models for the Dimensional Control of the Welded Stamped Steel Arms. Mathematical machines and systems. Ukrajina: Institute of Mathematical Machines and Systems of the NAS of Ukraine, 2023, vol. 11, No 3, p. 1-18. ISSN 1028-9763.
      URL
      RIV/75081431:_____/23:00002544 Article in a journal. English. Ukraine.
      Kadnár, Milan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
      Keywords in English: welding; distortion; stamping; model; prediction; neural network

      Changed by: Barbora Kroupová, učo 25655. Changed: 26/4/2023 12:31.
    2. DANEL, Roman, Marta HARNIČÁROVÁ, Walid KHALILIA, Zuzana PALKOVÁ, Khalid HARDAN, Talat ABURAJABALTAMIMI, Yahya ISTAITIH, Jan VALÍČEK and Michal ŘEPKA. ERASMUS+ PROJECT 'BENEFIT' - BOOSTING INNOVATION IN DIGITAL FARMING. In Doucek Petr; Sonntag Michael; Nedomova Lea. IDIMT-2023. Hradec Králové: Trauner Verlag Universitat, 2023, p. 169-176. ISBN 978-3-99151-176-2. Available from: https://dx.doi.org/10.35011/IDIMT-2023-169.
      URL
      Name in Czech: PROJEKT ERASMUS+ „BENEFIT“ – PODPORA INOVACE V DIGITÁLNÍM ZEMĚDĚLSTVÍ
      RIV: Proceedings paper. English. Austria.
      Danel, Roman (203 Czech Republic, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution)
      Keywords in English: BENEFIT; Erasmus+;digital farming; precious agriculture; EU–Palestine cooperation; Agriculture 4.0; aquaponics farm
      Type of proceedings: post-proceedings
      International impact: yes
      Reviewed: yes

      Changed by: Ing. Roman Danel, Ph.D., učo 24564. Changed: 8/2/2024 22:50.
    3. KOPAL, Ivan, Ivan LABAJ, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Hakan TOZAN. Intelligent Modelling of the Real Dynamic Viscosity of Rubber Blends Using Parallel Computing. Polymers. Basel, Switzerland: MDPI, 2023, vol. 15, No 17, p. 1-20. ISSN 2073-4360.
      URL
      RIV/75081431:_____/23:00002613 Article in a journal. English. Switzerland.
      Kopal, Ivan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
      Keywords in English: rubber blends; curing process; intelligent modelling; generalised regression neural network; parallel computing

      Changed by: Barbora Kroupová, učo 25655. Changed: 4/12/2023 13:59.
    4. ŠAFÁŘ, Marek, Jan VALÍČEK, Marta HARNIČÁROVÁ, Michal ŠAJGALÍK, Hakan TOZAN, Milena KUŠNEROVÁ, Mário DRBÚL, Milan KADNÁR and Andrej CZÁN. Proposal for the identification of residual stresses after turning and hardening of bearing steel. Frontiers in Materials. LAUSANNE , SWITZERLAND: Frontiers Media S.A, 2023, vol. 10, Neuveden, p. 1-17. ISSN 2296-8016.
      URL
      RIV/75081431:_____/23:00002614 Article in a journal. English. Switzerland.
      Šafář, Marek (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
      Keywords in English: residual stress; bearing steel; measurement; evaluation of measurement results; modelling

      Changed by: Barbora Kroupová, učo 25655. Changed: 4/12/2023 14:18.
    5. VALÍČEK, Jan, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Zuzana PALKOVÁ, Ivan KOPAL, Cristina BORZAN, Andrej CZÁN, Rastislav MIKUŠ, Stanislaw DUER and Vladimír ŠEPÁLEK. Stress-strain parameter prediction method for AWJ technology from surface topography. International journal of advanced manufacturing technology. London, United Kingdom: Springer, 2023, vol. 127, 5-6, p. 2617-2635. ISSN 0268-3768.
      URL
      RIV/75081431:_____/23:00002612 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
      Valíček, Jan (203 Czech Republic, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
      Keywords in English: Surface roughness; Mechanical parameters; Abrasive waterjet; Material plasticity; Deformation

      Changed by: Barbora Kroupová, učo 25655. Changed: 4/12/2023 12:46.
    6. LABAJ, Ivan, Petra SKALKOVÁ, Ivan KOPAL, Júlia VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Peter BOŠKO and Jana DOBROVSKÁ. Study of the influence of Chitosan on selected properties of elastomeric blends. Materialwissenschaft und Werkstofftechnik. Verlag Wiley-VCH, 2023, vol. 54, No 4, p. 429-440. ISSN 0933-5137.
      URL
      RIV/75081431:_____/23:00002550 Article in a journal. English. Germany.
      Labaj, Ivan (703 Slovakia, guarantor) -- Skalková, Petra (703 Slovakia) -- Kopal, Ivan (703 Slovakia) -- Vršková, Júlia (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Boško, Peter (703 Slovakia) -- Dobrovská, Jana (203 Czech Republic)
      Keywords in English: chitosan; carbonblack; elastomericblends; naturalrubber; thermo-oxidativeaging

      Changed by: Barbora Kroupová, učo 25655. Changed: 10/5/2023 13:30.

    2022

    1. KOPAL, Ivan, Ivan LABAJ, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Darina ONDRUŠOVÁ, Jan KRMELA and Zuzana PALKOVÁ. A Generalized Regression Neural Network Model for Predicting the Curing Characteristics of Carbon Black-Filled Rubber Blends. Polymers. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, vol. 14, No 4, p. nestránkováno, 18 pp. ISSN 2073-4360.
      URL
      RIV/75081431:_____/22:00002337 Article in a journal. English. Switzerland.
      Kopal, Ivan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
      Keywords in English: rubber blends; curing process; modelling; generalized regression neural network

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 20/3/2023 17:22.
    2. PANDA, Anton, Volodymyr NAHORNYI, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Petr BARON, Iveta PANDOVÁ and Patrik SOROČIN. A novel method for online monitoring of surface quality and predicting tool wear conditions in machining of materials. The International Journal of Advanced Manufacturing Technology. Londýn, Spojené království: SPRINGER LONDON LTD, 2022, vol. 123, No 5, p. 3599-3612, 88 pp. ISSN 0268-3768.
      URL
      RIV/75081431:_____/22:00002449 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
      Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
      Keywords in English: Turning; Roughing; Finishing; Surface roughness; Tool wear degree

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 20:18.
    3. PANDA, Anton, Kostiantyn DYADYURA, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Tatyana IVAKHNIUK, Liudmyla HREBENYK, Oleksandr SAPRONOV, Vitalii SOTSENKO, Pavlo VOROBIOV, Vitalii LEVYTSKYI, Andriy BUKETOV and Iveta PANDOVA. Ecotoxicity Study of New Composite Materials Based on Epoxy Matrix DER-331 Filled with Biocides Used for Industrial Applications. Polymers. Basel, Switzerland: MDPI, 2022, 14/2022, No 16, p. 3275-3302. ISSN 2073-4360.
      URL
      RIV/75081431:_____/22:00002392 Article in a journal. English. Switzerland.
      Panda, Anton (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
      Keywords in English: epoxy-composite; antifouling; bioaccumulation; marine pollution; structure of surface; marine bacteria; Bifidobacterium bifidum; Lactobacillus acidophilus

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 21/3/2023 18:42.
    4. CZÁN, Andrej, Richard JOCH, Michal ŠAJGALÍK, Jozef HOLUBJÁK, Andrej HORÁK, Pavol TIMKO, Jan VALÍČEK, Milena KUŠNEROVÁ and Marta HARNIČÁROVÁ. Experimental Study and Verification of New Monolithic Rotary Cutting Tool for an Active Driven Rotation Machining. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 5, p. nestránkováno, 17 pp. ISSN 1996-1944.
      URL
      RIV/75081431:_____/22:00002338 Article in a journal. English. Switzerland.
      Czán, Andrej (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
      Keywords in English: turning; rotary tool; cutting force; actively driven tool; surface texture

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 20/3/2023 17:24.
    5. HARNIČÁROVÁ, Marta, Jan VALÍČEK, Stanislaw DUER, Milena KUŠNEROVÁ, Zuzana PALKOVÁ and Zuzana MITAĽOVÁ. Express diagnostics of stress-strain states of materials. Materialwissenschaft und Werkstofftechnik. Weinheim, Germany: Verlag Wiley-VCH, 2022, 53/2022, No 4, p. 394-401. ISSN 0933-5137.
      URL
      RIV/75081431:_____/22:00002341 Article in a journal. English. Germany.
      Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
      Keywords in English: Ultrasound; non-destructive diagnostics; stress-strain curve

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 20/3/2023 17:30.
    6. KOVÁČ, Ivan, Rastislav MIKUŠ, Jozef ŽARNOVSKÝ, Róbert DRLIČKA, Marta HARNIČÁROVÁ, Jan VALÍČEK and Milan KADNÁR. Increasing the wear resistance of surface layers of selected steels by TIG electric arc surface remelting process using a powder based on CaCN2. The International Journal of Advanced Manufacturing Technology. Londýn, Spojené království Velké Británi: SPRINGER LONDON LTD, 2022, vol. 123, No 5, p. 1985-1997, 14 pp. ISSN 0268-3768.
      URL
      RIV/75081431:_____/22:00002448 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
      Kováč, Ivan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
      Keywords in English: TIG surface remelting; CaCN2-based powder; Hardness; Wear resistance

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 20:17.
    7. NAHORNYI, Volodymyr, Anton PANDA, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Iveta PANDOVÁ, Stanislaw LEGUTKO, Zuzana PALKOVÁ and Ondrej LUKÁČ. Method of Using the Correlation between the Surface Roughness of Metallic Materials and the Sound Generated during the Controlled Machining Process. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 3, p. nestránkováno, 22 pp. ISSN 1996-1944.
      URL
      RIV/75081431:_____/22:00002339 Article in a journal. English. Switzerland.
      Nahornyi, Volodymyr (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
      Keywords in English: steel; CNC lathe; generated sound; surface roughness; tool wear; adaptive control of the cutting process

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 20/3/2023 17:25.
    8. PALKOVÁ, Zuzana, Marta HARNIČÁROVÁ, Jan VALÍČEK, Vojtěch STEHEL, Walid Mahmoud KHALILIA, Nikolay MIHAILOV, Maria FRAGKAKI and Aziz Abdel Karim Awad SALAMEH. Perspective of education in Agriculture 4.0 in selected countries in European Union and Palestine. Online. In Boris Evstatiev. 2022 8th International Conference on Energy Efficiency and Agricultural Engineering, EE and AE 2022. 8th ed. Ruse, Bulgaria: Institute of Electrical and Electronics Engineers Inc. (IEEE), 2022, p. nestránkováno, 677 pp. ISBN 978-1-6654-0709-0.
      URL
      RIV/75081431:_____/22:00002391 Proceedings paper. English. Bulgaria.
      Palková, Zuzana (703 Slovakia, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution)
      Keywords in English: precision agriculture; digitalization; rural areas; Palestine; BENEFIT project
      Type of proceedings: post-proceedings

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 12/9/2022 08:57.
    9. GAVLAS, Martin, Michal KACO, Vladimir DEKÝŠ, Miroslav ŠPIRIAK, Silvia SLABEJOVÁ, Andrej CZÁN, Jozef HOLUBJAK, Milena KUŠNEROVÁ, Marta HARNIČÁROVÁ and Jan VALÍČEK. Research on the Oscillation in Centerless Grinding Technology When Machining Bearing Steel. Materials. Basel, Switzerland: MDPI, 2022, neuveden, 15/2022, p. nestránkováno, 14 pp. ISSN 1996-1944.
      URL
      RIV/75081431:_____/22:00002387 Article in a journal. English. Switzerland.
      Gavlas, Martin (guarantor) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
      Keywords in English: centerless grinding; vibrodiagnostics; analysis of the run-up and run-down; boxplot; spectral analysis; STFT; geometric deviation

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 21/3/2023 18:34.
    10. HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Ivan KOPAL, Miloslav LUPTÁK, Rastislav MIKUŠ, Zdeněk PAVELEK, Martin FABIÁN and Vladimír ŠEPEĽÁK. Structural and Mechanical Changes of AlMgSi0.5 Alloy during Extrusion by ECAP Method. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 6, p. nestránkováno, 22 pp. ISSN 1996-1944.
      URL
      RIV/75081431:_____/22:00002340 Article in a journal. English. Switzerland.
      Harničárová, Marta (203 Czech Republic, guarantor, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Pavelek, Zdeněk (203 Czech Republic, belonging to the institution) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
      Keywords in English: aluminium alloy; intensive plastic deformation method; microstructure; mechanical properties

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 20/3/2023 17:28.
    11. KHALILIA, Walid, Miroslav GOMBÁR, Zuzana PALKOVÁ, Michal PALKO, Jan VALÍČEK and Marta HARNIČÁROVÁ. Using Virtual Reality as Support to the Learning Process of Forensic Scenarios. IEEE Access. New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2022, vol. 2022, neuvedeno, p. 83297-83310. ISSN 2169-3536.
      URL
      RIV/75081431:_____/22:00002394 Article in a journal. English. United States of America.
      Khalilia, Walid (guarantor) -- Palková, Zuzana (703 Slovakia, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
      Keywords in English: Forensic science; learning strategies; problem solving; virtual reality

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 21/3/2023 18:47.

    2021

    1. HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Zuzana PALKOVÁ, Ivan KOPAL, Cristina BORZAN, Milan KADNÁR and Stanislav PAULOVIČ. A New Method of Predicting the Structural and Mechanical Change of Materials during Extrusion by the Method of Multiple Plastic Deformations. Materials. Basel, Switzerland: MDPI, 2021, volume 14, No 10, p. 2594-2616. ISSN 1996-1944.
      URL
      RIV/75081431:_____/21:00002097 Article in a journal. English. Switzerland.
      Harničárová, Marta (203 Czech Republic, guarantor, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
      Keywords in English: welding; distortion; stamping; model; prediction

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 25/6/2021 08:49.
    2. KUŠNEROVÁ, Milena, Michal ŘEPKA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Roman DANEL and Zuzana PALKOVÁ. A study of the connection between bending stress and belt friction using a servomotor controlled by a computer. IEEE Access. IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2021, vol. 9, No 2021, p. 11173-11182. ISSN 2169-3536. Available from: https://dx.doi.org/10.1109/ACCESS.2021.3049971.
      URL
      Name in Czech: Studie vztahu mezi ohybovým napětím a třením pásu pomocí servomotoru řízeného počítačem
      RIV/75081431:_____/21:00001966 Article in a journal. English. United States of America.
      Kušnerová, Milena (203 Czech Republic, guarantor, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Danel, Roman (203 Czech Republic, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
      Keywords in English: engineering educational process; friction; bending coefficient; belt

      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 31/3/2021 12:46.
    3. DARIN, G., K. IMAKUMA, R.T. SANTIAGO, K.L. DA SILVA, L.F. CÓTICA, M. FABIÁN, Jan VALÍČEK, H. HAHND and Vladimír ŠEPEĽÁK. Disordered Gd6UO12-δ with the cation antisite defects prepared by a combined mechanochemical−thermal method. Journal of Nuclear Materials. AMSTERDAM, NETHERLANDS: ELSEVIER, 2021, 549/2021, June 2021, p. 152895-152900. ISSN 0022-3115.
      URL
      RIV/75081431:_____/21:00002108 Article in a journal. English. Netherlands.
      Darin, G. (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
      Keywords in English: Gd6UO12; Cation antisite disorder; Oxygen deficiency; Mechanochemistry; Rietveld refinement

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 30/6/2021 14:31.
    4. FABIAN, Martin, Dirk MENZEL, Anatoly Ye YERMAKOV, Hristo KOLEV, Maria KAŇUCHOVÁ, Jianmin SHI, Jaroslav KOVÁČ, Nina KOSTOVA, Da Silva KLEBSON L., Senna MAMORU, Marta HARNIČÁROVÁ, Jan VALÍČEK, Hahn HORST and Vladimír ŠEPEĽÁK. Nanostructure and magnetic anomaly of mechanosynthesized Ce1-xYxO2-delta (x <= 0.3) solid solutions. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS. Neuveden: PERGAMON-ELSEVIER SCIENCE LTD, 2021, vol. 148, January, p. 1-7. ISSN 0022-3697. Available from: https://dx.doi.org/10.1016/j.jpcs.2020.109673.
      URL
      Name in Czech: Nanostruktura a magnetická anomálie mechanosyntetizovaného Ce1-xYxO2-delta (x <= 0.3) pevné roztoky
      RIV/75081431:_____/21:00001936 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
      Fabian, Martin (703 Slovakia, guarantor) -- Menzel, Dirk (276 Germany) -- Yermakov, Anatoly Ye (643 Russian Federation) -- Kolev, Hristo (703 Slovakia) -- Kaňuchová, Maria (703 Slovakia) -- Shi, Jianmin (276 Germany) -- Kováč, Jaroslav (703 Slovakia) -- Kostova, Nina (100 Bulgaria) -- Klebson L., Da Silva (76 Brazil) -- Mamoru, Senna (392 Japan) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Horst, Hahn (276 Germany) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
      Keywords in English: Ceria-yttria solid solution; Mechanosynthesis; Room-temperature ferromagnetism; Oxygen vacancies

      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 4/2/2021 12:59.
    5. KADNÁR, Milan, Peter KÁČER, Marta HARNIČÁROVÁ, Jan VALÍČEK, Mirek GOMBÁR, Milena KUŠNEROVÁ, František TÓTH, Marian BORŽAN and Juraj RUSNÁK. Prediction Model of the Resulting Dimensions of Welded Stamped Parts. Materials. Basel, Switzerland: MDPI, 2021, volume 14/, No 11, p. 3062-3078. ISSN 1996-1944.
      URL
      RIV/75081431:_____/21:00002096 Article in a journal. English. Switzerland.
      Kadnár, Milan (guarantor) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
      Keywords in English: welding; distortion; stamping; model; prediction

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 25/6/2021 08:27.
    6. DARIN, Gaspar, Kengo IMAKUMA, Rafael Trautwein SANTIAGO, Klebson Lucenildo DA SILVA, Luiz Fernardo CÓTICA, Martin FABIÁN, Jan VALÍČEK, Horst HAHN and Vladimír ŠEPEĽÁK. X-ray diffraction and thermoanalytical datasets of precursors of the Gd6UO12-δ phase processed by combined mechanochemical−thermal routes. Data in Brief. Netherlands: Elsevier BV, 2021, volume 35, April 2021, p. 106972-106977. ISSN 2352-3409.
      URL
      RIV/75081431:_____/21:00002095 Article in a journal. English. Netherlands.
      Darin, Gaspar (guarantor) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
      Keywords in English: Gd6UO12; Rietveld refinement; XRD; Thermal analysis; Mechanochemistry

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 25/6/2021 07:56.

    2020

    1. KUŠNEROVÁ, Milena, Michal ŘEPKA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Roman DANEL, Ján KMEC and Zuzana PALKOVÁ. A new way of measuring the belt friction coefficient using a digital servomotor. Measurement: Journal of the International Measurement Confederation. Netherlands: Elsevier B.V., 2020, vol. 150, January 2020, p. nestránkováno, 2 pp. ISSN 0263-2241. Available from: https://dx.doi.org/10.1016/j.measurement.2019.107100.
      URL
      Name in Czech: Nový způsob měření koeficientu tření pásu pomocí digitálního servomotoru
      RIV/75081431:_____/20:00001697 Article in a journal. English. Netherlands.
      Kušnerová, Milena (203 Czech Republic, guarantor, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Danel, Roman (203 Czech Republic, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
      Keywords in English: Belt friction coefficient; Computer-controlled experiment; Digital servomotor; Euler frictional force

      Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:42.
    2. PANDOVÁ, Iveta, Miroslav RIMÁR, Anton PANDA, Jan VALÍČEK, Milena KUŠNEROVÁ and Marta HARNIČÁROVÁ. A Study of Using Natural Sorbent to Reduce Iron Cations from Aqueous Solutions. International Journal of Environmental Research and Public Health. Basel: MDPI, 2020, vol. 17, No 10, p. 1-17. ISSN 1660-4601. Available from: https://dx.doi.org/10.3390/ijerph17103686.
      URL
      Name in Czech: Studie používání přírodního sorbentu ke snížení kationtů železa z vodných roztoků
      RIV/75081431:_____/20:00001925 Article in a journal. English. Switzerland.
      Pandová, Iveta (703 Slovakia, guarantor) -- Rimár, Miroslav (703 Slovakia) -- Panda, Anton (703 Slovakia) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution)
      Keywords in English: zeolite clinoptilolite; ferric cations; wastewater; sorption; adsorption isotherm

      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 18/1/2021 11:36.
    3. SKURIKHINA, O., M. SENNA, M. FABIÁN, R. WITTE, R. TARASENKO, V. TKÁČ, M. ORENDÁČ, M. KAŇUCHOVÁ, V. GIRMAN, E. TÓTHOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Vladimír ŠEPEĽÁK. A sustainable reaction process for phase pure LiFeSi2O6 with goethite as an iron source. Ceramics International. Nizozemsko: Elsevier Ltd, 2020, vol. 46, No 10, p. 14894-14901. ISSN 0272-8842. Available from: https://dx.doi.org/10.1016/j.ceramint.2020.03.016.
      URL
      Name in Czech: Udržitelný reakční proces pro fázově čistý LiFeSi2O6 s goethitem jako zdrojem železa
      RIV/75081431:_____/20:00001762 Article in a journal. English. Netherlands.
      Skurikhina, O. (703 Slovakia, guarantor) -- Senna, M. (392 Japan) -- Fabián, M. (703 Slovakia) -- Witte, R. (276 Germany) -- Tarasenko, R. (703 Slovakia) -- Tkáč, V. (703 Slovakia) -- Orendáč, M. (703 Slovakia) -- Kaňuchová, M. (703 Slovakia) -- Girman, V. (703 Slovakia) -- Tóthová, E. (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Šepeľák, Vladimír (703 Slovakia, belonging to the institution)
      Keywords in English: Goethite; LiFeSi2O6; Mechanochemistry; Mössbauer spectroscopy; Reactivity of solid mixture

      Changed by: Kateřina Nygrýnová, učo 23736. Changed: 8/6/2020 12:33.
    4. MAROUŠEK, Josef, Otakar STRUNECKÝ, Ladislav KOLÁŘ, Marek VOCHOZKA, Marek KOPECKÝ, Anna MAROUŠKOVÁ, Jana BATT, Milos POLIAK, Miloslav SOCH, Petr BARTOŠ, Tomáš KLIEŠTIK, Martin FILIP, Petr KONVALINKA, Jan MOUDRÝ, Jiří PETERKA, Karel SUCHÝ, Tomáš ZOUBEK and Edmond CERA. Advances in nutrient management make it possible to accelerate biogas production and thus improve the economy of food waste processing. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS. Philadelphia: Taylor and Francis Inc., 2020, neuveden, Jun 2020, p. 1-10, 11 pp. ISSN 1556-7036.
      URL
      Name in Czech: Pokrok v hospodaření s živinami umožňuje urychlit produkci bioplynu a tím zlepšit ekonomiku zpracování potravinového odpadu
      Name (in English): Advances in nutrient management make it possible to accelerate biogas production and thus improve the economy of food waste processing
      RIV/75081431:_____/20:00001981 Article in a journal. English. United States of America.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Strunecký, Otakar (703 Slovakia, belonging to the institution) -- Kolář, Ladislav (203 Czech Republic, belonging to the institution) -- Vochozka, Marek (203 Czech Republic, belonging to the institution) -- Kopecký, Marek (203 Czech Republic) -- Maroušková, Anna (268 Georgia, belonging to the institution) -- Batt, Jana (203 Czech Republic) -- Poliak, Milos (703 Slovakia) -- Soch, Miloslav (203 Czech Republic) -- Bartoš, Petr (203 Czech Republic) -- Klieštik, Tomáš (703 Slovakia, belonging to the institution) -- Filip, Martin (203 Czech Republic) -- Konvalinka, Petr (203 Czech Republic) -- Moudrý, Jan (203 Czech Republic) -- Suchý, Karel (203 Czech Republic) -- Zoubek, Tomáš (203 Czech Republic) -- Cera, Edmond (203 Czech Republic)
      Keywords in English: Biogas; anaerobic fermentation; energy recovery; bioeconomy; process management

      Changed by: Mgr. Milada Šanderová, učo 25742. Changed: 14/4/2021 08:07.
    5. MAROUŠEK, Josef, Petr BARTOŠ, Martin FILIP, Ladislav KOLÁŘ, Petr KONVALINA, Anna MAROUŠKOVÁ, Jan MOUDRÝ, Jiří PETERKA, Jiří ŠÁL, Miloslav ŠOCH, Vojtěch STEHEL, Otakar STRUNECKÝ, Karel SUCHÝ, Marek VOCHOZKA, Jaromír VRBKA and Tomáš ZOUBEK. Advances in the agrochemical utilization of fermentation residues reduce the cost of purpose-grown phytomass for biogas production. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. Philadelphia: Taylor & Francis, 2020, Neuveden, March, p. 1 - 11. ISSN 1556-7036.
      URL
      Name in Czech: Pokroky v agrochemickém využití fermentačních zbytků snižují náklady na účelově pěstovanou fytomasu pro výrobu bioplynu
      RIV/75081431:_____/20:00001908 Article in a journal. English. United States of America.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Bartoš, Petr (203 Czech Republic) -- Filip, Martin (203 Czech Republic) -- Kolář, Ladislav (203 Czech Republic, belonging to the institution) -- Konvalina, Petr (203 Czech Republic) -- Maroušková, Anna (268 Georgia, belonging to the institution) -- Moudrý, Jan (203 Czech Republic) -- Peterka, Jiří (203 Czech Republic) -- Šál, Jiří (203 Czech Republic, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution) -- Strunecký, Otakar (703 Slovakia, belonging to the institution) -- Suchý, Karel (203 Czech Republic) -- Vochozka, Marek (203 Czech Republic, belonging to the institution) -- Vrbka, Jaromír (203 Czech Republic, belonging to the institution) -- Zoubek, Tomáš (203 Czech Republic)
      Keywords in English: bioeconomy; Biogas; degree of stability; fermentation residues; soil organic matter; stable organic fraction

      Changed by: Mgr. Milada Šanderová, učo 25742. Changed: 7/4/2021 08:44.
    6. PANDA, Anton, Volodymyr NAHORNYI, Jan VALÍČEK, Marta HARNIČÁROVÁ, Iveta PANDOVÁ, Cristina BORZAN, Samuel CEHELSKÝ, Lukas ANDROVIČ, Hakan TOZAN and Milena KUŠNEROVÁ. Application of cardio-forecasting for evaluation of human—operator performance. International Journal of Environmental Research and Public Health. Švýcarsko: Multidisciplinary Digital Publishing Institute (MDPI), 2020, vol. 17, No 1, p. nestránkováno, 12 pp. ISSN 1661-7827. Available from: https://dx.doi.org/10.3390/ijerph17010326.
      URL
      Name in Czech: Aplikace kardio predikce pro hodnocení výkonu člověka - operátora
      RIV/75081431:_____/20:00001705 Article in a journal. English. Switzerland.
      Panda, Anton (703 Slovakia, guarantor) -- Nahornyi, Volodymyr (804 Ukraine) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Pandová, Iveta (703 Slovakia) -- Borzan, Cristina (642 Romania) -- Cehelský, Samuel (703 Slovakia) -- Androvič, Lukas (703 Slovakia) -- Tozan, Hakan (792 Turkey) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution)
      Keywords in English: Cardiogram; Identification of model parameters; Individual limit of working capacity; Model coefficients; Trend model; Trend of heart rate amplitude

      Changed by: Ing. Anna Palokha, učo 18083. Changed: 23/4/2020 10:46.
    7. KRMELOVÁ, Vladimíra, Ivan KOPAL, Mária GAVENDOVÁ, Ivan LABAJ, Ján KRMELA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Peter HYBLER and Tomáš ZATROCH. A Study of the Effect of the Quinacridone Pigment Content and Storage Time on the Process of Crystallization of Pre-oriented Polypropylene/Quinacridone Fibres. Advanced Structured Materials. Switzerland: Springer, 2020, vol. 124, No 2020, p. 321-336. ISSN 1869-8433. Available from: https://dx.doi.org/10.1007/978-3-030-39062-4_26.
      URL
      Name in Czech: Studie vlivu obsahu chinakridonového pigmentu a doby skladování na proces krystalizace předem orientovaných vláken polypropylenu / chinakridonu
      RIV: Article in a journal. English. Switzerland.
      Krmelová, Vladimíra (703 Slovakia, guarantor) -- Kopal, Ivan (703 Slovakia) -- Gavendová, Mária (703 Slovakia) -- Labaj, Ivan (703 Slovakia) -- Krmela, Ján (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Hybler, Peter (703 Slovakia) -- Zatroch, Tomáš (703 Slovakia)
      Keywords in English: Crystallinity of polymers; Differential scanning kalorimetry; Polypropylene fibres; Quinacridone pigments

      Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:44.
    8. KOPAL, Ivan, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Darina ONDRUŠOVÁ, Ján KRMELA and Peter HYBLER. ATR-FTIR Analysis of Melamine Resin, Phenol-Formaldehyde Resin and Acrylonitrile-Butadiene Rubber Blend Modified by High-Energy Electron Beam Radiation. Advanced Structured Materials. Switzerland: Springer, 2020, vol. 124, No 2020, p. 295-307. ISSN 1869-8433. Available from: https://dx.doi.org/10.1007/978-3-030-39062-4_24.
      URL
      Name in Czech: ATR-FTIR analýza melaminové pryskyřice, fenolformaldehydové pryskyřice a směsi akrylonitril-butadienového kaučuku modifikovaná vysokoenergetickým zářením elektronového paprsku
      RIV: Article in a journal. English. Switzerland.
      Kopal, Ivan (703 Slovakia, guarantor) -- Vršková, Juliána (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Ondrušová, Darina (703 Slovakia) -- Krmela, Ján (703 Slovakia) -- Hybler, Peter (703 Slovakia)
      Keywords in English: unlisted

      Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:45.
    9. CERA, Gentjan, Jaroslav BELAS, Josef MAROUŠEK and Edmond CERA. Do size and age of small and medium-sized enterprises matter in corporate social responsibility? Economics and Sociology. Szcecin: Centre of Sociological Research, 2020, vol. 13, No 2, p. 86-99. ISSN 2071-789X. Available from: https://dx.doi.org/10.14254/2071-789X.2020/13-2/6.
      URL
      Name in Czech: Je ovlivněna společenská odpovědnost podniků velikostí a věkem malých a středních firem?
      RIV/75081431:_____/20:00001982 Article in a journal. English. Poland.
      Cera, Gentjan (8 Albania, guarantor) -- Belas, Jaroslav (203 Czech Republic) -- Maroušek, Josef (203 Czech Republic, belonging to the institution) -- Cera, Edmond (203 Czech Republic)
      Keywords in English: corporate social responsibility; firm size; firm age; Czech Republic; Slovakia

      Changed by: Mgr. Milada Šanderová, učo 25742. Changed: 14/4/2021 08:13.
    10. MITAL'OVA, Zuzana, Dusan MITAL, Frantisek BOTKO, Juliana LITECKA, Jozef ZAJAC, Marta HARNIČÁROVÁ and Jan VALÍČEK. Identification of Topography of Surfaces Created by Turning Biomaterials with Optical Profilometry. BIORESOURCES. Neuveden: NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI, 2020, vol. 15, No 2, p. 2483 - 2494. ISSN 1930-2126. Available from: https://dx.doi.org/10.15376/biores.15.2.2483-2494.
      URL
      Name in Czech: Identifikace topografie povrchů vytvořených soustružením biomateriálů s optickou profilometrií
      RIV/75081431:_____/20:00001937 Article in a journal. English. United States of America.
      Mital'ova, Zuzana (703 Slovakia, guarantor) -- Mital, Dusan (703 Slovakia) -- Botko, Frantisek (703 Slovakia) -- Zajac, Jozef (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution)
      Keywords in English: Natural reinforcement; Wood-plastic composite; Topography of surface

      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 4/2/2021 13:52.
    11. KOPECKÝ, Marek, Jiří PETERKA, Ladislav KOLÁŘ, Petr KONVALINA, Josef MAROUŠEK, Radka VÁCHALOVÁ, Marcel HEROUT, Otakar STRUNECKÝ, Jana BATT and Dang Khoa TRAN. Influence of selected maize cultivation technologies on changes in the labile fraction of soil organic matter sandy-loam cambisol soil structure. Soil and Tillage Research. Amsterdam: Elsevier, 2020, vol. 207, March, p. 1 - 6. ISSN 0167-1987.
      URL
      Name in Czech: Vliv vybraných technologií pěstování kukuřice na změny labilní frakce půdy organické hmoty písčito-hlinitá kambizolová struktura půdy
      RIV/75081431:_____/20:00001913 Article in a journal. English. Netherlands.
      Kopecký, Marek (203 Czech Republic, guarantor) -- Peterka, Jiří (203 Czech Republic) -- Kolář, Ladislav (203 Czech Republic) -- Konvalina, Petr (203 Czech Republic) -- Maroušek, Josef (203 Czech Republic, belonging to the institution) -- Váchalová, Radka (203 Czech Republic) -- Herout, Marcel (203 Czech Republic) -- Strunecký, Otakar (703 Slovakia) -- Batt, Jana (203 Czech Republic) -- Tran, Dang Khoa (203 Czech Republic)
      Keywords in English: Indicators; Labile fractions; Soil organic matter; Soil structure

      Changed by: Mgr. Milada Šanderová, učo 25742. Changed: 7/4/2021 09:07.
    12. KMEC, Ján, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, Roman DANEL and Michal ŘEPKA. Metody řízení a plánování produkčních procesů (Methods of management and planning of production processes). 1.ed. Polsko: Wydavnictwo Sztafeta, 2020, 134 pp. ISBN 978-83-954599-9-3.
      Name (in English): Methods of management and planning of production processes
      RIV/75081431:_____/20:00002253 Book on a specialized topic. English. Poland.
      Kmec, Ján (703 Slovakia, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Danel, Roman (203 Czech Republic, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution)
      Keywords in English: Methods of production management; production processes and production systems; production process planning

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/2/2022 09:35.
    13. KOPAL, Ivan, Juliana VRŠKOVÁ, Alžběta BAKOŠOVÁ, Marta HARNIČÁROVÁ, Ivan LABAJ, Darina ONDRUŠOVÁ, Jan VALÍČEK and Jan KRMELA. Modelling the Stiffness-Temperature Dependence of Resin-Rubber Blends Cured by High-Energy. Polymers. Basel: MDPI, 2020, vol. 12, No 11, p. 1 - 18. ISSN 2073-4360. Available from: https://dx.doi.org/10.3390/polym12112652.
      URL
      Name in Czech: Modelování závislosti tuhosti a teploty směsí pryskyřice a kaučuku vytvrzovaných vysokou energií
      RIV/75081431:_____/20:00001930 Article in a journal. English. Switzerland.
      Kopal, Ivan (703 Slovakia, guarantor) -- Vršková, Juliana (703 Slovakia) -- Bakošová, Alžběta (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Labaj, Ivan (703 Slovakia) -- Ondrušová, Darina (703 Slovakia) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Krmela, Jan (203 Czech Republic)
      Keywords in English: resin-rubber blends; dynamic mechanical analysis; Weibull distribution; genetic algorithm; electron-beam irradiation

      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/1/2021 10:48.
    14. MAROUŠEK, Josef, Ladislav KOLÁŘ, Otakar STRUNECKÝ, Marek KOPECKÝ, Petr BARTOŠ, Anna MAROUŠKOVÁ, Eva CUDLÍNOVÁ, Petr KONVALINA, Miloslav ŠOCH, Jan MOUDRÝ, Radka VANÍČKOVÁ and Jaromír VRBKA. Modified biochars present an economic challenge to phosphate management in wastewater treatment plants. JOURNAL OF CLEANER PRODUCTION. OXFORD, Anglie, VB: ELSEVIER, 2020, 272/2020, nečíslováno, p. nestránkováno, 9 pp. ISSN 0959-6526. Available from: https://dx.doi.org/10.1016/j.jclepro.2020.123015.
      URL
      Name in Czech: Modifikované biouhly představují ekonomickou výzvu pro hospodaření s fosfáty v čistírnách odpadních vod
      RIV/75081431:_____/20:00001854 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Kolář, Ladislav (203 Czech Republic, belonging to the institution) -- Strunecký, Otakar (703 Slovakia, belonging to the institution) -- Kopecký, Marek (203 Czech Republic) -- Bartoš, Petr (203 Czech Republic) -- Maroušková, Anna (268 Georgia, belonging to the institution) -- Cudlínová, Eva (203 Czech Republic) -- Konvalina, Petr (203 Czech Republic) -- Šoch, Miloslav (203 Czech Republic) -- Moudrý, Jan (203 Czech Republic) -- Vaníčková, Radka (203 Czech Republic, belonging to the institution) -- Vrbka, Jaromír (203 Czech Republic, belonging to the institution)
      Keywords in English: Phosphorus recovery; Biochar; Sorption; Bioeconomy; Wastewater

      Changed by: Kateřina Nygrýnová, učo 23736. Changed: 15/12/2020 14:57.
    15. RECE, Laurentiu, Virgil FLORESCU, Arina MODREA, Victor JEFLEA, Marta HARNIČÁROVÁ, Jan VALÍČEK and Marian BORZAN. Optimization of the 2 1/2 d processing method of complex parts, through a predictive algorithm for controlling the geometric shape deviations resulting from processing. Mathematics. BASEL, SWITZERLAND: MDPI, 2020, vol. 8, No 1, p. nestránkováno, 24 pp. ISSN 2227-7390. Available from: https://dx.doi.org/10.3390/math8010059.
      URL
      Name in Czech: Optimalizace metody zpracování 2 1/2 d složitých dílů pomocí prediktivního algoritmu pro řízení odchylek geometrických tvarů vyplývajících ze zpracování
      RIV/75081431:_____/20:00001712 Article in a journal. English. Switzerland.
      Rece, Laurentiu (642 Romania, guarantor) -- Florescu, Virgil (642 Romania) -- Modrea, Arina (642 Romania) -- Jeflea, Victor (642 Romania) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Borzan, Marian (642 Romania)
      Keywords in English: Control of the deviations of geometric forms; Manufacturing in 2 1/2 D; Manufacturing of complex surfaces; Mathematical model Mathematics; Numerical control; Optimal manufacturing

      Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:44.
    16. BELÁS, Jaroslav, Khuramm Ajaz KHAN, Josef MAROUŠEK and Zoltán ROZSA. Perceptions of the importance of business ethics in SMEs: A comparative study of Czech and Slovak entrepreneurs. Ethics and Bioethics. Sciendo, 2020, vol. 10, 1-2, p. 96-106. ISSN 1338-5615. Available from: https://dx.doi.org/10.2478/ebce-2020-0010.
      URL
      Name in Czech: Vnímání významu podnikatelské etiky v malých a středních podnicích: Srovnávací studie českých a slovenských podnikatelů
      RIV/75081431:_____/20:00001901 Article in a journal. English. Germany.
      Belás, Jaroslav (203 Czech Republic, guarantor) -- Maroušek, Josef (203 Czech Republic, belonging to the institution)
      Keywords in English: Business ethics; Czech Republic; Slovakia; Small and medium-sized enterprises

      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 19/1/2021 13:01.
    17. HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Ivan KOPAL, Júlia LITECKÁ, Milan KADNÁR, Ján KMEC and Zuzana PALKOVÁ. Prediction of shortening and material grain size after extrusion using the ecap method. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020, vol. 400, No 2020, p. 91-105. ISSN 1012-0386. Available from: https://dx.doi.org/10.4028/www.scientific.net/DDF.400.91.
      URL
      Name in Czech: Predikce zkrácení a velikosti zrna materiálu po vytlačování metodou ecap
      RIV/75081431:_____/20:00001738 Article in a journal. English. Switzerland.
      Harničárová, Marta (203 Czech Republic, guarantor, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Kopal, Ivan (703 Slovakia) -- Litecká, Júlia (703 Slovakia) -- Kadnár, Milan (703 Slovakia) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
      Keywords in English: ECAP method; grain size; surface roughness; structure

      Changed by: Ing. Anna Palokha, učo 18083. Changed: 14/5/2020 14:36.
    18. KMEC, Ján, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, Roman DANEL and Michal ŘEPKA. Progresivní technologie produkčních procesů (Progressive technology of production processes). 1st ed. Polsko: Wydavnictwo Sztafeta, 2020, 309 pp. ISBN 978-83-66528-00-0.
      Name (in English): Progressive technology of production processes
      RIV/75081431:_____/20:00002252 Book on a specialized topic. Czech. Poland.
      Kmec, Ján (703 Slovakia, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Danel, Roman (203 Czech Republic, belonging to the institution) -- Řepka, Michal (203 Czech Republic, belonging to the institution)
      Keywords in English: production process; progressive technologies; mechanical; chemical; electrochemical; electrothermal; energy-current; hydroerosive; rapid prototyping; sodering; innovative processes

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/2/2022 09:21.
    19. VALÍČEK, Jan, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, M. ŠAJGALÍK, Ján KMEC, I. KOPAL, A. PANDA and Zuzana PALKOVÁ. Reverse reconstruction of surface topography from residual stress after chip-forming machining of the material. Materialwissenschaft und Werkstofftechnik. Německo: Wiley-VCH Verlag, 2020, vol. 51, No 5, p. 579-585. ISSN 0933-5137. Available from: https://dx.doi.org/10.1002/mawe.202000017.
      URL
      Name in Czech: Reverzní rekonstrukce povrchové topografie ze zbytkového napětí po třískovém obrábění materiálu
      RIV/75081431:_____/20:00001756 Article in a journal. English. Germany.
      Valíček, Jan (203 Czech Republic, guarantor, belonging to the institution) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Šajgalík, M. (703 Slovakia) -- Kmec, Ján (203 Czech Republic, belonging to the institution) -- Kopal, I. (703 Slovakia) -- Panda, A. (703 Slovakia) -- Palková, Zuzana (703 Slovakia, belonging to the institution)
      Keywords in English: Residual stress; surface roughness; chip-forming machining; deformation; mechanical properties

      Changed by: Kateřina Nygrýnová, učo 23736. Changed: 5/6/2020 08:20.
    20. MAROUŠEK, Josef, Petr BARTOŠ, Anna MAROUŠKOVÁ, Vojtěch STEHEL and Otakar STRUNECKÝ. Shock Waves for Enhancing Extraction Yield. In Knoerzer, K., Muthukumarappan, K. (Eds.). Innovative Food Processing Technologies: A Comprehensive Review. vol. 3. neuveden: Elsevier, 2020, p. 439-443. ISBN 978-0-12-815781-7.
      URL
      RIV/75081431:_____/20:00002089 Chapter(s) of a specialized book. English.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Maroušková, Anna (203 Czech Republic, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution) -- Strunecký, Otakar (703 Slovakia, belonging to the institution)
      Keywords in English: shock waves; vegetable oil; oil extraction; biorefining

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 24/6/2021 12:34.
    21. MAROUŠEK, Josef, Anna MAROUŠKOVÁ and Tomáš KŮS. Shower cooler reduces pollutants release in production of competitive cement substitute at low cost. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. Philadelphia: Taylor & Francis, 2020, Neuveden, September, p. 1 - 10. ISSN 1556-7036.
      URL
      Name in Czech: Sprchový chladič snižuje uvolňování znečišťujících látek při výrobě konkurenceschopné náhražky cementu při nízkých nákladech
      RIV/75081431:_____/20:00001906 Article in a journal. English. United States of America.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Maroušková, Anna (203 Czech Republic, belonging to the institution) -- Kůs, Tomáš (203 Czech Republic, belonging to the institution)
      Keywords in English: bioeconomy; Corporate social responsibility; fermentation residues; particulate matterpyrolysis

      Changed by: Mgr. Milada Šanderová, učo 25742. Changed: 7/4/2021 08:50.
    22. MAROUŠEK, Josef, Zuzana ROWLAND, Katarína VALÁŠKOVÁ and Pavol KRÁL. Techno-economic assessment of potato waste management in developing economies. Clean Technologies and Environmental Policy. New York, USA: Springer, 2020, vol. 22, březen, p. 937-944. ISSN 1618-954X. Available from: https://dx.doi.org/10.1007/s10098-020-01835-w.
      URL
      Name in Czech: Techno-ekonomické hodnocení nakládání s bramborovým odpadem v rozvojových ekonomikách
      RIV/75081431:_____/20:00001753 Article in a journal. English. United States of America.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Rowland, Zuzana (203 Czech Republic, belonging to the institution) -- Valášková, Katarína (703 Slovakia) -- Král, Pavol (703 Slovakia)
      Keywords in English: biowaste management; techno-economic assessment; bioeconomy; potato; sustainability

      Changed by: Kateřina Nygrýnová, učo 23736. Changed: 4/6/2020 11:02.
    23. VOCHOZKA, Marek, Zuzana ROWLAND, Petr ŠULEŘ and Josef MAROUŠEK. The influence of the international price of oil on the value of the EUR/USD exchange rate. Journal of Competitiveness. Zlín, Czech Republic: Tomáš Baťa University, 2020, vol. 12, No 2, p. 167-190. ISSN 1804-171X.
      URL
      Name in Czech: Vliv mezinárodní ceny ropy na hodnotu směnného kurzu EUR / USD
      RIV/75081431:_____/20:00001790 Article in a journal. English. Czech Republic.
      Vochozka, Marek (203 Czech Republic, guarantor, belonging to the institution) -- Rowland, Zuzana (203 Czech Republic, belonging to the institution) -- Šuleř, Petr (203 Czech Republic, belonging to the institution) -- Maroušek, Josef (203 Czech Republic, belonging to the institution)
      Keywords in English: exchange rate; artificial neural networks; time series; competitiveness

      Changed by: Kateřina Nygrýnová, učo 23736. Changed: 18/8/2020 15:27.
    24. KMEC, Ján, M. GOMBÁR, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, J. KŘÍŽ, M. KADNÁR, Monika KARKOVÁ and A. VAGASKÁ. The predictive model of surface texture generated by abrasivewater jet for austenitic steels. Applied Sciences (Switzerland). Switzerland: MDPI AG, 2020, vol. 10, No 9, p. nestránkováno, 22 pp. ISSN 2076-3417. Available from: https://dx.doi.org/10.3390/app10093159.
      URL
      Name in Czech: Prediktivní model povrchové textury vytvořený abrazivním vodním paprskem pro austenitické oceli
      RIV/75081431:_____/20:00001769 Article in a journal. English. Switzerland.
      Kmec, Ján (703 Slovakia, guarantor, belonging to the institution) -- Gombár, M. (703 Slovakia) -- Harničárová, Marta (203 Czech Republic, belonging to the institution) -- Valíček, Jan (203 Czech Republic, belonging to the institution) -- Kušnerová, Milena (203 Czech Republic, belonging to the institution) -- Kříž, J. (203 Czech Republic) -- Kadnár, M. (703 Slovakia) -- Karková, Monika (703 Slovakia, belonging to the institution) -- Vagaská, A. (703 Slovakia)
      Keywords in English: Abrasive mass flow; Abrasive nozzle diameter; Abrasive water jet; Cutting head feed rate; High-pressure water flow; Material thickness; Stainless steel; Surface roughness

      Changed by: Kateřina Nygrýnová, učo 23736. Changed: 16/6/2020 12:54.
    25. MAROUŠEK, Josef, Vojtěch STEHEL, Marek VOCHOZKA, Anna MAROUŠKOVÁ, Otakar STRUNECKÝ and Ladislav KOLÁŘ. Způsob regenerace fosforu z odpadní vody, zejména z kalové vody (Method of regenerating phosphorus from wastewater, especially from sludge water). 2020.
      Name (in English): Method of regenerating phosphorus from wastewater, especially from sludge water
      RIV/75081431:_____/20:00002680 Patent. Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution) -- Vochozka, Marek (203 Czech Republic, belonging to the institution) -- Maroušková, Anna (203 Czech Republic, belonging to the institution) -- Strunecký, Otakar (703 Slovakia, belonging to the institution) -- Kolář, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: biochar; wastewater; regenerating phosphorus

      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 26/3/2024 08:47.

    2019

    1. MAROUŠEK, Josef, Otakar STRUNECKÝ and Vojtěch STEHEL. Biochar farming: defining economically perspective applications. Clean Technologies and Environmental Policy. Berlin, Německo: Springer Verlag, 2019, vol. 21, No 7, p. 1389-1395. ISSN 1618-954X. Available from: https://dx.doi.org/10.1007/s10098-019-01728-7.
      URL
      Name in Czech: Zemědělství s biocharty: definování ekonomicky perspektivních aplikací
      RIV/75081431:_____/19:00001615 Article in a journal. English. Germany.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Strunecký, Otakar (703 Slovakia, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution)
      Keywords in English: Biochar; Soil; Economy; Nutrients; Process management

      Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 15:01.
    2. MAROUŠEK, Josef, Vojtěch STEHEL, Marek VOCHOZKA, Ladislav KOLÁŘ, Anna MAROUŠKOVÁ, Otakar STRUNECKÝ, Jiří PETERKA, Marek KOPECKÝ and Sowmya SHREEDHAR. Ferrous sludge from water clarification: Changes in waste management practices advisable. Journal of Cleaner Production. England: Elsevier Ltd, 2019, vol. 218, 01.05.2019, p. 459-464. ISSN 0959-6526. Available from: https://dx.doi.org/10.1016/j.jclepro.2019.02.037.
      URL
      Name in Czech: Železný kal z čištění vody: Doporučujeme změny v postupech nakládání s odpady
      RIV/75081431:_____/19:00001652 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution) -- Vochozka, Marek (203 Czech Republic, belonging to the institution) -- Kolář, Ladislav (203 Czech Republic, belonging to the institution) -- Maroušková, Anna (268 Georgia, belonging to the institution) -- Strunecký, Otakar (703 Slovakia, belonging to the institution) -- Peterka, Jiří (203 Czech Republic) -- Kopecký, Marek (203 Czech Republic) -- Shreedhar, Sowmya (356 India, belonging to the institution)
      Keywords in English: Bioeconomy; Coagulation sludge; Flocculation; Phosphorus bioavailability; Process management; Water clarification

      Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 15:10.

    2018

    1. MAROUŠEK, Josef, Vojtěch STEHEL, Marek VOCHOZKA, Anna MAROUŠKOVÁ and Ladislav KOLÁŘ. Biochar reduces nitrate level in red beet. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH. Germany: Springer-Verlag GmbH Germany, part of Springer Nature 2018, 2018, vol. 25, No 18, p. 18200-18203. ISSN 1614-7499.
      Name in Czech: Biochar redukuje hladinu dusičnanů v červené řepě
      RIV/75081431:_____/18:00001346 Article in a journal. English. Germany.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution) -- Vochozka, Marek (203 Czech Republic, belonging to the institution) -- Maroušková, Anna (268 Georgia, belonging to the institution) -- Kolář, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: Biochar; Nitrate levels; Nitrates; Production management; Red beet

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 17/12/2018 09:07.
    2. MAROUŠEK, Josef, Vojtěch STEHEL, Anna MAROUŠKOVÁ, Marek VOCHOZKA and Jiří ŠÁL. Lehčená betonová směs (Lightweight concrete mix). 2018.
      Name (in English): Lightweight concrete mix
      RIV: Legally protected outcomes. Czech. Czech Republic.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution) -- Maroušková, Anna (268 Georgia, belonging to the institution) -- Vochozka, Marek (203 Czech Republic, belonging to the institution) -- Šál, Jiří (203 Czech Republic, belonging to the institution)
      Keywords in English: concrete mix; construction; pyrolysis powder

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 12/4/2018 11:36.
    3. MAROUŠEK, Josef, Vojtěch STEHEL, Marek VOCHOZKA, Anna MAROUŠKOVÁ and Ladislav KOLÁŘ. Postponing of the intracellular disintegration step improves efficiency of phytomass processing. Journal of Cleaner Production. Anglie: ELSEVIER SCI LTD, 2018, vol. 39, No 31, p. 173-176. ISSN 0959-6526.
      Name in Czech: Odložení intracelulárního kroku dezintegrace zlepšuje účinnost zpracování fytomasy
      RIV/75081431:_____/18:00001345 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution) -- Vochozka, Marek (203 Czech Republic, belonging to the institution) -- Maroušková, Anna (268 Georgia, belonging to the institution) -- Kolář, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: Technology management; Process optimisation; Phytomass disintegration; Techno-economic assessment

      Changed by: Mgr. Eva Hynešová, učo 23116. Changed: 13/12/2018 09:54.
    4. MAROUŠEK, Josef, Vojtěch STEHEL, Anna MAROUŠKOVÁ, Marek VOCHOZKA, Jiří ŠÁL and Jaroslav ŽÁK. Povrchová úprava interiéru pro zlepšení kvality vzduchu a dalších parametrů uvnitř objektu (Interior finishes to improve air quality and other parameters inside the building). 2018.
      Name (in English): Interior finishes to improve air quality and other parameters inside the building
      RIV: Legally protected outcomes. Czech. Czech Republic.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution) -- Maroušková, Anna (268 Georgia, belonging to the institution) -- Vochozka, Marek (203 Czech Republic, belonging to the institution) -- Šál, Jiří (203 Czech Republic, belonging to the institution) -- Žák, Jaroslav (203 Czech Republic, belonging to the institution)
      Keywords in English: Interior; Surface finish; biouhel; construction

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 12/4/2018 11:29.

    2017

    1. NÝVLT, Vladimír and Kristýna PRUŠKOVÁ. Building Information Management as a Tool for Managing Knowledge throughout whole Building Life Cycle. Online. In Marschalko M.,Drusa M.,Rybak J.,Yilmaz I.,Segalini A.,Coisson E. IOP Conference Series: Materials Science and Engineering. 1. vyd. Spojené království: Institute of Physics Publishing, 2017, p. nestránkováno, 7 pp. ISSN 1757-8981.
      Name in Czech: Řízení informačních budov jako nástroj pro správu znalostí v celém životním cyklu budovy
      RIV/75081431:_____/17:00001166 Proceedings paper. Civil engineering. English. United Kingdom of Great Britain and Northern Ireland.
      Nývlt, Vladimír (203 Czech Republic, guarantor, belonging to the institution) -- Prušková, Kristýna (203 Czech Republic, belonging to the institution)
      Keywords in English: BIM; building information management; tool for managing; building life cycle
      Type of proceedings: post-proceedings

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 19/12/2017 09:06.
    2. PRUŠKOVÁ, Kristýna and Vladimír NÝVLT. Issue of Building Information Modelling Implementation into the Czech Republic's Legislation using the Level of Development. Online. In IOP Conference Series: Materials Science and Engineering, Volume 245, Issue 2 (World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2017). 1. vyd. Spojené království: Institute of Physics Publishing, 2017, p. nestránkováno, 7 pp. ISSN 1757-8981.
      Name in Czech: Vydání implementace modelování stavebních informací do legislativy České republiky s využitím úrovně vývoje
      RIV/75081431:_____/17:00001163 Proceedings paper. Civil engineering. English. United Kingdom of Great Britain and Northern Ireland.
      Prušková, Kristýna (203 Czech Republic, guarantor, belonging to the institution) -- Nývlt, Vladimír (203 Czech Republic, belonging to the institution)
      Keywords in English: BIM; building information modelling; implemantation; legislation using
      Type of proceedings: post-proceedings

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 14/12/2017 15:28.
    3. VÁCHALOVÁ, Radka, Josef MAROUŠEK, Ladislav KOLÁŘ, Jiří PETERKA, Marek KOPECKÝ, Zbyněk HAVELKA, Petra PÁRTLOVÁ and Jan VÁCHAL. NITRATES IN BEETROOT AND SODIUM FERTILIZATION. LISTY CUKROVARNICKÉ a ŘEPAŘSKÉ. Praha: LISTY CUKROVARNICKE REPARSKE, V U C PRAHA, A.S., 2017, vol. 133, No 12, p. 386-388. ISSN 1210-3306.
      Name in Czech: Nitráty v červené řepě a hnojení sodíkem
      RIV/75081431:_____/17:00001228 Article in a journal. English. Czech Republic.
      Váchalová, Radka (203 Czech Republic, guarantor) -- Maroušek, Josef (203 Czech Republic, belonging to the institution) -- Kolář, Ladislav (203 Czech Republic) -- Peterka, Jiří (203 Czech Republic) -- Kopecký, Marek (203 Czech Republic) -- Havelka, Zbyněk (203 Czech Republic) -- Pártlová, Petra (203 Czech Republic) -- Váchal, Jan (203 Czech Republic)
      Keywords in English: beetroot; sodium fertilization; NO3- reduction; water-air soil regime

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 5/4/2018 10:11.
    4. MAROUŠEK, Josef, Ladislav KOLÁŘ, Marek VOCHOZKA, Vojtěch STEHEL and Anna MAROUŠKOVÁ. Novel method for cultivating beetroot reduces nitrate content. Journal of Cleaner Production. Anglie: ELSEVIER SCI LTD, 2017, vol. 168, 25. August 2017, p. 60-62. ISSN 0959-6526. Available from: https://dx.doi.org/10.1016/j.jclepro.2017.08.233.
      Name in Czech: Nová metoda pro pěstování červené řepy snižuje obsah dusičnanů
      RIV/75081431:_____/17:00001170 Article in a journal. Botany. English. United Kingdom of Great Britain and Northern Ireland.
      Maroušek, Josef (203 Czech Republic, guarantor, belonging to the institution) -- Kolář, Ladislav (203 Czech Republic, belonging to the institution) -- Vochozka, Marek (203 Czech Republic, belonging to the institution) -- Stehel, Vojtěch (203 Czech Republic, belonging to the institution) -- Maroušková, Anna (268 Georgia, belonging to the institution)
      Keywords in English: Nutrient management; Bioactive substances; Nitrate content; Sodium; Production economics

      Changed by: Mgr. Eva Hynešová, učo 23116. Changed: 12/3/2018 15:15.
    5. PRUŠKOVÁ, Kristýna. The mutual relations between level of development and project documentation stages in Czech Republic’s legislation. In 17th International Multidisciplinary Scientific Geoconference SGEM 2017, Conference proceedings, Volume 17, Nano, bio and green - technologies for sustainable future Issue 62. 1.vyd. Sofia: STEF92 Technology Ltd., 2017, p. 821-826. ISBN 978-619-7408-13-3.
      Name in Czech: Vzájemné vztahy mezi úrovní vývoje a stupni projektové dokumentace v České republice
      RIV/75081431:_____/17:00001127 Proceedings paper. Structural engineering. English. Bulgaria.
      Prušková, Kristýna (203 Czech Republic, guarantor, belonging to the institution)
      Keywords in English: level of development; project documentation stages; legislation; implementation; building information management

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 20/4/2018 11:20.
    6. KARKOVÁ, Monika, Ján MAJERNÍK, Ján KMEC and Kristýna PRUŠKOVÁ. Use of the water within the waterjet technology. In 17th internatonal multidisciplinary scienctific geoconference SGEM2017. 1st ed. Sofia (Bulharsko): STEF92 Technology, 2017, p. 285-292. ISBN 978-619-7408-06-5.
      Name in Czech: Použití vody v technologii vodního paprsku
      RIV/75081431:_____/17:00001174 Proceedings paper. Other machinery industry. English. Bulgaria.
      Karková, Monika (703 Slovakia, guarantor, belonging to the institution) -- Majerník, Ján (703 Slovakia, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Prušková, Kristýna (203 Czech Republic, belonging to the institution)
      Keywords in English: water jet; recyclation; water
      Type of proceedings: post-proceedings

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 20/12/2017 12:48.

    2016

    1. KUČERKA, Daniel, Ondrej STOPKA, Ján KMEC, Monika KARKOVÁ, Miroslav GOMBÁR, Jiří MÍKA, Petr HRUBÝ and Viktorie WEISS. Assessing the Relationship of Mineability of Rocks and Machines for Earthwork. Online. In M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, A. Segalini. World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016 (WMCAUS 2016). Netherlands: Elsevier Ltd., 2016, p. 368-373. ISSN 1877-7058.
      Name in Czech: Posouzení vztahu těžebních možností hornin a strojů v rámci zemních prací
      RIV/75081431:_____/16:00000899 Proceedings paper. Machinery and tools. English. Netherlands.
      Kučerka, Daniel (703 Slovakia, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Karková, Monika (703 Slovakia, belonging to the institution) -- Gombár, Miroslav (703 Slovakia, belonging to the institution) -- Míka, Jiří (203 Czech Republic, belonging to the institution) -- Hrubý, Petr (203 Czech Republic, belonging to the institution) -- Weiss, Viktorie (203 Czech Republic, belonging to the institution)
      Keywords in English: breakage resistance of rocks; earthwork; excavation; machinery mechanisms
      Type of proceedings: post-proceedings

      Changed by: Hana Dlouhá, učo 19800. Changed: 4/1/2017 11:24.
    2. STOPKA, Ondrej, Rudolf KAMPF and Ján VRÁBEL. Deploying the Means of Transport within the Transport Enterprises in the Context of Emission Standards. In Transport Means 2016. Neuveden: KAUNAS UNIVERSITY OF TECHNOLOGY PRESS, 2016, p. 185-189. ISSN 1822-296X.
      Name in Czech: Nasazování dopravních prostředků v rámci dopravních podniků v kontextu emisních standardů
      RIV/75081431:_____/16:00001463 Proceedings paper. Land transport systems and equipment. English. Lithuania.
      Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Kampf, Rudolf (203 Czech Republic, belonging to the institution) -- Vrábel, Ján (703 Slovakia)
      Keywords in English: deploying; mean of transport; transport enterprise; emission standard; comparative evaluation
      Type of proceedings: post-proceedings

      Changed by: Hana Dlouhá, učo 19800. Changed: 4/7/2017 16:16.
    3. STOPKA, Ondrej and Rudolf KAMPF. DETERMINING THE MOST SUITABLE LAYOUT OF SPACE FOR THE LOADING UNITS’ HANDLING IN THE MARITIME PORT. Transport. Vilnius: Vilnius Gediminas Technical University, 2016, vol. 33, No 1, p. 280-290. ISSN 1648-4142.
      Name in Czech: Stanovení nejvhodnějšího rozvržení prostoru pro manipulaci s přepravními jednotkami v přístavu námořní dopravy
      RIV/75081431:_____/16:00001052 Article in a journal. Theory and management systems. English. Lithuania.
      Stopka, Ondrej (703 Slovakia, guarantor, belonging to the institution) -- Kampf, Rudolf (203 Czech Republic, belonging to the institution)
      Keywords in English: maritime port; logistics; loading unit; handling; warehousing; AHP method

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 16/4/2018 15:11.
    4. MUSÍLEK, Josef, Petr HRUBÝ and Ondrej STOPKA. Diversity of Characteristics of Sandy Soils in Relation to Foundation Engineering (Rozmanitost charakteristik písčitých půd ve vztahu k zakládání staveb). Online. In Yilmaz I. IOP Conference Series: Earth and Environmental Science. [Bristol]: Institute of Physics Publishing, 2016, p. 1-4. ISSN 1755-1315.
      Name (in English): Rozmanitost charakteristik písčitých půd ve vztahu k zakládání staveb
      RIV/75081431:_____/16:00001005 Proceedings paper. Civil engineering. English. United Kingdom of Great Britain and Northern Ireland.
      Musílek, Josef (203 Czech Republic, belonging to the institution) -- Hrubý, Petr (203 Czech Republic, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution)
      Keywords in English: bearing capacity; sand; fine-grained soils; foundation engineering
      Type of proceedings: post-proceedings

      Changed by: Hana Dlouhá, učo 19800. Changed: 19/4/2017 14:34.
    5. LIŽBETIN, Ján, Ondrej STOPKA and Vladislav ZITRICKÝ. Dopravní prostředky (Transport Means). 1. vydání. České Budějovice: Vysoká škola technická a ekonomická v Českých Budějovicích, 2016, 155 pp. ISBN 978-80-7468-101-1.
      Name (in English): Transport Means
      RIV/75081431:_____/16:00000905 Textbook. Land transport systems and equipment. Czech. Czech Republic.
      Ližbetin, Ján (703 Slovakia, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Zitrický, Vladislav (703 Slovakia)
      Keywords in English: transport; transport means

      Changed by: Hana Dlouhá, učo 19800. Changed: 15/2/2017 14:19.
    6. STOPKA, Ondrej, Ján PONICKÝ, Mária CHOVANCOVÁ and Vladislav ZITRICKÝ. Draft Method for Determining the Number of Checking Devices Utilized within the Regional Passenger Transport. Nase More. Dubrovnik: University of Dubrovnik, 2016, vol. 63, No 3, p. 200-203. ISSN 0469-6255.
      Name in Czech: Návrh metody pro stanovení počtu odbavovacích zařízení využíváných v rámci regionální osobní dopravy
      RIV/75081431:_____/16:00000725 Article in a journal. Municipal, regional and transportation planning. English. Croatia.
      Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Ponický, Ján (703 Slovakia) -- Chovancová, Mária (703 Slovakia) -- Zitrický, Vladislav (703 Slovakia)
      Keywords in English: passengers checking method; checking device; regional railway transport; passengers’ transportation

      Changed by: Hana Dlouhá, učo 19800. Changed: 2/9/2016 10:42.
    7. VONDRÁČKOVÁ, Terezie, Ján KMEC, Jiří ČEJKA, Ladislav BARTUŠKA and Ondrej STOPKA. Evaluation of the Parameters Affecting the Cohesion of Fine Grained Soil (Vyhodnocení parametrů, které ovlivňují soudržnost jemnozrnných půd). Online. In Yilmaz I. IOP Conference Series: Earth and Environmental Science. neuveden: IOP Publishing Ltd., 2016, p. 1-4, 5 pp. ISSN 1755-1307.
      Name (in English): Vyhodnocení parametrů, které ovlivňují soudržnost jemnozrnných půd
      RIV/75081431:_____/16:00001003 Proceedings paper. Civil engineering. English. Czech Republic.
      Vondráčková, Terezie (203 Czech Republic, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Čejka, Jiří (203 Czech Republic, belonging to the institution) -- Bartuška, Ladislav (203 Czech Republic, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution)
      Keywords in English: total cohesion; effective cohesion; fine-grained soil; subsoil
      Type of proceedings: post-proceedings

      Changed by: Hana Dlouhá, učo 19800. Changed: 13/4/2017 11:17.
    8. STOPKA, Ondrej, Daniel KUČERKA, Rudolf KAMPF, Ján LIŽBETIN, Ladislav BARTUŠKA, Ján KMEC, Miroslav GOMBÁR and Viktorie WEISS. Heavy Machinery Required for the Proper Application of Geosynthetic Products in the Implementation of Transport Constructions. Online. In M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, A. Segalini. World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016 (WMCAUS 2016). Netherlands: Elsevier Ltd., 2016, p. 445-449. ISSN 1877-7058.
      Name in Czech: Těžké stroje nevyhnutné pro správnou aplikaci geosyntetických výrobků při realizaci dopravních staveb
      RIV/75081431:_____/16:00000900 Proceedings paper. Land transport systems and equipment. English. Netherlands.
      Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Kučerka, Daniel (703 Slovakia, belonging to the institution) -- Kampf, Rudolf (203 Czech Republic, belonging to the institution) -- Ližbetin, Ján (703 Slovakia, belonging to the institution) -- Bartuška, Ladislav (203 Czech Republic, belonging to the institution) -- Kmec, Ján (703 Slovakia, belonging to the institution) -- Gombár, Miroslav (703 Slovakia, belonging to the institution) -- Weiss, Viktorie (203 Czech Republic, belonging to the institution)
      Keywords in English: compaction; geosynthetic material; heavy machinery; transport constructions
      Type of proceedings: post-proceedings

      Changed by: Hana Dlouhá, učo 19800. Changed: 4/1/2017 11:25.
    9. KAMPF, Rudolf, Ondrej STOPKA, Iveta KUBASAKOVA and Vladimír ZITRICKÝ. Macroeconomic Evaluation of Projects Regarding the Traffic Constructions and Equipment. Online. In M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, A. Segalini. World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016 (WMCAUS 2016). Netherlands: Elsevier Ltd., 2016, p. 1538-1544. ISSN 1877-7058.
      Name in Czech: Makroekonomické hodnocení projektů týkajících se dopravních staveb a zařízení
      RIV/75081431:_____/16:00000898 Proceedings paper. Municipal, regional and transportation planning. English. Netherlands.
      Kampf, Rudolf (203 Czech Republic, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Kubasakova, Iveta (703 Slovakia) -- Zitrický, Vladimír (703 Slovakia)
      Keywords in English: macroeconomic evaluation; methodological comparison; traffic construction; traffic equipment
      Type of proceedings: post-proceedings

      Changed by: Hana Dlouhá, učo 19800. Changed: 4/1/2017 11:13.
    10. VRÁBEL, Ján, Ondrej STOPKA, Vladimír RIEVAJ, Branislav ŠARKAN, Kristýna PRUŠKOVÁ and Michalk PHILIP. Measuring the Resistance of Tires for Passenger Vehicle against the rolling and sliding on Loading Area of the Flatbet Truck when providing the Transport Services. Communications : scientific letters of the University of Žilina. Žilina: The University of Žilina, 2016, Volume 18, No 2, p. 124-128. ISSN 1335-4205.
      Name in Czech: Měření odporu pneumatik osobního vozidla proti pojíždění a posouvání na ložné ploše valníkového nákladního vozidla při poskytování dopravních služeb
      RIV/75081431:_____/16:00000694 Article in a journal. Land transport systems and equipment. English. Slovakia.
      Vrábel, Ján (703 Slovakia) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Rievaj, Vladimír (703 Slovakia) -- Šarkan, Branislav (703 Slovakia) -- Prušková, Kristýna (203 Czech Republic, belonging to the institution) -- Philip, Michalk (276 Germany)
      Keywords in English: Mechanical resistances of the vehicle; fixing; securing; loading area; sliding friction; dynamic coefficient of the sliding friction
      Reviewed: yes

      Changed by: Věra Kostková, učo 6173. Changed: 29/8/2016 11:03.
    11. LIŽBETIN, Ján, Ondrej STOPKA and František NĚMEC. Methodological Assessment of Environmental Indicators in Combined Transport in Comparison with Direct Road Freight Transport. In Transport Means 2016. KAUNAS, LITHUANIA: KAUNAS UNIVERSITY OF TECHNOLOGY PRESS, 2016, p. 151-155. ISSN 1822-296X.
      Name in Czech: Metodologické posouzení environmentálních ukazatelů v kombinované dopravě ve srovnání s přímou silniční nákladní dopravo
      RIV/75081431:_____/16:00001086 Proceedings paper. Land transport systems and equipment. English. Lithuania.
      Ližbetin, Ján (703 Slovakia, guarantor, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Němec, František (203 Czech Republic, belonging to the institution)
      Keywords in English: environmental indicators; emissions; energy; road transport; combined transport
      Type of proceedings: post-proceedings

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 5/10/2017 10:09.
    12. STOPKA, Ondrej, Lenka ČERNÁ and Vladislav ZITRICKÝ. Methodology for Measuring the Customer Satisfaction with the Logistics Services. Nase More. Dubrovnik: University of Dubrovnik, 2016, vol. 63, No 3, p. 189-194. ISSN 0469-6255.
      Name in Czech: Metodika pro měření spokojenosti zákazníků s logistickými službami
      RIV/75081431:_____/16:00000727 Article in a journal. Theory and management systems. English. Croatia.
      Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Černá, Lenka (703 Slovakia) -- Zitrický, Vladislav (703 Slovakia)
      Keywords in English: logistics; customer; methodology; criteria; evaluation; measuring

      Changed by: Hana Dlouhá, učo 19800. Changed: 2/9/2016 10:48.
    13. LIŽBETIN, Ján and Ondrej STOPKA. PRACTICAL APPLICATION OF THE METHODOLOGY FOR DETERMINING THE PERFORMANCE OF A COMBINED TRANSPORT TERMINAL. Online. In Neuveden. PROCEEDINGS OF THE THIRD INTERNATIONAL CONFERENCE ON TRAFFIC AND TRANSPORT ENGINEERING (ICTTE). BELGRADE, SERBIA: SCIENTIFIC RESEARCH CENTER LTD BELGRADE, 2016, p. 382-387. ISBN 978-86-916153-3-8.
      Name in Czech: Praktická aplikace metodiky stanovení výkonnosti terminálu kombinované dopravy
      RIV/75081431:_____/16:00001465 Proceedings paper. Land transport systems and equipment. English. Serbia.
      Ližbetin, Ján (703 Slovakia, guarantor, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution)
      Keywords in English: combined transport terminals; handling equipment; optimization; storage; reloading; intermodal transport
      Type of proceedings: post-proceedings

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 11/1/2018 09:06.
    14. STOPKA, Ondrej, Mária CHOVANCOVÁ, Ján LIŽBETIN and Vladimír KLAPITA. Proposal for Optimization of the Inventory Level Using the Appropriate Method for its Procurement. Nase More. Dubrovnik: University of Dubrovnik, 2016, vol. 63, No 3, p. 195-199. ISSN 0469-6255.
      Name in Czech: Návrh pro optimalizaci úrovně zásob pomocí příslušné metody pro pro jejich obstarávání
      RIV/75081431:_____/16:00000726 Article in a journal. Theory and management systems. English. Croatia.
      Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Chovancová, Mária (703 Slovakia) -- Ližbetin, Ján (703 Slovakia, belonging to the institution) -- Klapita, Vladimír (703 Slovakia)
      Keywords in English: optimization; inventory level; procurement; multi-criteria model; inventory management

      Changed by: Hana Dlouhá, učo 19800. Changed: 2/9/2016 10:45.
    15. STOPKA, Ondrej, Rudolf KAMPF, Ján LIŽBETIN and Martina HLATKÁ. Proposal for optimizing the timetables within tram subsystem of urban public transport from the international conception. Online. In prof. Ing. Tomas Kliestik, Ph.D. Globalization and its Socio-economic consequences. Žilina, SR: ZU - UNIVERSITY OF ZILINA, The Faculty of Operation and Economic of Transport and Communications, Department of Economics, 2016, p. 2135-2141. ISBN 978-80-8154-191-9.
      Name in Czech: Návrh optimalizace jízdních řádů v rámci tramvajového subsystému městské veřejné dopravy v mezinárodním pojetí
      RIV/75081431:_____/16:00001047 Proceedings paper. Land transport systems and equipment. English. Slovakia.
      Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Kampf, Rudolf (203 Czech Republic, belonging to the institution) -- Ližbetin, Ján (703 Slovakia, belonging to the institution) -- Hlatká, Martina (203 Czech Republic, belonging to the institution)
      Keywords in English: optimization; timetable; tram subsystem; globalization; urban public transport
      Type of proceedings: post-proceedings

      Changed by: Hana Dlouhá, učo 19800. Changed: 14/6/2017 10:50.
    16. BARTUŠKA, Ladislav, Ondrej STOPKA, M. CHOVANCOVÁ and Ján LIŽBETIN. Proposal of Optimizing the Transportation Flows of Consignments in the Distribution Center. In Neuveden. Transport Means 2016. KAUNAS, LITHUANIA: KAUNAS UNIVERSITY OF TECHNOLOGY PRESS, 2016, p. 107-111. ISSN 1822-296X.
      Name in Czech: Návrh optimalizace přepravních toků zásilek v distribučním centru
      RIV/75081431:_____/16:00001085 Proceedings paper. Municipal, regional and transportation planning. English. Lithuania.
      Bartuška, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Chovancová, M. (703 Slovakia) -- Ližbetin, Ján (703 Slovakia, belonging to the institution)
      Keywords in English: optimizing; transportation flow; consignment; distribution center; layout; logistics
      Type of proceedings: post-proceedings

      Changed by: Mgr. Blanka Mikšíková, učo 22534. Changed: 5/10/2017 09:18.
    17. LIŽBETIN, Ján and Ondrej STOPKA. Proposal of the roundabout solution within the particular urban traffic operation. Open Engineering. Varšava, Polsko: De Gruyter Open Ltd., 2016, vol. 6, No 1, p. nestránkováno, 5 pp. ISSN 2391-5439.
      Name in Czech: Řešení okružní křižovatky v městském dopravním provozu
      RIV/75081431:_____/16:00001435 Article in a journal. Land transport systems and equipment. English. Poland.
      Ližbetin, Ján (703 Slovakia, guarantor, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution)
      Keywords in English: transport; telematics; roundabout; traffic operation

      Changed by: Ing. Anna Palokha, učo 18083. Changed: 14/10/2019 09:10.
    18. RIEVAJ, Vladimír, Ondrej STOPKA, Ján VRÁBEL, Lenka MOKŘIČKOVÁ and Conrad SCHMIDT. The Impact of Air Resistance on the Fuel Consumption in Real Conditions within the Transport Operation. Communications : scientific letters of the University of Žilina. Žilina: The University of Žilina, 2016, Volume 18, No 2, p. 57-61. ISSN 1335-4205.
      Name in Czech: Dopad odporu vzduchu na spotřebu paliva v reálných podmínkách v rámci dopravní operace
      RIV/75081431:_____/16:00000695 Article in a journal. Land transport systems and equipment. English. Slovakia.
      Rievaj, Vladimír (703 Slovakia) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Vrábel, Ján (703 Slovakia) -- Mokřičková, Lenka (703 Slovakia) -- Schmidt, Conrad (276 Germany)
      Keywords in English: Air resistance; vehicle´s fuel consumption; resistance; driving speed; air temperature; air resistance coefficient
      Reviewed: yes

      Changed by: Věra Kostková, učo 6173. Changed: 29/8/2016 10:58.
    19. LIŽBETIN, Ján, Petr VEJS, Ondrej STOPKA and Václav CEMPÍREK. The Significance of Dynamic Detection of the Railway Vehicles Weight. Nase More. Dubrovnik: University of Dubrovnik, 2016, vol. 63, No 3, p. 156-160. ISSN 0469-6255.
      Name in Czech: Význam dynamického určování hmotnosti železničných vozidel
      RIV/75081431:_____/16:00000734 Article in a journal. Land transport systems and equipment. English. Croatia.
      Ližbetin, Ján (703 Slovakia, belonging to the institution) -- Vejs, Petr (703 Slovakia) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Cempírek, Václav (203 Czech Republic)
      Keywords in English: static and dynamic detection of the weights; railway vehicles railway infrastructure; safety

      Changed by: Hana Dlouhá, učo 19800. Changed: 2/9/2016 10:16.
    20. NÝVLT, Vladimír, Josef MUSÍLEK, Jiří ČEJKA and Ondrej STOPKA. The Study of Derinkuyu Underground City in Cappadocia Located in Pyroclastic Rock Materials. In M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, A. Segalini. World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016 (WMCAUS 2016). Netherlands: Elsevier Ltd., 2016, p. 2253-2258. ISSN 1877-7058.
      Name in Czech: Studie Derinkuyu podzemní město v Kappadokii nacházející se v pyroklastický sedimentech
      RIV/75081431:_____/16:00000886 Proceedings paper. Civil engineering. English. Netherlands.
      Nývlt, Vladimír (203 Czech Republic, belonging to the institution) -- Musílek, Josef (203 Czech Republic, belonging to the institution) -- Čejka, Jiří (203 Czech Republic, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution)
      Keywords in English: underground city; tuffs; caverns; infrastructure
      Type of proceedings: post-proceedings

      Changed by: Hana Dlouhá, učo 19800. Changed: 2/1/2017 16:43.

    2015

    1. JEŘÁBEK, Karel, Ondrej STOPKA, Terezie VONDRÁČKOVÁ and Věra VOŠTOVÁ. A technique for seabed mining. Nase More. Dubrovnik: University of Dubrovnik, 2015, vol. 62, No 1, p. 39-43. ISSN 0469-6255. Available from: https://dx.doi.org/10.17818/NM.1.7.2015.
      Name in Czech: Technika použitá pro těžbu na mořském dně
      RIV/75081431:_____/15:00000475 Article in a journal. Machinery and tools. English. Croatia.
      Jeřábek, Karel (203 Czech Republic, guarantor, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Vondráčková, Terezie (203 Czech Republic, belonging to the institution) -- Voštová, Věra (203 Czech Republic)
      Keywords in English: Dredging systems; Extraction; Raw materials; Sea minerals; Unconventional sources

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 16/2/2016 11:56.
    2. LIŽBETIN, Ján, Rudolf KAMPF, Ondrej STOPKA, Ladislav BARTUŠKA and Jiří ČEJKA. Aktuálny stav terminálov intermodálnej prepravy na Slovensku (Current status of intermodal transport terminals in Slovakia). In Horizonty železničnej dopravy 2015 : sborník příspěvků. 1. vyd. Žilina: Žilinská univerzita v Žiline, 2015, p. 143-147. ISBN 978-80-554-1097-5.
      Name in Czech: Aktuální stav terminálů intermodální přepravy na Slovensku
      Name (in English): Current status of intermodal transport terminals in Slovakia
      Land transport systems and equipment. Slovak. Slovakia.
      Keywords in English: intermodal transpor terminal; intermodal transport; railway transport

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 23/11/2015 11:49.
    3. KAMPF, Rudolf, Ondrej STOPKA, Ladislav BARTUŠKA and Karel ZEMAN. Circulation of vehicles as an important parameter of public transport efficiency. In Transport Means - Proceedings of the 19th International Scientific Conference on Transport Means. 1. vyd. Kaunas (Lithuania): Kaunas University of Technology, 2015, p. 143-146. ISSN 1822-296X.
      Name in Czech: Pohyb vozidel jako důležitý parametr efektivnosti veřejné dopravy
      RIV/75081431:_____/15:00000571 Proceedings paper. Municipal, regional and transportation planning. English. Lithuania.
      Kampf, Rudolf (203 Czech Republic, guarantor, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Bartuška, Ladislav (203 Czech Republic, belonging to the institution) -- Zeman, Karel (203 Czech Republic)
      Keywords in English: daily circulations of vehicles; transport costs; operation of public line bus transport

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 8/2/2016 11:53.
    4. STOPKA, Ondrej, Jiří ČEJKA, Rudolf KAMPF and Ladislav BARTUŠKA. Draft of the novel system of public bus transport lines in the particular territory. In Transport Means - Proceedings of the 19th International Scientific Conference on Transport Means. 1. vyd. Kaunas (Lithuania): Kaunas University of Technology, 2015, p. 39-42. ISSN 1822-296X.
      Name in Czech: Návrh nového systému veřejné autobusové linkové dopravy v daném území
      RIV/75081431:_____/15:00000570 Proceedings paper. Municipal, regional and transportation planning. English. Lithuania.
      Stopka, Ondrej (703 Slovakia, guarantor, belonging to the institution) -- Čejka, Jiří (203 Czech Republic, belonging to the institution) -- Kampf, Rudolf (203 Czech Republic, belonging to the institution) -- Bartuška, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: methods of operational analysis; decision-making; transport problem; optimization; public bus transport

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 8/2/2016 11:43.
    5. SITÁNYIOVÁ, Dana, Terezie VONDRÁČKOVÁ, Ondrej STOPKA, Markéta MYSLIVEČKOVÁ and Juraj MUZIK. GIS Based Methodology for the Geotechnical Evaluation of Landslide Areas. Online. In Marian Drusa, Marian Marschalko, Isik Yilmaz, Andrea Segallini, Anna Maria Ferrero, Martin Bednarik. Procedia Earth and Planetary Science, vol. 15 : The World Multidisciplinary Earth Sciences Symposium, WMESS 2015. Amsterdam: Elsevier, 2015, p. 389-394. ISSN 1878-5220.
      Name in Czech: Použití GIS metód pro geotechnické hodnocení sesuvných lokalit
      RIV/75081431:_____/15:00000604 Proceedings paper. Geology and mineralogy. English. Czech Republic.
      Sitányiová, Dana (703 Slovakia) -- Vondráčková, Terezie (203 Czech Republic, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Myslivečková, Markéta (203 Czech Republic, belonging to the institution) -- Muzik, Juraj (703 Slovakia)
      Keywords in English: GIS tools; data analysis; hydrogeological survey; model preparation

      Changed by: Věra Kostková, učo 6173. Changed: 15/4/2016 13:58.
    6. ŠIMKOVÁ, Ivana, Vladimír KONEČNÝ, Štefan LIŠČÁK and Ondrej STOPKA. Measuring the quality impacts on the performance in transport company. Transport Problems. Katowice (Polsko): Silesian University of Technology, 2015, vol. 10, No 3, p. 113-124. ISSN 1896-0596.
      Name in Czech: Míra působení jakosti na výkon dopravní společnosti
      RIV/75081431:_____/15:00000526 Article in a journal. Municipal, regional and transportation planning. English. Poland.
      Šimková, Ivana (703 Slovakia, guarantor) -- Konečný, Vladimír (703 Slovakia) -- Liščák, Štefan (703 Slovakia) -- Stopka, Ondrej (703 Slovakia, belonging to the institution)
      Keywords in English: EN ISO 9001; quality management systems; transport company; quality; performance

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 19/2/2016 11:45.
    7. BARTUŠKA, Ladislav, Ondrej STOPKA and Ján LIŽBETIN. Methodology for Determining the Traffic Volumes on Urban Roads in the Czech Republic. In Transport Means - Proceedings of the 19th International Scientific Conference on Transport Means. 1. vyd. Kaunas (Lithuania): Kaunas University of Technology, 2015, p. 215-218. ISSN 1822-296X.
      Name in Czech: Metodika pro určování objemu provozu na  městských pozemních komunikacích v České republice
      RIV/75081431:_____/15:00000572 Proceedings paper. Municipal, regional and transportation planning. English. Lithuania.
      Bartuška, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Ližbetin, Ján (703 Slovakia, belonging to the institution)
      Keywords in English: traffic volumes; transportation planning; AADT; average daily traffic; urban roads; expansion factors

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 8/2/2016 12:04.
    8. STOPKA, Ondrej, Ladislav BARTUŠKA and Rudolf KAMPF. Passengers’ evaluation of the integrated transport systems. Nase More. Dubrovnik: University of Dubrovnik, 2015, vol. 62, Special issue, p. 153-157. ISSN 0469-6255. Available from: https://dx.doi.org/10.17818/NM/2015/SI12.
      Name in Czech: Hodnocení Integrovaného dopravního systému cestujícími
      RIV/75081431:_____/15:00000557 Article in a journal. Municipal, regional and transportation planning. English. Croatia.
      Stopka, Ondrej (703 Slovakia, guarantor, belonging to the institution) -- Bartuška, Ladislav (203 Czech Republic, belonging to the institution) -- Kampf, Rudolf (203 Czech Republic, belonging to the institution)
      Keywords in English: Evaluation; Integrated transport system; Model; Passenger; Research; Survey

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 19/2/2016 13:42.
    9. STOPKA, Ondrej and Ivana ŠIMKOVÁ. Proposal Of Landfill Site Model In The Particular Territory. Transport and Telecommunication. Riga: Transport and Telecommunication Institute, 2015, vol. 16, No 4, p. 320-329. ISSN 1407-6160. Available from: https://dx.doi.org/10.1515/ttj-2015-0029.
      Name in Czech: Návrh modelu skládky odpadů v konkrétním území
      RIV/75081431:_____/15:00000566 Article in a journal. Theory and management systems. English. Latvia.
      Stopka, Ondrej (703 Slovakia, guarantor, belonging to the institution) -- Šimková, Ivana (703 Slovakia)
      Keywords in English: landfill site; waste logistics; municipal waste; decision-making problem; urban area

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 23/2/2016 11:40.
    10. GAŠPARÍK, Jozef, Ondrej STOPKA and Lubomír PEČENÝ. Quality evaluation in regional passenger rail transport. Nase More. Dubrovnik: University of Dubrovnik, 2015, vol. 62, Special issue, p. 114-118. ISSN 0469-6255. Available from: https://dx.doi.org/10.17818/NM/2015/SI5.
      Name in Czech: Hodnocení kvality regionální osobní železniční dopravy
      RIV/75081431:_____/15:00000548 Article in a journal. Land transport systems and equipment. English. Croatia.
      Gašparík, Jozef (703 Slovakia, guarantor, belonging to the institution) -- Stopka, Ondrej (703 Slovakia, belonging to the institution) -- Pečený, Lubomír (703 Slovakia)
      Keywords in English: Carrier; Customer; Integrated transport systems; Quality evaluation; Quality standards; Regional passenger rail transport; Services quality

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 19/2/2016 15:38.
    11. NGUYEN, Giang, Terezie VONDRÁČKOVÁ, Marian DRUSA, Luboš KOVALČÍK and Ondrej STOPKA. Sensibility of Sandy Soils Shear Strength Parameters on a Size of Spread Foundation. Online. In Marian Drusa, Marian Marschalko, Isik Yilmaz, Andrea Segallini, Anna Maria Ferrero, Martin Bednarik. Procedia Earth and Planetary Science, vol. 15 : The World Multidisciplinary Earth Sciences Symposium, WMESS 2015. Amsterdam: Elsevier, 2015, p. 304-308. ISSN 1878-5220.
      Name in Czech: Citlivost smykových parametrů písčitých základových půd na velikost plošného základu
      RIV/75081431:_____/15:00000601 Proceedings paper. Civil engineering. English. Netherlands.
      Nguyen, Giang (704 Viet Nam) -- Vondráčková, Terezie (203 Czech Republic, belonging to the institution) -- Drusa, Marian (703 Slovakia) -- Kovalčík, Luboš (703 Slovakia) -- Stopka, Ondrej (703 Slovakia, belonging to the institution)
      Keywords in English: polyester fibres; soil improvement; random reinforcement; direct shear test; angle of internal friction; cohesion.
      Reviewed: yes

      Changed by: Věra Kostková, učo 6173. Changed: 18/4/2016 08:34.
    12. STOPKA, Ondrej, Jozef GAŠPARÍK and Ivana ŠIMKOVÁ. The Methodology of the Customers’ Operation from the Seaport Applying the “Simple Shuttle Problem”. Nase More. Dubrovnik: University of Dubrovnik, 2015, roč. 62, No 4, p. 283-286. ISSN 0469-6255. Available from: https://dx.doi.org/10.17818/NM/2015/4.7.
      Name in Czech: Metodologie obsluhy zákazníků z námořního přístavu uplatněním "Simple Shuttle Problem"
      RIV/75081431:_____/15:00000565 Article in a journal. Municipal, regional and transportation planning. English. Croatia.
      Stopka, Ondrej (703 Slovakia, guarantor, belonging to the institution) -- Gašparík, Jozef (703 Slovakia, belonging to the institution) -- Šimková, Ivana (703 Slovakia)
      Keywords in English: seaport; simple shuttle problem; customers; operation; supply

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 20/1/2016 14:12.
    13. STOPKA, Ondrej, Ivana ŠIMKOVÁ and Vladimír KONEČNÝ. The quality of service in the public transport and shipping industry. Nase More. Dubrovnik: University of Dubrovnik, 2015, vol. 62, Special Issue, p. 126-130. ISSN 0469-6255. Available from: https://dx.doi.org/10.17818/NM/2015/SI7.
      Name in Czech: Kvalita služeb ve veřejné dopravě a lodním průmyslu
      RIV/75081431:_____/15:00000553 Article in a journal. Land transport systems and equipment. English. Croatia.
      Stopka, Ondrej (703 Slovakia, guarantor, belonging to the institution) -- Šimková, Ivana (703 Slovakia) -- Konečný, Vladimír (703 Slovakia)
      Keywords in English: Public transport; Quality management system; Satisfaction; Service; Shipping industry

      Changed by: Mgr. Václav Karas, učo 10752. Changed: 1/4/2016 23:33.
Displayed: 22/11/2024 14:25