-
PROCHÁZKA, Robert, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Tozan HAKAN, Cristina BORZAN, Milan KADNÁR, Zuzana PALKOVÁ, Roman GÁLIK and Karolína SLAMOVÁ. Collection of Plastic Packaging of Various Types: Sorting of Fractions of Plastic Waste Using Both Automated and Manual Modes. IEEE Access. New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2024, Neuveden, Neuveden, p. 44244-44261. ISSN 2169-3536.
-
HARNIČÁROVÁ, Marta, Jan VALÍČEK and Vladimír ŠEPEĽÁK. Editorial: Recent advances in the identification of stress-strain states of materials. Frontiers in Materials. LAUSANNE , SWITZERLAND: Frontiers Media S.A, 2024, Neuveden, Neuveden, p. 1-2. ISSN 2296-8016.
-
KHALILIA, Walid, Marta HARNIČÁROVÁ, Tawfiq QUBBAJ, Yahya ISTAITIH, Aziz A. SALAMEH, Munqez J.Y. SHTAYA, Jan VALÍČEK, Sabri SAGHIR, Abdalhadi F. DEGHLES and Ahmed ABU SHABAN. STUDENT’S AWARENESS, KNOWLEDGE, AND PERCEPTIONS OF PRECISION AGRICULTURE TECHNOLOGY IN PALESTINIAN AGRICULTURAL FACULTIES. Academic Journal of Manufacturing Engineering. Cluj Napoca: Editura Politehnica, 2024, vol. 22, No 1, p. 135-144. ISSN 1583-7904.
-
PAS, Jacek, Tomasz KLIMCZAK, Adam ROSINSKI, Marek STAWOWY, Stanislaw DUER and Marta HARNIČÁROVÁ. The Dynamic Change in the Reliability Function Level in a Selected Fire Alarm System during a Fire. Sensors. MDPI, 2024, vol. 24, No 13, p. 0-30, 30 pp. ISSN 1424-8220.
-
KADNÁR, Milan, Peter KÁČER, Marta HARNIČÁROVÁ, Jan VALÍČEK, František TÓTH, Marián BUJNA, Milena KUŠNEROVÁ, Rastislav MIKUŠ and Marian BORŽAN. Comparison of Linear Regression and Artificial Neural Network Models for the Dimensional Control of the Welded Stamped Steel Arms. Mathematical machines and systems. Ukrajina: Institute of Mathematical Machines and Systems of the NAS of Ukraine, 2023, vol. 11, No 3, p. 1-18. ISSN 1028-9763.
-
VENCL, Aleksander, Petr SVOBODA, Simon KLANČNIK, Adrian BUT, Miloš VORKAPIĆ, Marta HARNIČÁROVÁ and Blaža STOJANOVIĆ. Influence of Al2O3 Nanoparticles Addition in ZA-27 Alloy-Based Nanocomposites and Soft Computing Prediction. Lubricants. Switzerland: MDPI, 2023, vol. 11, No 1, p. 1-13, 14 pp. ISSN 2075-4442.
-
KOPAL, Ivan, Ivan LABAJ, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Hakan TOZAN. Intelligent Modelling of the Real Dynamic Viscosity of Rubber Blends Using Parallel Computing. Polymers. Basel, Switzerland: MDPI, 2023, vol. 15, No 17, p. 1-20. ISSN 2073-4360.
-
ŠAFÁŘ, Marek, Jan VALÍČEK, Marta HARNIČÁROVÁ, Michal ŠAJGALÍK, Hakan TOZAN, Milena KUŠNEROVÁ, Mário DRBÚL, Milan KADNÁR and Andrej CZÁN. Proposal for the identification of residual stresses after turning and hardening of bearing steel. Frontiers in Materials. LAUSANNE , SWITZERLAND: Frontiers Media S.A, 2023, vol. 10, Neuveden, p. 1-17. ISSN 2296-8016.
-
VALÍČEK, Jan, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Zuzana PALKOVÁ, Ivan KOPAL, Cristina BORZAN, Andrej CZÁN, Rastislav MIKUŠ, Stanislaw DUER and Vladimír ŠEPÁLEK. Stress-strain parameter prediction method for AWJ technology from surface topography. International journal of advanced manufacturing technology. London, United Kingdom: Springer, 2023, vol. 127, 5-6, p. 2617-2635. ISSN 0268-3768.
-
LABAJ, Ivan, Petra SKALKOVÁ, Ivan KOPAL, Júlia VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Peter BOŠKO and Jana DOBROVSKÁ. Study of the influence of Chitosan on selected properties of elastomeric blends. Materialwissenschaft und Werkstofftechnik. Verlag Wiley-VCH, 2023, vol. 54, No 4, p. 429-440. ISSN 0933-5137.
-
STAWOWY, Marek, Stanisław DUER, Krzysztof PERLICKI, Tomasz MROZEK and Marta HARNIČÁROVÁ. Supporting Information Quality Management in Information and Communications Technology Systems with Uncertainty Modelling. Energies. Basel, Switzerland: MDPI, 2023, vol. 16, No 6, p. 1-18. ISSN 1996-1073.
-
HARNIČÁROVÁ, Marta, Marek STAWOWY, Adam ROSIŃSKI, Jacek PAŚ, Stanislaw DUER and Krzysztof PERLICKI. The Reliability and Exploitation Analysis Method of the ICT System Power Supply with the Use of Modelling Based on Rough Sets. Energies, MDPI. Basel, Switzerland: MDPI, 2023, vol. 16, No 12, p. 1-18. ISSN 1996-1073.
-
KOPAL, Ivan, Ivan LABAJ, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Darina ONDRUŠOVÁ, Jan KRMELA and Zuzana PALKOVÁ. A Generalized Regression Neural Network Model for Predicting the Curing Characteristics of Carbon Black-Filled Rubber Blends. Polymers. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, vol. 14, No 4, p. nestránkováno, 18 pp. ISSN 2073-4360.
-
PANDA, Anton, Volodymyr NAHORNYI, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Petr BARON, Iveta PANDOVÁ and Patrik SOROČIN. A novel method for online monitoring of surface quality and predicting tool wear conditions in machining of materials. The International Journal of Advanced Manufacturing Technology. Londýn, Spojené království: SPRINGER LONDON LTD, 2022, vol. 123, No 5, p. 3599-3612, 88 pp. ISSN 0268-3768.
-
DELICE, Elif, Hakan TOZAN, Melis Almula KARADAYI, Marta HARNIČÁROVÁ and Başak TURAN. An Integrated Framework for Non-Traditional Machining Process Technology Selection in Healthcare Applications. TEHNICKI VJESNIK-TECHNICKÝ VĚSTNÍK. Slavonski Brod, Chorvatsko: Strojarski Facultet, Sveuciliste Josipa Jurja Strossmayera u Osijeki, 2022, vol. 29, No 6, p. 2137-2146. ISSN 1330-3651.
-
PANDA, Anton, Kostiantyn DYADYURA, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Tatyana IVAKHNIUK, Liudmyla HREBENYK, Oleksandr SAPRONOV, Vitalii SOTSENKO, Pavlo VOROBIOV, Vitalii LEVYTSKYI, Andriy BUKETOV and Iveta PANDOVA. Ecotoxicity Study of New Composite Materials Based on Epoxy Matrix DER-331 Filled with Biocides Used for Industrial Applications. Polymers. Basel, Switzerland: MDPI, 2022, 14/2022, No 16, p. 3275-3302. ISSN 2073-4360.
-
CZÁN, Andrej, Richard JOCH, Michal ŠAJGALÍK, Jozef HOLUBJÁK, Andrej HORÁK, Pavol TIMKO, Jan VALÍČEK, Milena KUŠNEROVÁ and Marta HARNIČÁROVÁ. Experimental Study and Verification of New Monolithic Rotary Cutting Tool for an Active Driven Rotation Machining. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 5, p. nestránkováno, 17 pp. ISSN 1996-1944.
-
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Stanislaw DUER, Milena KUŠNEROVÁ, Zuzana PALKOVÁ and Zuzana MITAĽOVÁ. Express diagnostics of stress-strain states of materials. Materialwissenschaft und Werkstofftechnik. Weinheim, Germany: Verlag Wiley-VCH, 2022, 53/2022, No 4, p. 394-401. ISSN 0933-5137.
-
KOVÁČ, Ivan, Rastislav MIKUŠ, Jozef ŽARNOVSKÝ, Róbert DRLIČKA, Marta HARNIČÁROVÁ, Jan VALÍČEK and Milan KADNÁR. Increasing the wear resistance of surface layers of selected steels by TIG electric arc surface remelting process using a powder based on CaCN2. The International Journal of Advanced Manufacturing Technology. Londýn, Spojené království Velké Británi: SPRINGER LONDON LTD, 2022, vol. 123, No 5, p. 1985-1997, 14 pp. ISSN 0268-3768.
-
NAHORNYI, Volodymyr, Anton PANDA, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Iveta PANDOVÁ, Stanislaw LEGUTKO, Zuzana PALKOVÁ and Ondrej LUKÁČ. Method of Using the Correlation between the Surface Roughness of Metallic Materials and the Sound Generated during the Controlled Machining Process. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 3, p. nestránkováno, 22 pp. ISSN 1996-1944.
-
PALKOVÁ, Zuzana, Marta HARNIČÁROVÁ, Jan VALÍČEK, Vojtěch STEHEL, Walid Mahmoud KHALILIA, Nikolay MIHAILOV, Maria FRAGKAKI and Aziz Abdel Karim Awad SALAMEH. Perspective of education in Agriculture 4.0 in selected countries in European Union and Palestine. Online. In Boris Evstatiev. 2022 8th International Conference on Energy Efficiency and Agricultural Engineering, EE and AE 2022. 8th ed. Ruse, Bulgaria: Institute of Electrical and Electronics Engineers Inc. (IEEE), 2022, p. nestránkováno, 677 pp. ISBN 978-1-6654-0709-0.
-
GAVLAS, Martin, Michal KACO, Vladimir DEKÝŠ, Miroslav ŠPIRIAK, Silvia SLABEJOVÁ, Andrej CZÁN, Jozef HOLUBJAK, Milena KUŠNEROVÁ, Marta HARNIČÁROVÁ and Jan VALÍČEK. Research on the Oscillation in Centerless Grinding Technology When Machining Bearing Steel. Materials. Basel, Switzerland: MDPI, 2022, neuveden, 15/2022, p. nestránkováno, 14 pp. ISSN 1996-1944.
-
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Ivan KOPAL, Miloslav LUPTÁK, Rastislav MIKUŠ, Zdeněk PAVELEK, Martin FABIÁN and Vladimír ŠEPEĽÁK. Structural and Mechanical Changes of AlMgSi0.5 Alloy during Extrusion by ECAP Method. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 6, p. nestránkováno, 22 pp. ISSN 1996-1944.
-
KHALILIA, Walid, Miroslav GOMBÁR, Zuzana PALKOVÁ, Michal PALKO, Jan VALÍČEK and Marta HARNIČÁROVÁ. Using Virtual Reality as Support to the Learning Process of Forensic Scenarios. IEEE Access. New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2022, vol. 2022, neuvedeno, p. 83297-83310. ISSN 2169-3536.
-
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Zuzana PALKOVÁ, Ivan KOPAL, Cristina BORZAN, Milan KADNÁR and Stanislav PAULOVIČ. A New Method of Predicting the Structural and Mechanical Change of Materials during Extrusion by the Method of Multiple Plastic Deformations. Materials. Basel, Switzerland: MDPI, 2021, volume 14, No 10, p. 2594-2616. ISSN 1996-1944.
-
KUŠNEROVÁ, Milena, Michal ŘEPKA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Roman DANEL and Zuzana PALKOVÁ. A study of the connection between bending stress and belt friction using a servomotor controlled by a computer. IEEE Access. IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2021, vol. 9, No 2021, p. 11173-11182. ISSN 2169-3536. Available from: https://dx.doi.org/10.1109/ACCESS.2021.3049971.
-
DARIN, G., K. IMAKUMA, R.T. SANTIAGO, K.L. DA SILVA, L.F. CÓTICA, M. FABIÁN, Jan VALÍČEK, H. HAHND and Vladimír ŠEPEĽÁK. Disordered Gd6UO12-δ with the cation antisite defects prepared by a combined mechanochemical−thermal method. Journal of Nuclear Materials. AMSTERDAM, NETHERLANDS: ELSEVIER, 2021, 549/2021, June 2021, p. 152895-152900. ISSN 0022-3115.
-
DUER, Stanisław, Konrad ZAJKOWSKI, Marta HARNIČÁROVÁ, Henryk CHARUN and Dariusz BERNATOWICZ. Examination of Multivalent Diagnoses Developed by a Diagnostic Program with an Artificial Neural Network for Devices in the Electric Hybrid Power Supply System “House on Water”. Energies. SWITZERLAND: MDPI, 2021, volume 14/, No 8, p. nestránkováno, 19 pp. ISSN 1996-1073.
-
FABIAN, Martin, Dirk MENZEL, Anatoly Ye YERMAKOV, Hristo KOLEV, Maria KAŇUCHOVÁ, Jianmin SHI, Jaroslav KOVÁČ, Nina KOSTOVA, Da Silva KLEBSON L., Senna MAMORU, Marta HARNIČÁROVÁ, Jan VALÍČEK, Hahn HORST and Vladimír ŠEPEĽÁK. Nanostructure and magnetic anomaly of mechanosynthesized Ce1-xYxO2-delta (x <= 0.3) solid solutions. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS. Neuveden: PERGAMON-ELSEVIER SCIENCE LTD, 2021, vol. 148, January, p. 1-7. ISSN 0022-3697. Available from: https://dx.doi.org/10.1016/j.jpcs.2020.109673.
-
KADNÁR, Milan, Peter KÁČER, Marta HARNIČÁROVÁ, Jan VALÍČEK, Mirek GOMBÁR, Milena KUŠNEROVÁ, František TÓTH, Marian BORŽAN and Juraj RUSNÁK. Prediction Model of the Resulting Dimensions of Welded Stamped Parts. Materials. Basel, Switzerland: MDPI, 2021, volume 14/, No 11, p. 3062-3078. ISSN 1996-1944.
-
PACURAR, Razvan, Petru BERCE, Anna PETRILAK, Ovidiu NEMES, Cristina Stefana Miron BORZAN, Marta HARNIČÁROVÁ and Ancuta PACURAR. Selective Laser Melting of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, and Morphological and Mechanical Characterization. Materials. Basel, Switzerland: MDPI, 2021, vol. 14, No 15, p. nestránkováno, 19 pp. ISSN 1996-1944.
-
LUCENILDO DA SILVA, Klebson, Rafael SANTIAGO TRAUTWEIN, Rodolfo BEZERRA DA SILVA, Martin FABIÁN, Erik ČIŽMÁR, Mariia HOLUB, Olha SKURIKHINA, Marta HARNIČÁROVÁ, Vladimír GIRMAN, Dirk MENZEL, Klaus Dieter BECKER, Horst HAHN and Vladimír ŠEPEĽÁK. Suppression of the Cycloidal Spin Arrangement in BiFeO3 Caused by the Mechanically Induced Structural Distortion and Its Effect on Magnetism. Frontiers in Materials. AVENUE DU TRIBUNAL FEDERAL 34, LAUSANNE: Frontiers Media S.A, 2021, volume 8, No 2021, p. nestránkováno, 9 pp. ISSN 2296-8016.
-
DARIN, Gaspar, Kengo IMAKUMA, Rafael Trautwein SANTIAGO, Klebson Lucenildo DA SILVA, Luiz Fernardo CÓTICA, Martin FABIÁN, Jan VALÍČEK, Horst HAHN and Vladimír ŠEPEĽÁK. X-ray diffraction and thermoanalytical datasets of precursors of the Gd6UO12-δ phase processed by combined mechanochemical−thermal routes. Data in Brief. Netherlands: Elsevier BV, 2021, volume 35, April 2021, p. 106972-106977. ISSN 2352-3409.
-
PANDOVÁ, Iveta, Miroslav RIMÁR, Anton PANDA, Jan VALÍČEK, Milena KUŠNEROVÁ and Marta HARNIČÁROVÁ. A Study of Using Natural Sorbent to Reduce Iron Cations from Aqueous Solutions. International Journal of Environmental Research and Public Health. Basel: MDPI, 2020, vol. 17, No 10, p. 1-17. ISSN 1660-4601. Available from: https://dx.doi.org/10.3390/ijerph17103686.
-
MITAL'OVA, Zuzana, Dusan MITAL, Frantisek BOTKO, Juliana LITECKA, Jozef ZAJAC, Marta HARNIČÁROVÁ and Jan VALÍČEK. Identification of Topography of Surfaces Created by Turning Biomaterials with Optical Profilometry. BIORESOURCES. Neuveden: NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI, 2020, vol. 15, No 2, p. 2483 - 2494. ISSN 1930-2126. Available from: https://dx.doi.org/10.15376/biores.15.2.2483-2494.
-
KMEC, Ján, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, Roman DANEL and Michal ŘEPKA. Metody řízení a plánování produkčních procesů (Methods of management and planning of production processes). 1.ed. Polsko: Wydavnictwo Sztafeta, 2020, 134 pp. ISBN 978-83-954599-9-3.
-
KOPAL, Ivan, Juliana VRŠKOVÁ, Alžběta BAKOŠOVÁ, Marta HARNIČÁROVÁ, Ivan LABAJ, Darina ONDRUŠOVÁ, Jan VALÍČEK and Jan KRMELA. Modelling the Stiffness-Temperature Dependence of Resin-Rubber Blends Cured by High-Energy. Polymers. Basel: MDPI, 2020, vol. 12, No 11, p. 1 - 18. ISSN 2073-4360. Available from: https://dx.doi.org/10.3390/polym12112652.
-
KMEC, Ján, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, Roman DANEL and Michal ŘEPKA. Progresivní technologie produkčních procesů (Progressive technology of production processes). 1st ed. Polsko: Wydavnictwo Sztafeta, 2020, 309 pp. ISBN 978-83-66528-00-0.
-
KMEC, Ján, Marta HARNIČÁROVÁ, Cristina BORZAN, Marian BORZAN, Jan VALÍČEK, Jiří KŘÍŽ and Milena KUŠNEROVÁ. Proposal for a method of measurement and control of surface quality in the course of abrasive waterjet cutting of material. Online. In MODERN TECHNOLOGIES IN MANUFACTURING. Neuveden: E D P SCIENCES, 2019, p. 1-8. ISSN 2261-236X. Available from: https://dx.doi.org/10.1051/matecconf/201929902003.
-
KOSA, Patrik, Martin OLEJAR, Zuzana PALKOVÁ, Dušan HRUBÝ, Vladimír CVIKLOVIČ, Marta HARNIČÁROVÁ and Jan VALÍČEK. The effect of the number of inference rules of a fuzzy controller on the quality of control of a mobile robot. Online. In Balc, N; Leordean, D. Modern Technologies in Manufacturing. Neuveden: E D P SCIENCES, 2019, p. 1-6. ISSN 2261-236X. Available from: https://dx.doi.org/10.1051/matecconf/201929905002.
-
GOMBÁR, Miroslav, Ján KMEC, Miroslav BADIDA, Lýdia SOBOTOVÁ, Alena VAGASKÁ and A. BADIDOVÁ. ANALYSIS OF PHYSICAL FACTORS ON CHOSEN PROPERTIES OF ANODIC ALUMINA OXIDE (AAO) LAYERS AND ENVIRONMENT. Metalurgija. Zagreb: Hrvatsko metalurško društvo (HMD) - Croatia Metallurgical Society (CMS), 2016, roč. 55, No 4, p. 799-802. ISSN 0543-5846.
-
MAJERNÍK, Ján. Analýza ovplyvnenia makroštruktúry odliatku pomocou konštrukcie vtokového zárezu a jej vplyv na mechanické vlastnosti odliatkov (Analysis of influence by casting macrostructure inlet notch design and its influence on the mechanical properties of castings). In Jozef Husár, Michal Balog, Lucia Knapčíková. Management of manufacturing systems 2016. Bratislava: Technická univerzita v Košiciach, 2016, p. 90-95. ISBN 978-80-553-3036-5.
-
Determination of Relationship between Chemical Composition of Electrolyte and Surface Sample QualityMICHAL, Peter, Alena VAGASKÁ and Miroslav GOMBÁR. Determination of Relationship between Chemical Composition of Electrolyte and Surface Sample Quality. Key Engineering Materials. Zurich: Trans Tech Publications, 2016, vol. 2016, No 669, p. 150-157. ISSN 1662-9795.
-
MICHAL, Peter, Alena VAGASKÁ, Erika FECHOVÁ, Miroslav GOMBÁR and Dražan V. KOZAK. Effect of electrolyte temperature on the thickness of anodic aluminium oxide (AAO) layer. Metalurgija. Zagreb: Hrvatsko metalurško društvo (HMD) - Croatia Metallurgical Society (CMS), 2016, roč. 55, No 3, p. 403-406. ISSN 0543-5846.
-
CÁRACH, Ján, Sergej HLOCH, Petr HLAVÁČEK, Miroslav GOMBÁR, Dagmar KLICHOVÁ, František BOTKO, Dušan MITAL and Dominika LEHOCKÁ. Hydro-abrasive disintegration of alloy Monel K-500 - the influence of tecnoogical and abrasive factors on the surface quality. Online. In S. Hloch, G. Krolczyk. International Conference on Manufacturing Engineering and Materials, ICMEM. Slovensko: Elsevier Ltd., 2016, p. 17-23. ISSN 1877-7058.
-
CAIS, Jaromír, Viktorie WEISS and Jaroslava SVOBODOVÁ. Microstructure and Mechanical Properties of Products of Alloy AL+3%Mg Made by Low-Pressure Casting. Metallurgist. New York: Springer, 2016, vol. 60, 1-2, p. 99-102. ISSN 0026-0894.
-
GOMBÁR, Miroslav, Ján KMEC, Alena VAGASKÁ, Lydia SOBOTOVÁ and Miroslav BADIDA. Options surface treatment aluminum structural components. MM Science Journal. Praha: MM publishing Ltd., 2016, Neuveden, November, p. 1237-1238. ISSN 1803-1269.
-
WEISS, Viktorie. Research of the Chemical Heterogeneity during Crystallization for AlCu4MgMn Alloy and the Possibility of its Elimination. Manufacturing Technology. Ústí nad Labem: J. E. Purkyne University, 2016, Vol. 16, No 1, p. 289-294. ISSN 1213-2489.
-
VAGASKÁ, Alena, Peter MICHAL, Miroslav GOMBÁR, Erika FECHOVÁ and Ján KMEC. Simulation of technological process by usage neural networks and factorial design of experiments. MM Science Journal. MM Science Journal, 2016, Neuveden, September 2016, p. 999-1003. ISSN 1803-1269.
-
VAGASKÁ, Alena, Miroslav GOMBÁR and Peter MICHAL. The application of mathematical and statistcal methods in technical practice. Online. In Richtarikova D., Szarkova D., Balko L. 15th Conference on Applied Mathematics APLIMAT 2016. Neuveden: Slovak University of Technology in Bratislava, 2016, p. 1054-1063. ISBN 978-80-227-4531-4.
-
BADIDA, Miroslav, Lýdia SOBOTOVÁ, Miroslav GOMBÁR, Ján KMEC, Daniel KUČERKA and Roman HRMO. The contribution to coating quality evaluation by statistical methods. Metalurgija. Zagreb: Hrvatsko metalurško družstvo (HMD) - Croatia Metallurgical Society (CMS), 2016, roč. 55, No 3, p. 445-448. ISSN 0543-5846.
-
VAGASKÁ, Alena, Erika FECHOVÁ, Peter MICHAL and Miroslav GOMBÁR. The Influence of Input Factors of Aluminium Anodizing Process on Resulting Thickness and Quality of Aluminium Oxide Layer. Online. In S. Hloch, G. Krolczyk. International Conference on Manufacturing Engineering and Materials, ICMEM. Slovensko: Elsevier Ltd., 2016, p. 512-519. ISSN 1877-7058.
-
SYMONOVA, Anastasiya, Francois DUCOBU and Viktorie WEISS. The Mechanics of Machining Ultrafine-Grained Grade 2 Ti Processed Severe Plastic Deformation. Manufacturing Technology. Ústí nad Labem: J. E. Purkyne University, 2016, Vol. 16, No. 3, p. 627-633. ISSN 1213-2489.
-
WEISS, Viktorie. VLIV BERYLLIA NA MODIFIKAČNÍ ÚČINKY U SLITINY AlSi7Mg0,3 (INFLUENCE BERYLLIUM FOR MODIFICATIONS OF ALLOYS AlSi7Mg0,3). In Zvyšovanie životnosti nástrojov a konštrukčných častí mechanizmov : vedecký recenzovaný zborník. 1. vydanie. Zvolen, Slovenská republika: Technická univerzita vo Zvolene, 2016, p. 125-132. ISBN 978-80-228-2862-8.
-
WEISS, Viktorie. VLIV PROCESU CHLADNUTÍ FORMY NA STRUKTURU A VYBRANÉ MECHANICKÉ VLASTNOSTI SLITINY AlZn5,5MgCu PŘED A PO HOMOGENIZAČNÍM ŽÍHÁNÍ (INFLUENCE OF THE MOULD COOLING PROCESS ON THE STRUCTURE AND MECHANICAL PROPERTIES AlZn5,5MgCu ALLOY BEFORE AND AFTER HOMOGENIZATION ANNEALING). In Zvyšovanie životnosti nástrojov a konštrukčných častí mechanizmov : vedecký recenzovaný zborník. 1. vydanie. Zvolen, Slovenská republika: Technická univerzita vo Zvolene, 2016, p. 133-142. ISBN 978-80-228-2862-8.
-
HALAPI, Michal and Monika KARKOVÁ. Využitie pevnostnej analýzy jako kontrolného mechanizmu na overenie životaschopnosti konštrukčného návrhu nádob na uskladnenie horľavého a výbušného média (Use strength analysis as a control mechanism to verify the viability of the construction design of containers for storage of flammable and explosive liquids). první. Neuveden: Vydavatelství Západočeské univerzity v Plzni, 2016, p. 51-59. ISBN 978-80-261-0629-6.
-
VAGASKÁ, Alena, Miroslav GOMBÁR, Peter MICHAL and Ján KMEC. Aplikácia matematicko-statistických metód pri stanovení kritickej teploty elektrolytu v procese anodickej oxidácie hliníka (The application of mathematical and statistical methods to determine the critical temperature of the electrolyte during the anodizing process). In 14th Conference on Applied Mathematics, APLIMAT 2015. 1. vyd. Bratislava: Slovak University of Technology in Bratislava, 2015, p. 738-747. ISBN 978-80-227-4314-3.
-
SPIŠÁK, Emil, Miroslav GOMBÁR, Ján KMEC, Alena VAGASKÁ, Erika FECHOVÁ, Peter MICHAL, Ján PITEL and Daniel KUČERKA. Effect of the Electrolyte Temperature and the Current Density on a Layer Microhardness Generated by the Anodic Aluminium Oxidation. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING. New York: HINDAWI PUBLISHING CORPORATION, 2015, vol. 2015, březen, p. Nestránkováno, 9 pp. ISSN 1687-8434. Available from: https://dx.doi.org/10.1155/2015/659846.
-
KLEPANCOVÁ, Michaela. Geometrická postupnosť v chémii (Geometric sequence in chemistry). Trendy ve vzdělávání. Olomouc: Univerzita Palackého v Olomouci, 2015, vol. 8, No 1, p. 210-216. ISSN 1805-8949.
-
SPIŠÁK, Emil, Ján KMEC, Janka MAJERNÍKOVÁ, Daniel KUČERKA and Miroslav GOMBÁR. Materiály v súčasnej praxi (Materials in current practice). 1. vyd. České Budějovice: Vysoká škola technická a ekonomická v Českých Budějovicích, 2015, 240 pp. ISBN 978-80-7468-089-2.
-
BIBA, Vladislav and Michaela KLEPANCOVÁ. Názor študentov na predmet chémia - skúmanie pomocou testu nezávislosti (Student's attitude towards subject chemistry - research using test of independence). Trendy ve vzdělávání. Olomouc: Univerzita Palackého v Olomouci, 2015, vol. 8, No 1, p. 22-26. ISSN 1805-8949.
-
BADIDA, Miroslav, Miroslav GOMBÁR, Alica MAŠLEJOVÁ, Lýdia SOBOTOVÁ, Ján KMEC and Alena VAGASKÁ. Ocena jakości powłoki cynkowej metodami statystycznymi (Evaluation of zinc coating quality by statistical methods). Przemysl Chemiczny. Warszawa: Wydawnictvo SIGMA-NOT, 2015, roč. 94, No 12, p. 2146-2149. ISSN 0033-2496.
-
MICHAL, Peter, Alena VAGASKÁ, Erika FECHOVÁ, Miroslav GOMBÁR and Ján KMEC. The Application of Predictive Model to Describe and Control Technological Process. Online. In 2nd ICSMMS 2015. 1. vyd. Curych (Švýcarsko): Trans Tech Publications, 2015, p. 1571-1574, 5 pp. ISSN 2375-8244.
-
SOBOTOVA, Lýdia, Miroslav BADIDA, Ján KMEC, Miroslav GOMBÁR and Daniel KUČERKA. The Simulation of the Electrolyte Temperature Effect on the Value Change of the Microhardness of Anodic Alumina Oxide Layers. 1. vyd. 2015.
-
VIKTORIE, Weiss and Jaroslava SVOBODOVÁ. The Use of Colour Metallography and EDS for Identification of Chemical Heterogeneity of Selected Aluminium Alloys Copper and Zinc Alloyed. Manufacturing Technology. Ústí nad Labem: Univerzita J. E. Purkyne, 2015, vol. 15, No 6, p. 1048-1053. ISSN 1213-2489.
-
MICHAL, Peter, Alena VAGASKÁ, Miroslav GOMBÁR, Ján KMEC, Emil SPIŠÁK and Daniel KUČERKA. Usage of Neural Network to Predict Aluminium Oxide Layer Thickness. Scientific World Journal. New York: Hindawi Publishing Corporation, 2015, vol. 2015, únor, p. Nestránkováno, 10 pp. ISSN 2356-6140. Available from: https://dx.doi.org/10.1155/2015/253568.
-
BIBA, Vladislav and Michaela KLEPANCOVÁ. Využitie testu nezávislosti pri skúmaní vzťahu študentov k predmetu chémia (Using independence test to investigate student's relationship to chemistry). Media4u Magazine. Praha: Ing. Jan Chromý, Ph.D., 2015, roč. 12, No 3, p. 30-34. ISSN 1214-9187.
-
KLEPANCOVÁ, Michaela and Dana SMETANOVÁ. Vztah studentů k přírodním vědám – chemie (On student´s relationship to natural sciencies - chemistry). Media4u Magazine. Praha: Ing. Jan Chromý, Ph.D., 2015, roč. 12, No 2, p. 6-9. ISSN 1214-9187.
-
KLEPANCOVÁ, Michaela and Dana SMETANOVÁ. Vztah univerzitních studentů k chemickým poznatkům (Attitude of university students to chemistry knowledge). Trendy ve vzdělávání. Olomouc: Univerzita Palackého v Olomouci, 2015, roč. 8, No 1, p. 225-232. ISSN 1805-8949.
-
KMEC, Ján, Janka MAJERNÍKOVÁ, Miroslav GOMBÁR, Alena VAGASKÁ, emil SPIŠÁK and Felix STACHOWICZ. Experimental study of the physical factors' influence on microhardness of AAO layers generated on material's AW-1050A. Scopus. 2014, p. 160-166, 6 pp. ISSN 1335-1532. Available from: https://dx.doi.org/10.12776/ams.v20i2.288.
-
KLEPANCOVÁ, Michaela, Daniel KUČERKA, Ján KMEC and Terézia TEŠTÍKOVÁ. Chemie ve strojírenství : studijní skripta (Chemistry in Engineering). 1. vyd. České Budějovice: Vysoká škola technická a ekonomická v Českých Budějovicích, 2014. ISBN 978-80-7468-071-7.
-
KMEC, Ján, Daniel KUČERKA, Miroslav GOMBÁR, Soňa RUSNÁKOVÁ and Štefan HUSÁR. Kovové materiály pre výrobu automobilov (Metallic materials for automobiles). 1. vyd. České Budějovice: Vysoká škola technická a ekonomická v Českých Budějovicích, 2014, 183 pp. ISBN 978-80-7468-069-4.
-
KMEC, Ján, Emil SPIŠÁK, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Roman HRMO, Miroslav GOMBÁR and L'uba BIČEJOVÁ. Materiály pre automobilový priemysel (The materials for the automotive industry). 1. vyd. Košice: Technická univerzita v Košiciach, 2014, 220 pp. ISBN 978-80-553-1862-2.
-
MICHAL, Peter, Alena VAGASKÁ, Miroslav GOMBÁR, Ján KMEC, Emil SPIŠÁK and Miroslav BADIDA. Prediction of the effect of chemical composition of electrolyte on the thickness of anodic aluminium oxide layer. International Journal of Mathematical Models and Methods in Applied Sciences. USA: North Atlantic University Union NAUN, 2014, vol. 8, No 1, p. 152-155. ISSN 1998-0140.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Ondřej VYŠÍN. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Martin VÁLEK. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Martin TONCAR. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Miroslav ŠIMKŮ. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Václav ŠTUDLAR. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Tomáš PEŠEK. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Michal HOLEČEK. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Tomáš PEŠEK. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Jan KAINRÁTH. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Jiří DUCHOŇ. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Miroslav MLÁDEK. Rámy jízdních kol (Frames for cycles). 2014.
-
PODAŘIL, Martin, Andrej KUBALA, Daniel KUČERKA, Ján KMEC and Jiří CECH. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Ondřej VYŠÍN. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Martin VÁLEK. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Jakub HOLICKÝ. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Martin TONCAR. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Miroslav ŠIMKŮ. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Václav ŠTUDLAR. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Tomáš SHÁNĚL. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Michal HOLEČEK. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Tomáš PEŠEK. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Jan FORMÁNEK. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Jan KAINRÁTH. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Jiří DUCHOŇ. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Miroslav MLÁDEK. Rámy jízdních kol (Frames for cycles). 2014.
-
VOCHOZKA, Marek, Jan VÁCHAL, Martin PODAŘIL, Daniel KUČERKA, Soňa RUSNÁKOVÁ, Ján KMEC and Jiří CECH. Rámy jízdních kol (Frames for cycles). 2014.
-
KUČERKA, Daniel, Ján KMEC, Lýdia SOBOTOVÁ, Soňa RUSNÁKOVÁ, Roman HRMO, Milan TIMKO, Martin PODAŘIL, Štefan HUSÁR and Monika KUČERKOVÁ. Strojárska technológia I : 1. diel (Engineering technology I : part I). 1. vyd. České Budějovice: Vysoká škola technická a ekonomická v Českých Budějovicích, 2014, 135 pp. ISBN 978-80-7468-058-8.
-
KUČERKA, Daniel, Soňa RUSNÁKOVÁ, Ján KMEC, Miroslav GOMBÁR, Miloslav PILEČEK, Roman HRMO, Martin PODAŘIL, L'uba BIČEJOVÁ and Monika KUČERKOVÁ. Strojárska technológia I : 2. diel (Engineering technology I : part II). 1. vyd. České Budějovice: Vysoká škola technická a ekonomická v Českých Budějovicích, 2014, 189 pp. ISBN 978-80-7468-068-7.
-
GOMBAR, M, L SOBOTOVA, M BADIDA and Ján KMEC. The comparison of possibilities at using of different electrolytes in the process of anodizing aluminum. Metalurgija. Zagreb: Hrvatsko metalurško družstvo (HMD) - Croatia Metallurgical Society (CMS), 2014, No 53, p. 47-50. ISSN 0543-5846.
-
GOMBÁR, M, Ján KMEC, M BADIDA, L SOBOTOVÁ, A VAGASKÁ and P MICHAL. The simulation of the temperature effects on the microhardness of anodic alumina oxide layers. Metalurgija. Zagreb: Hrvatsko metalurško družstvo (HMD) - Croatia Metallurgical Society (CMS), 2014, No 53, p. 59-62. ISSN 0543-5846.
-
ŠTÚR, Milan, Martin PODAŘIL and Daniel KUČERKA. Tvorba študijných materiálov z predmetu náuka o materiáloch II. Pre znevýhodnených študentov (Creating the study materials on the subject materials science II. For disadvantaged students.). In Dnešní Trendy Inovací 2014 : 5. mezinárodní vědecká konference a mezinárodní workshop. 1. vyd. Brno: B&M InterNets, s. r.o., 2014, p. 152-159. ISBN 978-80-260-6151-9.
-
KMEC, Ján, Daniel KUČERKA, Miroslav GOMBÁR, L'uba BIČEJOVÁ, Sobotová LÝDIA, Ludmila OPEKAROVÁ, Jarmila STRAKOVÁ, Alena VAGASKÁ and Roman HRMO. Waterjet for Practice. 1. vyd. Lüdenscheid: RAM - Verlag, 2014, 150 pp. Edition of scientific and technicla literature. ISBN 978-3-942303-27-9.
-
BADIDA, M, M GOMBÁR, L SOBOTOVÁ and Ján KMEC. Determination of electro less deposition by chemical nickeling. Metalurgija. Zagreb: Hrvatsko metalurško družstvo (HMD) - Croatia Metallurgical Society (CMS), 2013, roč. 3, vol. 52, p. 341-344. ISSN 0543-5846.
-
GOMBÁR, M, A VAGASKÁ, Ján KMEC and P MICHAL. Microhardness of the coatings created by anodic oxidation of aluminium. Applied Mechanics and Materials. Trans Tech Publications, 2013, No 308, p. 95-100. ISSN 1660-9336.
-
ONDERKA, Filip, Ondřej KLANICA, David DOBROCKÝ and Jaromír KADLEC. Reasons of Total Endoprosthesis Failure. Online. In Vondrák Jiří, Sedlaříková Marie. ABAF : 14th International Conference Advanced Batteries, Accumulators and Fuel Cells. 1. vyd. Brno: VUT Brno, 2013, p. 111-114. ISBN 978-80-214-4767-7.
-
BADIDA, M, M GOMBÁR, Ján KMEC, L SOBOTOVÁ, A VAGASKÁ and P MICHAL. Study of the influence of chemical composition of the electrolyte on microhardness of the layer formed by anodic oxidation of Aluminium. Chemicke Listy. Czech Society of Chemical Engineering, 2013, vol. 107, No 12, p. 973-977, 4 pp. ISSN 0009-2770.
-
JOSKA, Zdeněk, Jaromír KADLEC, Ondřej KLANICA, Jan TOMÁŠTÍK and Emil SVOBODA. Testing of DLC Coating on Plasma Nitrided Austenitic Stainless Steel. Online. In Vondrák Jiří, Sedlaříková Marie. ABAF : 14th International Conference Advanced Batteries, Accumulators and Fuel Cells. 1. vyd. Brno: VUT FEKT Brno, 2013, p. 109-110. ISBN 978-80-214-4767-7.
-
RUSNÁKOVÁ, Soňa, Daniel KUČERKA, Roman HRMO, Štefan HUSÁR, Monika KUČERKOVÁ and Vladimír RUSNÁK. Vacuum infusion - an excellent tool for studying of composites. Media4u Magazine. Ing. Jan Chromý, PhD., 2013, roč. 10, Mimořádné vydání - MVVTP 2013, p. 55-59. ISSN 1214-9187.
-
RUSNÁKOVÁ, Soňa, Daniel KUČERKA, Roman HRMO, Štefan HUSÁR, Monika KUČERKOVÁ and Vladimír RUSNÁK. Vákuová infúzia - Výborný nástroj pri výučbe kompozitov (Vacuum infusion - An Excellent Tool for Studiyng of Copmposites). In Modernizace vysokoškolské výuky technických předmětů : sborník anotací. 2013. ISBN 978-80-7435-252-2.
-
KMEC, Ján, Lýdia SOBOTOVÁ, Ján DOBROVIČ, L`uba BIČEJOVÁ and Miroslav GOMBÁR. Categories of Hydroerosion Factors. 1. vyd. Lüdenscheid: RAM - Verlag, 2012, 153 pp. ISBN 978-3-942303-11-8.
2024
2023
2022
2021
2020
2019
2016
2015
2014
2013
2012
Displayed: 25/12/2024 19:29