Publication Records

MAJERNÍKOVÁ, Michaela; Ján MAJERNÍK; Martin PODAŘIL and Jan KOLÍNSKÝ. HIGH-PRESSURE DIE CASTS GATING SYSTEM NUMERICAL DESIGN METHODOLOGY ASSESSMENT WITH REGARD TO HYDRODYNAMIC CONDITIONS IN THE MELT FLOW. MM SCIENCE JOURNAL. Prague: MM Science, 2025, vol. 2025, No 3, p. 8136 - 8146. ISSN 1803-1269.

MAJERNÍKOVÁ, Michaela; Ján MAJERNÍK; Martin PODAŘIL and Karel SRAMHAUSER. METHODOLOGY ASSESSMENT OF THE GATING SYSTEM NUMERICAL DESIGN OF HIGH-PRESSURE DIE CASTING WITH REGARD TO THE MATERIAL APPLICABILITY. MM SCIENCE JOURNAL. Prague: MM Science, 2024, vol. 2024, No 12, p. 8033 - 8043. ISSN 1803-1269.

MAJERNÍK, Ján and Martin PODAŘIL. The Piston Velocity Impact on the Filling Chamber Wave Formation of High Pressure Die Casting Machine in 1st Phase of Casting Cycle. International journal of advanced manufacturing technology. London: Springer, 2023, vol. 23, No 4, p. 495-503. ISSN 0268-3768.

GAŠPÁR, Gašpár; Ján MAJERNÍK; Mirosław TUPAJ and Martin PODAŘIL. COMPARISON OF POROSITY OF CASTS PRODUCED BY HPDC AND VPDC TECHNOLOGIES. MM SCIENCE JOURNAL. Prague: MM Science, PRIPOCNI 1519-10A, PRAGUE 10 10100, CZECH REPUBLIC, 2022, 2022/2022, neuvedeno, p. 5566-5570. ISSN 1803-1269.

GAŠPÁR, Štefan; Ján MAJERNÍK; Andrzej TRYTEK; Martin PODAŘIL and Zuzana BEŇOVÁ. The Effect of the Return Material Implementation into the Production of Silumin Casts on Technological and Economic Indicators of Production Process 1. Archives of Foundry Engineering. WARSZAWA, Poland: Polska Akademia Nauk, 2022, vol. 22, No 1, p. 69-76. ISSN 1897-3310.

GAŠPÁR, Štefan; Ján MAJERNÍK and Jan KOLÍNSKÝ. Analysis of causes of porosity change of castings under the influence of variable biscuit height in the filling chamber. Materials. BASEL, SWITZERLAND: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2021, vol. 14, No 22, p. nestránkováno, 12 pp. ISSN 1996-1944.

MAJERNÍK, Ján; Štefan GAŠPÁR; Ján PAŠKO and Tomáš CORANIČ. DESIGN OF CASTING AND GATING SYSTEMS – PRIMARY PREDICTION OF QUALITY OF DIE CASTING COMPONENTS. First. Lüdenscheid - Germany: RAM-Verlag, 2021, 108 pp. ISBN 978-3-96595-014-6.

MAJERNÍK, Ján; Gašpár ŠTEFAN; Martin PODAŘIL and Coranič TOMÁŠ. EVALUATION OF THERMAL CONDITIONS AT CAST-DIECASTING MOLD INTERFACE. MM SCIENCE JOURNAL. PRIPOCNI 1519-10A, PRAGUE 10, 10100, CZE: MM SCIENCE, 2020, vol. 2020, November 2020, p. 4112-4118. ISSN 1803-1269.

MAJERNÍK, Ján; Štefan GAŠPÁR; Ján KMEC; Monika KARKOVÁ and Jozef MAŠČENÍK. Possibility of Utilization of Gate Geometry to Modify the Mechanical and Structural Properties of Castings on the Al-Si Basis. Materials. BASEL: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2020, vol. 13, No 16, p. nestránkováno, 2 pp. ISSN 1996-1944. Available from: https://doi.org/10.3390/MA13163539.

M., Tupaj; Trytek A.; Łysiak K.; Zbyrad-Kołodziej W.; Łaczek A. and Ján MAJERNÍK. The use of concentrated heat stream to repair AlZn10Si8Mg alloy castings. Manufacturing Technology. Usti nad Labem: J. E. Purkyne University in Usti nad Labem, 2020, Volume 20, No 3, p. 401-408. ISSN 1213-2489. Available from: https://doi.org/10.21062/mft.2020.027.

MAJERNÍK, Ján and Štefan GAŠPÁR. Analysis of Interaction between Position of Gate and Selected Properties of Low-Weight Casts on the Silumin Basis. Archives of Foundry Engineering. Warszawa: POLSKA AKAD NAUK, POLISH ACAD SCIENCES, PL DEFILAD 1, 2019, vol. 19, No 3, p. 106-110. ISSN 1897-3310. Available from: https://doi.org/10.24425/afe.2019.129619.

MAJERNÍK, Ján and Martin PODAŘIL. Evaluation of the Temperature Distribution of a Die Casting Mold of X38CrMoV5_1 Steel. Archives of Foundry Engineering. Warszawa: POLSKA AKAD NAUK, POLISH ACAD SCIENCES, PL DEFILAD 1, 2019, vol. 19, No 2, p. 107-112. ISSN 1897-3310. Available from: https://doi.org/10.24425/afe.2019.127125.

MAJERNÍK, Ján and Martin PODAŘIL. Influence of runner geometry on the gas entrapment in volume of pressure die cast. Archives of Foundry Engineering. Warszawa: Polish Academy of Sciences, 2019, vol. 19, No 3, p. 33-38. ISSN 1897-3310. Available from: https://doi.org/10.24425/afe.2019.129626.

MAJERNÍK, Ján; Štefan GAŠPÁR; Martin PODAŘIL and Jan KOLÍNSKÝ. Optimization of the Runner Numerical Design Dimensions using the Simulation Program. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2019, vol. 19, No 2, p. 273 - 279. ISSN 1213-2489.

MAJERNÍK, Ján. PROBLEMATIKA NÁVRHU VTOKOVÝCH SOUSTAV PERMANENTNÍCH FOREM PRO LITÍ KOVŮ POD TLAKEM (The issue of the gating system design for permanent dies). 1st ed. Stalowa Wola, Poľsko: Wydawnictwo Sztafeta Sp. z o.o., 2019, 94 pp. ISBN 978-83-63767-63-1.

MAJERNÍK, Ján; Štefan GAŠPÁR; Ján PAŠKO; Jozef HUSÁR; Andrzej TRYTEK and Miroslaw TUPAJ. TECHNOLOGIE A TECHNIKA LITÍ KOVŮ POD TLAKEM (PRESSURE METHODS AND METAL FORMING OF METALS). 1st ed. Brno: Tribun EU s.r.o., 2019, 170 pp. Vysokoškolská učebnice. ISBN 978-80-263-1553-7.

MAJERNÍK, Ján; Štefan GAŠPÁR; Martin PODAŘIL and Jan KOLÍNSKÝ. The influence of the Gate Geometry on Selected Process Parameters in the High Pressure Die Casting Technology. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2019, vol. 19, No 1, p. 101-106. ISSN 1213-2489.

PANDA, Anton; Kostiantyn DYADYURA; Petro P. SAVCHUK; Vitalii KASHYTSKYI; Viktoria MALETS; Jan VALÍČEK; Marta HARNIČÁROVÁ; Iveta PANDOVÁ; Lukáš ANDROVIČ and Milena KUŠNEROVÁ. The results of theoretical and experimental studies of tribotechnical purposes composites on the basis of epoxy composite material. MM Science Journal. Czech Republic: MM publishing Ltd., 2019, vol. 2019, December, p. 3509-3518. ISSN 1803-1269. Available from: https://doi.org/10.17973/MMSJ.2019_12_2019032.

MAJERNÍK, Ján; Štefan GAŠPÁR; Karel GRYC and Ladislav SOCHA. Changes in Eutectic Silumin Structure Depending on Gate Geometry and Its Effect on Me-chanical Properties of Casting. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2018, vol. 18, No 3, p. 439-443. ISSN 1213-2489.

GASPAR, Stefan; Jan PASKO and Ján MAJERNÍK. Analysis of Change of Cast Macrostructure under Influence of Structural Adjustments of Ingate and its Impact upon Mechanical Properties. TEM Journal. Serbia: UIKTEN - Association for Information Communication Technology Education and Science., 2017, vol. 6, No 2, p. 358-362. ISSN 2217-8309. Available from: https://doi.org/10.18421/TEM62-22.

MAJERNÍK, Ján; Ján KMEC; Miroslav GOMBÁR and Michal HALAPPI. Analysis of influence dimensions of the gate on the homogeneity of the low weight castings made of silumin. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2017, vol. 17, No 4, p. 499-502. ISSN 1213-2489.

MAJERNÍK, Ján; Ján KMEC and Monika KARKOVÁ. Analysis of the Impact of the Construction of a Gate on the Macroscopic Structure of a Casting and Its Influence on the Mechanical Properties of Castings. Manufacturing Technology. Ústí nad Labem: Univerzita J. E. Purkyne, 2017, Vol. 17, No. 1, p. 62-65. ISSN 1213-2489.

MAJERNÍK, Ján; Monika KARKOVÁ and Ján KMEC. Assessment of suitability of the design of gating system with the use of simulation software. Key Engineering Materials. Switzerland: Trans Tech Publications, 2017, Neuveden, september 2017, p. 136-141. ISSN 1013-9826.

GAŠPÁR, Štefan; Ján PAŠKO and Ján MAJERNÍK. Influence of structure adjustnemt of gating system of casting mould upon the quality of die cast. první. Lüdenscheid, Germany: RAM - Verlag, 2017, 82 pp. 1. ISBN 978-3-942303-47-7.

MAJERNÍK, Ján; Štefan GAŠPÁR and Tomáš CORANIČ. Kritická dĺžka vtokového kanála ako limitujúci faktor návrhu vtokového systému (Critical length of the runner as a limiting factor design of the gating system). In Ing. Jozef Husár, PhD. MANAGEMENT OF MANUFACTURING SYSTEMS 2017. 1st ed. Košice: Technická univerzita v Košiciach, 2017, p. 93-99. ISBN 978-80-553-2660-3.

MAJERNÍK, Ján; Ján KMEC; Miroslav GOMBÁR and Martin PODAŘIL. The use of simulation programmes for the structural analysis and engineering optimization of gating system structures for use with high pressure die casting technology. Manufacturing Technology. Ústí nad Labem: Univerzita J. E. Purkyne, 2017, Vol. 17, No. 3, p. 343-347. ISSN 1213-2489.

MAJERNÍK, Ján. VPLYV PODMIENOK KRYŠTALIZÁCIE NA MAKROŠTRUKTÚRU A POVRCHOVÚ TVRDOSŤ ODLIATKOV (Influence of crystallization conditions on macrostructure and surface hardness of castings). Mladá veda. Prešov: Vydavateľstvo UNIVERSUM, spol. s r. o., 2017, vol. 5, No 7, p. 45-52. ISSN 1339-3189.