Your selection contains 93 outcomes. Edit selection.
Filter publications
-
KADNÁR, Milan, Peter KÁČER, Marta HARNIČÁROVÁ, Jan VALÍČEK, František TÓTH, Marián BUJNA, Milena KUŠNEROVÁ, Rastislav MIKUŠ and Marian BORŽAN. Comparison of Linear Regression and Artificial Neural Network Models for the Dimensional Control of the Welded Stamped Steel Arms. Mathematical machines and systems. Ukrajina: Institute of Mathematical Machines and Systems of the NAS of Ukraine, 2023, vol. 11, No 3, p. 1-18. ISSN 1028-9763.
-
DANEL, Roman, Marta HARNIČÁROVÁ, Walid KHALILIA, Zuzana PALKOVÁ, Khalid HARDAN, Talat ABURAJABALTAMIMI, Yahya ISTAITIH, Jan VALÍČEK and Michal ŘEPKA. ERASMUS+ PROJECT 'BENEFIT' - BOOSTING INNOVATION IN DIGITAL FARMING. In Doucek Petr; Sonntag Michael; Nedomova Lea. IDIMT-2023. Hradec Králové: Trauner Verlag Universitat, 2023, p. 169-176. ISBN 978-3-99151-176-2. Available from: https://dx.doi.org/10.35011/IDIMT-2023-169.
-
KOPAL, Ivan, Ivan LABAJ, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Hakan TOZAN. Intelligent Modelling of the Real Dynamic Viscosity of Rubber Blends Using Parallel Computing. Polymers. Basel, Switzerland: MDPI, 2023, vol. 15, No 17, p. 1-20. ISSN 2073-4360.
-
ŠAFÁŘ, Marek, Jan VALÍČEK, Marta HARNIČÁROVÁ, Michal ŠAJGALÍK, Hakan TOZAN, Milena KUŠNEROVÁ, Mário DRBÚL, Milan KADNÁR and Andrej CZÁN. Proposal for the identification of residual stresses after turning and hardening of bearing steel. Frontiers in Materials. LAUSANNE , SWITZERLAND: Frontiers Media S.A, 2023, vol. 10, Neuveden, p. 1-17. ISSN 2296-8016.
-
VALÍČEK, Jan, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Zuzana PALKOVÁ, Ivan KOPAL, Cristina BORZAN, Andrej CZÁN, Rastislav MIKUŠ, Stanislaw DUER and Vladimír ŠEPÁLEK. Stress-strain parameter prediction method for AWJ technology from surface topography. International journal of advanced manufacturing technology. London, United Kingdom: Springer, 2023, vol. 127, 5-6, p. 2617-2635. ISSN 0268-3768.
-
LABAJ, Ivan, Petra SKALKOVÁ, Ivan KOPAL, Júlia VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Peter BOŠKO and Jana DOBROVSKÁ. Study of the influence of Chitosan on selected properties of elastomeric blends. Materialwissenschaft und Werkstofftechnik. Verlag Wiley-VCH, 2023, vol. 54, No 4, p. 429-440. ISSN 0933-5137.
-
KOPAL, Ivan, Ivan LABAJ, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Darina ONDRUŠOVÁ, Jan KRMELA and Zuzana PALKOVÁ. A Generalized Regression Neural Network Model for Predicting the Curing Characteristics of Carbon Black-Filled Rubber Blends. Polymers. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, vol. 14, No 4, p. nestránkováno, 18 pp. ISSN 2073-4360.
-
PANDA, Anton, Volodymyr NAHORNYI, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Petr BARON, Iveta PANDOVÁ and Patrik SOROČIN. A novel method for online monitoring of surface quality and predicting tool wear conditions in machining of materials. The International Journal of Advanced Manufacturing Technology. Londýn, Spojené království: SPRINGER LONDON LTD, 2022, vol. 123, No 5, p. 3599-3612, 88 pp. ISSN 0268-3768.
-
PANDA, Anton, Kostiantyn DYADYURA, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Tatyana IVAKHNIUK, Liudmyla HREBENYK, Oleksandr SAPRONOV, Vitalii SOTSENKO, Pavlo VOROBIOV, Vitalii LEVYTSKYI, Andriy BUKETOV and Iveta PANDOVA. Ecotoxicity Study of New Composite Materials Based on Epoxy Matrix DER-331 Filled with Biocides Used for Industrial Applications. Polymers. Basel, Switzerland: MDPI, 2022, 14/2022, No 16, p. 3275-3302. ISSN 2073-4360.
-
CZÁN, Andrej, Richard JOCH, Michal ŠAJGALÍK, Jozef HOLUBJÁK, Andrej HORÁK, Pavol TIMKO, Jan VALÍČEK, Milena KUŠNEROVÁ and Marta HARNIČÁROVÁ. Experimental Study and Verification of New Monolithic Rotary Cutting Tool for an Active Driven Rotation Machining. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 5, p. nestránkováno, 17 pp. ISSN 1996-1944.
-
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Stanislaw DUER, Milena KUŠNEROVÁ, Zuzana PALKOVÁ and Zuzana MITAĽOVÁ. Express diagnostics of stress-strain states of materials. Materialwissenschaft und Werkstofftechnik. Weinheim, Germany: Verlag Wiley-VCH, 2022, 53/2022, No 4, p. 394-401. ISSN 0933-5137.
-
KOVÁČ, Ivan, Rastislav MIKUŠ, Jozef ŽARNOVSKÝ, Róbert DRLIČKA, Marta HARNIČÁROVÁ, Jan VALÍČEK and Milan KADNÁR. Increasing the wear resistance of surface layers of selected steels by TIG electric arc surface remelting process using a powder based on CaCN2. The International Journal of Advanced Manufacturing Technology. Londýn, Spojené království Velké Británi: SPRINGER LONDON LTD, 2022, vol. 123, No 5, p. 1985-1997, 14 pp. ISSN 0268-3768.
-
NAHORNYI, Volodymyr, Anton PANDA, Jan VALÍČEK, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, Iveta PANDOVÁ, Stanislaw LEGUTKO, Zuzana PALKOVÁ and Ondrej LUKÁČ. Method of Using the Correlation between the Surface Roughness of Metallic Materials and the Sound Generated during the Controlled Machining Process. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 3, p. nestránkováno, 22 pp. ISSN 1996-1944.
-
PALKOVÁ, Zuzana, Marta HARNIČÁROVÁ, Jan VALÍČEK, Vojtěch STEHEL, Walid Mahmoud KHALILIA, Nikolay MIHAILOV, Maria FRAGKAKI and Aziz Abdel Karim Awad SALAMEH. Perspective of education in Agriculture 4.0 in selected countries in European Union and Palestine. Online. In Boris Evstatiev. 2022 8th International Conference on Energy Efficiency and Agricultural Engineering, EE and AE 2022. 8th ed. Ruse, Bulgaria: Institute of Electrical and Electronics Engineers Inc. (IEEE), 2022, p. nestránkováno, 677 pp. ISBN 978-1-6654-0709-0.
-
GAVLAS, Martin, Michal KACO, Vladimir DEKÝŠ, Miroslav ŠPIRIAK, Silvia SLABEJOVÁ, Andrej CZÁN, Jozef HOLUBJAK, Milena KUŠNEROVÁ, Marta HARNIČÁROVÁ and Jan VALÍČEK. Research on the Oscillation in Centerless Grinding Technology When Machining Bearing Steel. Materials. Basel, Switzerland: MDPI, 2022, neuveden, 15/2022, p. nestránkováno, 14 pp. ISSN 1996-1944.
-
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Ivan KOPAL, Miloslav LUPTÁK, Rastislav MIKUŠ, Zdeněk PAVELEK, Martin FABIÁN and Vladimír ŠEPEĽÁK. Structural and Mechanical Changes of AlMgSi0.5 Alloy during Extrusion by ECAP Method. Materials. Basel, Switzerland: MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, 15/2022, No 6, p. nestránkováno, 22 pp. ISSN 1996-1944.
-
KHALILIA, Walid, Miroslav GOMBÁR, Zuzana PALKOVÁ, Michal PALKO, Jan VALÍČEK and Marta HARNIČÁROVÁ. Using Virtual Reality as Support to the Learning Process of Forensic Scenarios. IEEE Access. New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2022, vol. 2022, neuvedeno, p. 83297-83310. ISSN 2169-3536.
-
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Zuzana PALKOVÁ, Ivan KOPAL, Cristina BORZAN, Milan KADNÁR and Stanislav PAULOVIČ. A New Method of Predicting the Structural and Mechanical Change of Materials during Extrusion by the Method of Multiple Plastic Deformations. Materials. Basel, Switzerland: MDPI, 2021, volume 14, No 10, p. 2594-2616. ISSN 1996-1944.
-
KUŠNEROVÁ, Milena, Michal ŘEPKA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Roman DANEL and Zuzana PALKOVÁ. A study of the connection between bending stress and belt friction using a servomotor controlled by a computer. IEEE Access. IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2021, vol. 9, No 2021, p. 11173-11182. ISSN 2169-3536. Available from: https://dx.doi.org/10.1109/ACCESS.2021.3049971.
-
DARIN, G., K. IMAKUMA, R.T. SANTIAGO, K.L. DA SILVA, L.F. CÓTICA, M. FABIÁN, Jan VALÍČEK, H. HAHND and Vladimír ŠEPEĽÁK. Disordered Gd6UO12-δ with the cation antisite defects prepared by a combined mechanochemical−thermal method. Journal of Nuclear Materials. AMSTERDAM, NETHERLANDS: ELSEVIER, 2021, 549/2021, June 2021, p. 152895-152900. ISSN 0022-3115.
-
FABIAN, Martin, Dirk MENZEL, Anatoly Ye YERMAKOV, Hristo KOLEV, Maria KAŇUCHOVÁ, Jianmin SHI, Jaroslav KOVÁČ, Nina KOSTOVA, Da Silva KLEBSON L., Senna MAMORU, Marta HARNIČÁROVÁ, Jan VALÍČEK, Hahn HORST and Vladimír ŠEPEĽÁK. Nanostructure and magnetic anomaly of mechanosynthesized Ce1-xYxO2-delta (x <= 0.3) solid solutions. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS. Neuveden: PERGAMON-ELSEVIER SCIENCE LTD, 2021, vol. 148, January, p. 1-7. ISSN 0022-3697. Available from: https://dx.doi.org/10.1016/j.jpcs.2020.109673.
-
KADNÁR, Milan, Peter KÁČER, Marta HARNIČÁROVÁ, Jan VALÍČEK, Mirek GOMBÁR, Milena KUŠNEROVÁ, František TÓTH, Marian BORŽAN and Juraj RUSNÁK. Prediction Model of the Resulting Dimensions of Welded Stamped Parts. Materials. Basel, Switzerland: MDPI, 2021, volume 14/, No 11, p. 3062-3078. ISSN 1996-1944.
-
DARIN, Gaspar, Kengo IMAKUMA, Rafael Trautwein SANTIAGO, Klebson Lucenildo DA SILVA, Luiz Fernardo CÓTICA, Martin FABIÁN, Jan VALÍČEK, Horst HAHN and Vladimír ŠEPEĽÁK. X-ray diffraction and thermoanalytical datasets of precursors of the Gd6UO12-δ phase processed by combined mechanochemical−thermal routes. Data in Brief. Netherlands: Elsevier BV, 2021, volume 35, April 2021, p. 106972-106977. ISSN 2352-3409.
-
KUŠNEROVÁ, Milena, Michal ŘEPKA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Roman DANEL, Ján KMEC and Zuzana PALKOVÁ. A new way of measuring the belt friction coefficient using a digital servomotor. Measurement: Journal of the International Measurement Confederation. Netherlands: Elsevier B.V., 2020, vol. 150, January 2020, p. nestránkováno, 2 pp. ISSN 0263-2241. Available from: https://dx.doi.org/10.1016/j.measurement.2019.107100.
-
PANDOVÁ, Iveta, Miroslav RIMÁR, Anton PANDA, Jan VALÍČEK, Milena KUŠNEROVÁ and Marta HARNIČÁROVÁ. A Study of Using Natural Sorbent to Reduce Iron Cations from Aqueous Solutions. International Journal of Environmental Research and Public Health. Basel: MDPI, 2020, vol. 17, No 10, p. 1-17. ISSN 1660-4601. Available from: https://dx.doi.org/10.3390/ijerph17103686.
-
SKURIKHINA, O., M. SENNA, M. FABIÁN, R. WITTE, R. TARASENKO, V. TKÁČ, M. ORENDÁČ, M. KAŇUCHOVÁ, V. GIRMAN, E. TÓTHOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK and Vladimír ŠEPEĽÁK. A sustainable reaction process for phase pure LiFeSi2O6 with goethite as an iron source. Ceramics International. Nizozemsko: Elsevier Ltd, 2020, vol. 46, No 10, p. 14894-14901. ISSN 0272-8842. Available from: https://dx.doi.org/10.1016/j.ceramint.2020.03.016.
-
MAROUŠEK, Josef, Otakar STRUNECKÝ, Ladislav KOLÁŘ, Marek VOCHOZKA, Marek KOPECKÝ, Anna MAROUŠKOVÁ, Jana BATT, Milos POLIAK, Miloslav SOCH, Petr BARTOŠ, Tomáš KLIEŠTIK, Martin FILIP, Petr KONVALINKA, Jan MOUDRÝ, Jiří PETERKA, Karel SUCHÝ, Tomáš ZOUBEK and Edmond CERA. Advances in nutrient management make it possible to accelerate biogas production and thus improve the economy of food waste processing. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS. Philadelphia: Taylor and Francis Inc., 2020, neuveden, Jun 2020, p. 1-10, 11 pp. ISSN 1556-7036.
-
MAROUŠEK, Josef, Petr BARTOŠ, Martin FILIP, Ladislav KOLÁŘ, Petr KONVALINA, Anna MAROUŠKOVÁ, Jan MOUDRÝ, Jiří PETERKA, Jiří ŠÁL, Miloslav ŠOCH, Vojtěch STEHEL, Otakar STRUNECKÝ, Karel SUCHÝ, Marek VOCHOZKA, Jaromír VRBKA and Tomáš ZOUBEK. Advances in the agrochemical utilization of fermentation residues reduce the cost of purpose-grown phytomass for biogas production. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. Philadelphia: Taylor & Francis, 2020, Neuveden, March, p. 1 - 11. ISSN 1556-7036.
-
PANDA, Anton, Volodymyr NAHORNYI, Jan VALÍČEK, Marta HARNIČÁROVÁ, Iveta PANDOVÁ, Cristina BORZAN, Samuel CEHELSKÝ, Lukas ANDROVIČ, Hakan TOZAN and Milena KUŠNEROVÁ. Application of cardio-forecasting for evaluation of human—operator performance. International Journal of Environmental Research and Public Health. Švýcarsko: Multidisciplinary Digital Publishing Institute (MDPI), 2020, vol. 17, No 1, p. nestránkováno, 12 pp. ISSN 1661-7827. Available from: https://dx.doi.org/10.3390/ijerph17010326.
-
KRMELOVÁ, Vladimíra, Ivan KOPAL, Mária GAVENDOVÁ, Ivan LABAJ, Ján KRMELA, Marta HARNIČÁROVÁ, Jan VALÍČEK, Peter HYBLER and Tomáš ZATROCH. A Study of the Effect of the Quinacridone Pigment Content and Storage Time on the Process of Crystallization of Pre-oriented Polypropylene/Quinacridone Fibres. Advanced Structured Materials. Switzerland: Springer, 2020, vol. 124, No 2020, p. 321-336. ISSN 1869-8433. Available from: https://dx.doi.org/10.1007/978-3-030-39062-4_26.
-
KOPAL, Ivan, Juliána VRŠKOVÁ, Marta HARNIČÁROVÁ, Jan VALÍČEK, Darina ONDRUŠOVÁ, Ján KRMELA and Peter HYBLER. ATR-FTIR Analysis of Melamine Resin, Phenol-Formaldehyde Resin and Acrylonitrile-Butadiene Rubber Blend Modified by High-Energy Electron Beam Radiation. Advanced Structured Materials. Switzerland: Springer, 2020, vol. 124, No 2020, p. 295-307. ISSN 1869-8433. Available from: https://dx.doi.org/10.1007/978-3-030-39062-4_24.
-
CERA, Gentjan, Jaroslav BELAS, Josef MAROUŠEK and Edmond CERA. Do size and age of small and medium-sized enterprises matter in corporate social responsibility? Economics and Sociology. Szcecin: Centre of Sociological Research, 2020, vol. 13, No 2, p. 86-99. ISSN 2071-789X. Available from: https://dx.doi.org/10.14254/2071-789X.2020/13-2/6.
-
MITAL'OVA, Zuzana, Dusan MITAL, Frantisek BOTKO, Juliana LITECKA, Jozef ZAJAC, Marta HARNIČÁROVÁ and Jan VALÍČEK. Identification of Topography of Surfaces Created by Turning Biomaterials with Optical Profilometry. BIORESOURCES. Neuveden: NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI, 2020, vol. 15, No 2, p. 2483 - 2494. ISSN 1930-2126. Available from: https://dx.doi.org/10.15376/biores.15.2.2483-2494.
-
KOPECKÝ, Marek, Jiří PETERKA, Ladislav KOLÁŘ, Petr KONVALINA, Josef MAROUŠEK, Radka VÁCHALOVÁ, Marcel HEROUT, Otakar STRUNECKÝ, Jana BATT and Dang Khoa TRAN. Influence of selected maize cultivation technologies on changes in the labile fraction of soil organic matter sandy-loam cambisol soil structure. Soil and Tillage Research. Amsterdam: Elsevier, 2020, vol. 207, March, p. 1 - 6. ISSN 0167-1987.
-
KMEC, Ján, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, Roman DANEL and Michal ŘEPKA. Metody řízení a plánování produkčních procesů (Methods of management and planning of production processes). 1.ed. Polsko: Wydavnictwo Sztafeta, 2020, 134 pp. ISBN 978-83-954599-9-3.
-
KOPAL, Ivan, Juliana VRŠKOVÁ, Alžběta BAKOŠOVÁ, Marta HARNIČÁROVÁ, Ivan LABAJ, Darina ONDRUŠOVÁ, Jan VALÍČEK and Jan KRMELA. Modelling the Stiffness-Temperature Dependence of Resin-Rubber Blends Cured by High-Energy. Polymers. Basel: MDPI, 2020, vol. 12, No 11, p. 1 - 18. ISSN 2073-4360. Available from: https://dx.doi.org/10.3390/polym12112652.
-
MAROUŠEK, Josef, Ladislav KOLÁŘ, Otakar STRUNECKÝ, Marek KOPECKÝ, Petr BARTOŠ, Anna MAROUŠKOVÁ, Eva CUDLÍNOVÁ, Petr KONVALINA, Miloslav ŠOCH, Jan MOUDRÝ, Radka VANÍČKOVÁ and Jaromír VRBKA. Modified biochars present an economic challenge to phosphate management in wastewater treatment plants. JOURNAL OF CLEANER PRODUCTION. OXFORD, Anglie, VB: ELSEVIER, 2020, 272/2020, nečíslováno, p. nestránkováno, 9 pp. ISSN 0959-6526. Available from: https://dx.doi.org/10.1016/j.jclepro.2020.123015.
-
RECE, Laurentiu, Virgil FLORESCU, Arina MODREA, Victor JEFLEA, Marta HARNIČÁROVÁ, Jan VALÍČEK and Marian BORZAN. Optimization of the 2 1/2 d processing method of complex parts, through a predictive algorithm for controlling the geometric shape deviations resulting from processing. Mathematics. BASEL, SWITZERLAND: MDPI, 2020, vol. 8, No 1, p. nestránkováno, 24 pp. ISSN 2227-7390. Available from: https://dx.doi.org/10.3390/math8010059.
-
BELÁS, Jaroslav, Khuramm Ajaz KHAN, Josef MAROUŠEK and Zoltán ROZSA. Perceptions of the importance of business ethics in SMEs: A comparative study of Czech and Slovak entrepreneurs. Ethics and Bioethics. Sciendo, 2020, vol. 10, 1-2, p. 96-106. ISSN 1338-5615. Available from: https://dx.doi.org/10.2478/ebce-2020-0010.
-
HARNIČÁROVÁ, Marta, Jan VALÍČEK, Milena KUŠNEROVÁ, Ivan KOPAL, Júlia LITECKÁ, Milan KADNÁR, Ján KMEC and Zuzana PALKOVÁ. Prediction of shortening and material grain size after extrusion using the ecap method. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020, vol. 400, No 2020, p. 91-105. ISSN 1012-0386. Available from: https://dx.doi.org/10.4028/www.scientific.net/DDF.400.91.
-
KMEC, Ján, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, Roman DANEL and Michal ŘEPKA. Progresivní technologie produkčních procesů (Progressive technology of production processes). 1st ed. Polsko: Wydavnictwo Sztafeta, 2020, 309 pp. ISBN 978-83-66528-00-0.
-
VALÍČEK, Jan, Marta HARNIČÁROVÁ, Milena KUŠNEROVÁ, M. ŠAJGALÍK, Ján KMEC, I. KOPAL, A. PANDA and Zuzana PALKOVÁ. Reverse reconstruction of surface topography from residual stress after chip-forming machining of the material. Materialwissenschaft und Werkstofftechnik. Německo: Wiley-VCH Verlag, 2020, vol. 51, No 5, p. 579-585. ISSN 0933-5137. Available from: https://dx.doi.org/10.1002/mawe.202000017.
-
MAROUŠEK, Josef, Petr BARTOŠ, Anna MAROUŠKOVÁ, Vojtěch STEHEL and Otakar STRUNECKÝ. Shock Waves for Enhancing Extraction Yield. In Knoerzer, K., Muthukumarappan, K. (Eds.). Innovative Food Processing Technologies: A Comprehensive Review. vol. 3. neuveden: Elsevier, 2020, p. 439-443. ISBN 978-0-12-815781-7.
-
MAROUŠEK, Josef, Anna MAROUŠKOVÁ and Tomáš KŮS. Shower cooler reduces pollutants release in production of competitive cement substitute at low cost. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. Philadelphia: Taylor & Francis, 2020, Neuveden, September, p. 1 - 10. ISSN 1556-7036.
-
MAROUŠEK, Josef, Zuzana ROWLAND, Katarína VALÁŠKOVÁ and Pavol KRÁL. Techno-economic assessment of potato waste management in developing economies. Clean Technologies and Environmental Policy. New York, USA: Springer, 2020, vol. 22, březen, p. 937-944. ISSN 1618-954X. Available from: https://dx.doi.org/10.1007/s10098-020-01835-w.
-
VOCHOZKA, Marek, Zuzana ROWLAND, Petr ŠULEŘ and Josef MAROUŠEK. The influence of the international price of oil on the value of the EUR/USD exchange rate. Journal of Competitiveness. Zlín, Czech Republic: Tomáš Baťa University, 2020, vol. 12, No 2, p. 167-190. ISSN 1804-171X.
-
KMEC, Ján, M. GOMBÁR, Marta HARNIČÁROVÁ, Jan VALÍČEK, Milena KUŠNEROVÁ, J. KŘÍŽ, M. KADNÁR, Monika KARKOVÁ and A. VAGASKÁ. The predictive model of surface texture generated by abrasivewater jet for austenitic steels. Applied Sciences (Switzerland). Switzerland: MDPI AG, 2020, vol. 10, No 9, p. nestránkováno, 22 pp. ISSN 2076-3417. Available from: https://dx.doi.org/10.3390/app10093159.
-
MAROUŠEK, Josef, Vojtěch STEHEL, Marek VOCHOZKA, Anna MAROUŠKOVÁ, Otakar STRUNECKÝ and Ladislav KOLÁŘ. Způsob regenerace fosforu z odpadní vody, zejména z kalové vody (Method of regenerating phosphorus from wastewater, especially from sludge water). 2020.
-
MAROUŠEK, Josef, Otakar STRUNECKÝ and Vojtěch STEHEL. Biochar farming: defining economically perspective applications. Clean Technologies and Environmental Policy. Berlin, Německo: Springer Verlag, 2019, vol. 21, No 7, p. 1389-1395. ISSN 1618-954X. Available from: https://dx.doi.org/10.1007/s10098-019-01728-7.
-
MAROUŠEK, Josef, Vojtěch STEHEL, Marek VOCHOZKA, Ladislav KOLÁŘ, Anna MAROUŠKOVÁ, Otakar STRUNECKÝ, Jiří PETERKA, Marek KOPECKÝ and Sowmya SHREEDHAR. Ferrous sludge from water clarification: Changes in waste management practices advisable. Journal of Cleaner Production. England: Elsevier Ltd, 2019, vol. 218, 01.05.2019, p. 459-464. ISSN 0959-6526. Available from: https://dx.doi.org/10.1016/j.jclepro.2019.02.037.
-
MAROUŠEK, Josef, Vojtěch STEHEL, Marek VOCHOZKA, Anna MAROUŠKOVÁ and Ladislav KOLÁŘ. Biochar reduces nitrate level in red beet. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH. Germany: Springer-Verlag GmbH Germany, part of Springer Nature 2018, 2018, vol. 25, No 18, p. 18200-18203. ISSN 1614-7499.
-
MAROUŠEK, Josef, Vojtěch STEHEL, Anna MAROUŠKOVÁ, Marek VOCHOZKA and Jiří ŠÁL. Lehčená betonová směs (Lightweight concrete mix). 2018.
-
MAROUŠEK, Josef, Vojtěch STEHEL, Marek VOCHOZKA, Anna MAROUŠKOVÁ and Ladislav KOLÁŘ. Postponing of the intracellular disintegration step improves efficiency of phytomass processing. Journal of Cleaner Production. Anglie: ELSEVIER SCI LTD, 2018, vol. 39, No 31, p. 173-176. ISSN 0959-6526.
-
MAROUŠEK, Josef, Vojtěch STEHEL, Anna MAROUŠKOVÁ, Marek VOCHOZKA, Jiří ŠÁL and Jaroslav ŽÁK. Povrchová úprava interiéru pro zlepšení kvality vzduchu a dalších parametrů uvnitř objektu (Interior finishes to improve air quality and other parameters inside the building). 2018.
-
NÝVLT, Vladimír and Kristýna PRUŠKOVÁ. Building Information Management as a Tool for Managing Knowledge throughout whole Building Life Cycle. Online. In Marschalko M.,Drusa M.,Rybak J.,Yilmaz I.,Segalini A.,Coisson E. IOP Conference Series: Materials Science and Engineering. 1. vyd. Spojené království: Institute of Physics Publishing, 2017, p. nestránkováno, 7 pp. ISSN 1757-8981.
-
PRUŠKOVÁ, Kristýna and Vladimír NÝVLT. Issue of Building Information Modelling Implementation into the Czech Republic's Legislation using the Level of Development. Online. In IOP Conference Series: Materials Science and Engineering, Volume 245, Issue 2 (World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2017). 1. vyd. Spojené království: Institute of Physics Publishing, 2017, p. nestránkováno, 7 pp. ISSN 1757-8981.
-
VÁCHALOVÁ, Radka, Josef MAROUŠEK, Ladislav KOLÁŘ, Jiří PETERKA, Marek KOPECKÝ, Zbyněk HAVELKA, Petra PÁRTLOVÁ and Jan VÁCHAL. NITRATES IN BEETROOT AND SODIUM FERTILIZATION. LISTY CUKROVARNICKÉ a ŘEPAŘSKÉ. Praha: LISTY CUKROVARNICKE REPARSKE, V U C PRAHA, A.S., 2017, vol. 133, No 12, p. 386-388. ISSN 1210-3306.
-
MAROUŠEK, Josef, Ladislav KOLÁŘ, Marek VOCHOZKA, Vojtěch STEHEL and Anna MAROUŠKOVÁ. Novel method for cultivating beetroot reduces nitrate content. Journal of Cleaner Production. Anglie: ELSEVIER SCI LTD, 2017, vol. 168, 25. August 2017, p. 60-62. ISSN 0959-6526. Available from: https://dx.doi.org/10.1016/j.jclepro.2017.08.233.
-
PRUŠKOVÁ, Kristýna. The mutual relations between level of development and project documentation stages in Czech Republic’s legislation. In 17th International Multidisciplinary Scientific Geoconference SGEM 2017, Conference proceedings, Volume 17, Nano, bio and green - technologies for sustainable future Issue 62. 1.vyd. Sofia: STEF92 Technology Ltd., 2017, p. 821-826. ISBN 978-619-7408-13-3.
-
KARKOVÁ, Monika, Ján MAJERNÍK, Ján KMEC and Kristýna PRUŠKOVÁ. Use of the water within the waterjet technology. In 17th internatonal multidisciplinary scienctific geoconference SGEM2017. 1st ed. Sofia (Bulharsko): STEF92 Technology, 2017, p. 285-292. ISBN 978-619-7408-06-5.
-
KUČERKA, Daniel, Ondrej STOPKA, Ján KMEC, Monika KARKOVÁ, Miroslav GOMBÁR, Jiří MÍKA, Petr HRUBÝ and Viktorie WEISS. Assessing the Relationship of Mineability of Rocks and Machines for Earthwork. Online. In M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, A. Segalini. World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016 (WMCAUS 2016). Netherlands: Elsevier Ltd., 2016, p. 368-373. ISSN 1877-7058.
-
STOPKA, Ondrej, Rudolf KAMPF and Ján VRÁBEL. Deploying the Means of Transport within the Transport Enterprises in the Context of Emission Standards. In Transport Means 2016. Neuveden: KAUNAS UNIVERSITY OF TECHNOLOGY PRESS, 2016, p. 185-189. ISSN 1822-296X.
-
STOPKA, Ondrej and Rudolf KAMPF. DETERMINING THE MOST SUITABLE LAYOUT OF SPACE FOR THE LOADING UNITS’ HANDLING IN THE MARITIME PORT. Transport. Vilnius: Vilnius Gediminas Technical University, 2016, vol. 33, No 1, p. 280-290. ISSN 1648-4142.
-
MUSÍLEK, Josef, Petr HRUBÝ and Ondrej STOPKA. Diversity of Characteristics of Sandy Soils in Relation to Foundation Engineering (Rozmanitost charakteristik písčitých půd ve vztahu k zakládání staveb). Online. In Yilmaz I. IOP Conference Series: Earth and Environmental Science. [Bristol]: Institute of Physics Publishing, 2016, p. 1-4. ISSN 1755-1315.
-
LIŽBETIN, Ján, Ondrej STOPKA and Vladislav ZITRICKÝ. Dopravní prostředky (Transport Means). 1. vydání. České Budějovice: Vysoká škola technická a ekonomická v Českých Budějovicích, 2016, 155 pp. ISBN 978-80-7468-101-1.
-
STOPKA, Ondrej, Ján PONICKÝ, Mária CHOVANCOVÁ and Vladislav ZITRICKÝ. Draft Method for Determining the Number of Checking Devices Utilized within the Regional Passenger Transport. Nase More. Dubrovnik: University of Dubrovnik, 2016, vol. 63, No 3, p. 200-203. ISSN 0469-6255.
-
VONDRÁČKOVÁ, Terezie, Ján KMEC, Jiří ČEJKA, Ladislav BARTUŠKA and Ondrej STOPKA. Evaluation of the Parameters Affecting the Cohesion of Fine Grained Soil (Vyhodnocení parametrů, které ovlivňují soudržnost jemnozrnných půd). Online. In Yilmaz I. IOP Conference Series: Earth and Environmental Science. neuveden: IOP Publishing Ltd., 2016, p. 1-4, 5 pp. ISSN 1755-1307.
-
STOPKA, Ondrej, Daniel KUČERKA, Rudolf KAMPF, Ján LIŽBETIN, Ladislav BARTUŠKA, Ján KMEC, Miroslav GOMBÁR and Viktorie WEISS. Heavy Machinery Required for the Proper Application of Geosynthetic Products in the Implementation of Transport Constructions. Online. In M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, A. Segalini. World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016 (WMCAUS 2016). Netherlands: Elsevier Ltd., 2016, p. 445-449. ISSN 1877-7058.
-
KAMPF, Rudolf, Ondrej STOPKA, Iveta KUBASAKOVA and Vladimír ZITRICKÝ. Macroeconomic Evaluation of Projects Regarding the Traffic Constructions and Equipment. Online. In M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, A. Segalini. World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016 (WMCAUS 2016). Netherlands: Elsevier Ltd., 2016, p. 1538-1544. ISSN 1877-7058.
-
VRÁBEL, Ján, Ondrej STOPKA, Vladimír RIEVAJ, Branislav ŠARKAN, Kristýna PRUŠKOVÁ and Michalk PHILIP. Measuring the Resistance of Tires for Passenger Vehicle against the rolling and sliding on Loading Area of the Flatbet Truck when providing the Transport Services. Communications : scientific letters of the University of Žilina. Žilina: The University of Žilina, 2016, Volume 18, No 2, p. 124-128. ISSN 1335-4205.
-
LIŽBETIN, Ján, Ondrej STOPKA and František NĚMEC. Methodological Assessment of Environmental Indicators in Combined Transport in Comparison with Direct Road Freight Transport. In Transport Means 2016. KAUNAS, LITHUANIA: KAUNAS UNIVERSITY OF TECHNOLOGY PRESS, 2016, p. 151-155. ISSN 1822-296X.
-
STOPKA, Ondrej, Lenka ČERNÁ and Vladislav ZITRICKÝ. Methodology for Measuring the Customer Satisfaction with the Logistics Services. Nase More. Dubrovnik: University of Dubrovnik, 2016, vol. 63, No 3, p. 189-194. ISSN 0469-6255.
-
LIŽBETIN, Ján and Ondrej STOPKA. PRACTICAL APPLICATION OF THE METHODOLOGY FOR DETERMINING THE PERFORMANCE OF A COMBINED TRANSPORT TERMINAL. Online. In Neuveden. PROCEEDINGS OF THE THIRD INTERNATIONAL CONFERENCE ON TRAFFIC AND TRANSPORT ENGINEERING (ICTTE). BELGRADE, SERBIA: SCIENTIFIC RESEARCH CENTER LTD BELGRADE, 2016, p. 382-387. ISBN 978-86-916153-3-8.
-
STOPKA, Ondrej, Mária CHOVANCOVÁ, Ján LIŽBETIN and Vladimír KLAPITA. Proposal for Optimization of the Inventory Level Using the Appropriate Method for its Procurement. Nase More. Dubrovnik: University of Dubrovnik, 2016, vol. 63, No 3, p. 195-199. ISSN 0469-6255.
-
STOPKA, Ondrej, Rudolf KAMPF, Ján LIŽBETIN and Martina HLATKÁ. Proposal for optimizing the timetables within tram subsystem of urban public transport from the international conception. Online. In prof. Ing. Tomas Kliestik, Ph.D. Globalization and its Socio-economic consequences. Žilina, SR: ZU - UNIVERSITY OF ZILINA, The Faculty of Operation and Economic of Transport and Communications, Department of Economics, 2016, p. 2135-2141. ISBN 978-80-8154-191-9.
-
BARTUŠKA, Ladislav, Ondrej STOPKA, M. CHOVANCOVÁ and Ján LIŽBETIN. Proposal of Optimizing the Transportation Flows of Consignments in the Distribution Center. In Neuveden. Transport Means 2016. KAUNAS, LITHUANIA: KAUNAS UNIVERSITY OF TECHNOLOGY PRESS, 2016, p. 107-111. ISSN 1822-296X.
-
LIŽBETIN, Ján and Ondrej STOPKA. Proposal of the roundabout solution within the particular urban traffic operation. Open Engineering. Varšava, Polsko: De Gruyter Open Ltd., 2016, vol. 6, No 1, p. nestránkováno, 5 pp. ISSN 2391-5439.
-
RIEVAJ, Vladimír, Ondrej STOPKA, Ján VRÁBEL, Lenka MOKŘIČKOVÁ and Conrad SCHMIDT. The Impact of Air Resistance on the Fuel Consumption in Real Conditions within the Transport Operation. Communications : scientific letters of the University of Žilina. Žilina: The University of Žilina, 2016, Volume 18, No 2, p. 57-61. ISSN 1335-4205.
-
LIŽBETIN, Ján, Petr VEJS, Ondrej STOPKA and Václav CEMPÍREK. The Significance of Dynamic Detection of the Railway Vehicles Weight. Nase More. Dubrovnik: University of Dubrovnik, 2016, vol. 63, No 3, p. 156-160. ISSN 0469-6255.
-
NÝVLT, Vladimír, Josef MUSÍLEK, Jiří ČEJKA and Ondrej STOPKA. The Study of Derinkuyu Underground City in Cappadocia Located in Pyroclastic Rock Materials. In M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, A. Segalini. World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016 (WMCAUS 2016). Netherlands: Elsevier Ltd., 2016, p. 2253-2258. ISSN 1877-7058.
-
JEŘÁBEK, Karel, Ondrej STOPKA, Terezie VONDRÁČKOVÁ and Věra VOŠTOVÁ. A technique for seabed mining. Nase More. Dubrovnik: University of Dubrovnik, 2015, vol. 62, No 1, p. 39-43. ISSN 0469-6255. Available from: https://dx.doi.org/10.17818/NM.1.7.2015.
-
LIŽBETIN, Ján, Rudolf KAMPF, Ondrej STOPKA, Ladislav BARTUŠKA and Jiří ČEJKA. Aktuálny stav terminálov intermodálnej prepravy na Slovensku (Current status of intermodal transport terminals in Slovakia). In Horizonty železničnej dopravy 2015 : sborník příspěvků. 1. vyd. Žilina: Žilinská univerzita v Žiline, 2015, p. 143-147. ISBN 978-80-554-1097-5.
-
KAMPF, Rudolf, Ondrej STOPKA, Ladislav BARTUŠKA and Karel ZEMAN. Circulation of vehicles as an important parameter of public transport efficiency. In Transport Means - Proceedings of the 19th International Scientific Conference on Transport Means. 1. vyd. Kaunas (Lithuania): Kaunas University of Technology, 2015, p. 143-146. ISSN 1822-296X.
-
STOPKA, Ondrej, Jiří ČEJKA, Rudolf KAMPF and Ladislav BARTUŠKA. Draft of the novel system of public bus transport lines in the particular territory. In Transport Means - Proceedings of the 19th International Scientific Conference on Transport Means. 1. vyd. Kaunas (Lithuania): Kaunas University of Technology, 2015, p. 39-42. ISSN 1822-296X.
-
SITÁNYIOVÁ, Dana, Terezie VONDRÁČKOVÁ, Ondrej STOPKA, Markéta MYSLIVEČKOVÁ and Juraj MUZIK. GIS Based Methodology for the Geotechnical Evaluation of Landslide Areas. Online. In Marian Drusa, Marian Marschalko, Isik Yilmaz, Andrea Segallini, Anna Maria Ferrero, Martin Bednarik. Procedia Earth and Planetary Science, vol. 15 : The World Multidisciplinary Earth Sciences Symposium, WMESS 2015. Amsterdam: Elsevier, 2015, p. 389-394. ISSN 1878-5220.
-
ŠIMKOVÁ, Ivana, Vladimír KONEČNÝ, Štefan LIŠČÁK and Ondrej STOPKA. Measuring the quality impacts on the performance in transport company. Transport Problems. Katowice (Polsko): Silesian University of Technology, 2015, vol. 10, No 3, p. 113-124. ISSN 1896-0596.
-
BARTUŠKA, Ladislav, Ondrej STOPKA and Ján LIŽBETIN. Methodology for Determining the Traffic Volumes on Urban Roads in the Czech Republic. In Transport Means - Proceedings of the 19th International Scientific Conference on Transport Means. 1. vyd. Kaunas (Lithuania): Kaunas University of Technology, 2015, p. 215-218. ISSN 1822-296X.
-
STOPKA, Ondrej, Ladislav BARTUŠKA and Rudolf KAMPF. Passengers’ evaluation of the integrated transport systems. Nase More. Dubrovnik: University of Dubrovnik, 2015, vol. 62, Special issue, p. 153-157. ISSN 0469-6255. Available from: https://dx.doi.org/10.17818/NM/2015/SI12.
-
STOPKA, Ondrej and Ivana ŠIMKOVÁ. Proposal Of Landfill Site Model In The Particular Territory. Transport and Telecommunication. Riga: Transport and Telecommunication Institute, 2015, vol. 16, No 4, p. 320-329. ISSN 1407-6160. Available from: https://dx.doi.org/10.1515/ttj-2015-0029.
-
GAŠPARÍK, Jozef, Ondrej STOPKA and Lubomír PEČENÝ. Quality evaluation in regional passenger rail transport. Nase More. Dubrovnik: University of Dubrovnik, 2015, vol. 62, Special issue, p. 114-118. ISSN 0469-6255. Available from: https://dx.doi.org/10.17818/NM/2015/SI5.
-
NGUYEN, Giang, Terezie VONDRÁČKOVÁ, Marian DRUSA, Luboš KOVALČÍK and Ondrej STOPKA. Sensibility of Sandy Soils Shear Strength Parameters on a Size of Spread Foundation. Online. In Marian Drusa, Marian Marschalko, Isik Yilmaz, Andrea Segallini, Anna Maria Ferrero, Martin Bednarik. Procedia Earth and Planetary Science, vol. 15 : The World Multidisciplinary Earth Sciences Symposium, WMESS 2015. Amsterdam: Elsevier, 2015, p. 304-308. ISSN 1878-5220.
-
STOPKA, Ondrej, Jozef GAŠPARÍK and Ivana ŠIMKOVÁ. The Methodology of the Customers’ Operation from the Seaport Applying the “Simple Shuttle Problem”. Nase More. Dubrovnik: University of Dubrovnik, 2015, roč. 62, No 4, p. 283-286. ISSN 0469-6255. Available from: https://dx.doi.org/10.17818/NM/2015/4.7.
-
STOPKA, Ondrej, Ivana ŠIMKOVÁ and Vladimír KONEČNÝ. The quality of service in the public transport and shipping industry. Nase More. Dubrovnik: University of Dubrovnik, 2015, vol. 62, Special Issue, p. 126-130. ISSN 0469-6255. Available from: https://dx.doi.org/10.17818/NM/2015/SI7.
2023
2022
2021
2020
2019
2018
2017
2016
2015
Displayed: 29/8/2024 03:12