Filter publications

    2024

    1. Advanced Processes in Metallurgical Technologies
      SATERNUS, Mariola and Ladislav SOCHA. Advanced Processes in Metallurgical Technologies. METALS. BASEL, SWITZERLAND: MDPI, 2024, vol. 14, No 9, p. 1-13. ISSN 2075-4701.
      URL
      Name in Czech: Pokročilé procesy v metalurgických technologiích
      Name (in English): Advanced Processes in Metallurgical Technologies
      RIV/75081431:_____/24:00002827 Article in a journal. English. Switzerland.
      Saternus, Mariola (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: Materials Science; MultidisciplinaryMetallurgy & Metallurgical Engineering
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 2/4/2025 13:11.
      More: https://is.vstecb.cz/publication/74881/en
    2. An Introduction to the Methodology of Quality Monitoring of Zinc Alloy Castings Produced by HPDC in Additively Manufactured Shaped Mould Parts
      KOZA, Kamil, Karel GRYC, Ladislav SOCHA, Martin PINTA, Roman KUBEŠ, Václav SOCHACKÝ, Adnan MOHAMED and Jaromír TROBL. An Introduction to the Methodology of Quality Monitoring of Zinc Alloy Castings Produced by HPDC in Additively Manufactured Shaped Mould Parts. Engineering Proceedings. Basel (Switzerland): Multidisciplinary Digital Publishing Institute (MDPI), 2024, vol. 64, No 1, p. 1-6. ISSN 2673-4591.
      URL
      Name in Czech: Úvod do metodiky sledování kvality odlitků ze zinkových slitin vyrobených pomocí HPDC v aditivně vyráběných tvarových částech
      Name (in English): An Introduction to the Methodology of Quality Monitoring of Zinc Alloy Castings Produced by HPDC in Additively Manufactured Shaped Mould Parts
      RIV/75081431:_____/24:00002818 Article in a journal. English. Switzerland.
      Koza, Kamil (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Pinta, Martin (203 Czech Republic, belonging to the institution) -- Mohamed, Adnan (203 Czech Republic, belonging to the institution)
      Keywords in English: 3D scanning; additive manufacturing; die casting; H11 steel; zinc alloy
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 2/4/2025 13:22.
      More: https://is.vstecb.cz/publication/74901/en
    3. ANALYSIS OF THE INFLUENCE OF THE GATING SYSTEM SHAPE ON THE FILLING AND SOLIDIFICATION OF DUCTILE IRON CASTINGS
      GRYC, Karel, Ladislav SOCHA, Jana SVIŽELOVÁ, Tomáš PRÁŠIL, Ivan HOTOVÝ, Pavel ČÍŽEK and Jan ŠTEFÁNEK. ANALYSIS OF THE INFLUENCE OF THE GATING SYSTEM SHAPE ON THE FILLING AND SOLIDIFICATION OF DUCTILE IRON CASTINGS. Online. In TANGER LTD. METAL 2022 Conference Proceedings. OSTRAVA, CZECH REPUBLIC: TANGER LTD, 2024, p. 78-84, 884 pp. ISSN 2694-9296.
      URL
      RIV: Proceedings paper. English. Czech Republic.
      Gryc, Karel (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: Foundry; ductile iron; numerical simulation; ProCAST; gating system
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 9/4/2025 12:39.
      More: https://is.vstecb.cz/publication/75122/en
    4. Assessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions
      SOCHA, Ladislav, Karel GRYC, Tomáš PRÁŠIL, Jana SVIŽELOVÁ, Mariola SATERNUS, Tomasz MERDER, Jacek PIEPRZYCA and Petr NUSKA. Assessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions. SCIENTIFIC REPORTS. 2024, vol. 14, No 1, p. 1-14. ISSN 2045-2322.
      URL
      Name in Czech: Hodnocení účinnosti rafinace během rafinačního cyklu ve slévárenské odplyňovací jednotce v průmyslových podmínkách
      Name (in English): Assessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions
      RIV/75081431:_____/24:00002690 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
      Socha, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: POROSITY FORMATION; FLUID-FLOW; ALUMINUM; IMPELLER; SIMULATION; ALLOYS
      Changed by: Barbora Kroupová, učo 25655. Changed: 4/6/2024 10:35.
      More: https://is.vstecb.cz/publication/72161/en
    5. Comparison of Degassing Efficiency on a Foundry Degassing Unit Using Different Rotor Types
      KOLÍNSKÝ, Jan, Tomáš PRÁŠIL, Ladislav SOCHA, Jana SVIŽELOVÁ, Karel GRYC, Josef HÄUSLER and Martin DVOŘÁK. Comparison of Degassing Efficiency on a Foundry Degassing Unit Using Different Rotor Types. Applied Sciences. Switzerland: MDPI, 2024, vol. 14, No 5, p. 1-14. ISSN 2076-3417.
      URL
      Name in Czech: Srovnání účinnosti odplynění na odplynění ve slévárně Jednotka s různými typy rotorů
      Name (in English): Comparison of Degassing Efficiency on a Foundry Degassing Unit Using Different Rotor Types
      RIV/75081431:_____/24:00002684 Article in a journal. English. Switzerland.
      Kolínský, Jan (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: aluminium; data processing; degassing; physical modelling; rotor efficiency
      Changed by: Barbora Kroupová, učo 25655. Changed: 4/6/2024 10:37.
      More: https://is.vstecb.cz/publication/72041/en
    6. Design and optimization of a castability test for copper alloys applied to plaster moulds
      RADKOVSKÝ, Filip, František ZLÁMAL, Iveta VASKOVÁ, Martina BAŠISTOVÁ, Petr LICHÝ, Simon KIELAR and Ladislav SOCHA. Design and optimization of a castability test for copper alloys applied to plaster moulds. Heliyon. ENGLAND, CAMBRIDGE: CELL PRESS, 2024, vol. 10, No 11, p. 1-13. ISSN 2405-8440.
      URL
      Name in Czech: Návrh a optimalizace zkoušky slévatelnosti slitin mědi aplikovaných do sádrových forem
      Name (in English): Design and optimization of a castability test for copper alloys applied to plaster moulds
      RIV/75081431:_____/24:00002829 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
      Radkovský, Filip (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: Castability; Lost-wax casting; Plaster mould; Cooper alloy; Technological test
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 2/4/2025 13:56.
      More: https://is.vstecb.cz/publication/74941/en
    7. Design of Conformal Cooling of an Additively Printed Aluminium Die-Casting Mold Component
      SVIŽELOVÁ, Jana, Ladislav SOCHA, Adnan MOHAMED, Martin PINTA, Kamil KOZA, Tomáš SELLNER, Karel GRYC, M. DVOŘÁK and Miloslav ROH. Design of Conformal Cooling of an Additively Printed Aluminium Die-Casting Mold Component. ARCHIVES OF FOUNDRY ENGINEERING. WARSZAWA, POLAND: POLSKA AKAD NAUK, 2024, vol. 24, No 4, p. 1-10. ISSN 1897-3310.
      URL
      Name in Czech: Návrh konformního chlazení aditivně tištěné části formy pro tlakové lití hliníku
      Name (in English): Design of Conformal Cooling of an Additively Printed Aluminium Die-Casting Mold Component
      RIV/75081431:_____/24:00002819 Article in a journal. English. Poland.
      Sviželová, Jana (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Mohamed, Adnan (203 Czech Republic, belonging to the institution) -- Pinta, Martin (203 Czech Republic, belonging to the institution) -- Koza, Kamil (203 Czech Republic, belonging to the institution) -- Sellner, Tomáš (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: HPDC; Conformal cooling; Temperature field; Numerical simulation; Mold design
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 2/4/2025 14:32.
      More: https://is.vstecb.cz/publication/74961/en
    8. Dimensional and Shape Analysis of Additively Manufactured Shaped Parts of DIEVAR Steel Moulds
      SELLNER, Tomáš, Ladislav SOCHA, Karel GRYC, Adnan MOHAMED, Martin PINTA, Jana SVIŽELOVÁ, Kamil KOZA, Martin DVOŘÁK and Miloslav ROH. Dimensional and Shape Analysis of Additively Manufactured Shaped Parts of DIEVAR Steel Moulds. ARCHIVES OF FOUNDRY ENGINEERING. POLAND: POLISH ACAD SCIENCES, 2024, vol. 24, No 3, p. 136-142. ISSN 1897-3310.
      URL
      Name in Czech: Rozměrová a tvarová analýza aditivně vyrobených tvarových částí forem z oceli DIEVAR
      Name (in English): Dimensional and Shape Analysis of Additively Manufactured Shaped Parts of DIEVAR Steel Moulds
      RIV/75081431:_____/24:00002820 Article in a journal. English. Poland.
      Sellner, Tomáš (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Mohamed, Adnan (203 Czech Republic, belonging to the institution) -- Pinta, Martin (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Koza, Kamil (203 Czech Republic, belonging to the institution)
      Keywords in English: additive manufacturing; DIEVAR steel; dimensional analysis; shape analysis
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 2/4/2025 14:43.
      More: https://is.vstecb.cz/publication/74981/en
    9. INFLUENCE OF THE CHILL SIZE ON THE POROSITY FORMATION IN DUCTILE IRON CASTING
      SOCHA, Ladislav, Filipek SZYMON, Karel GRYC, Jana SVIŽELOVÁ, Miroslav CHMIEL, Petra FRONKOVÁ and Petr NOVÁK. INFLUENCE OF THE CHILL SIZE ON THE POROSITY FORMATION IN DUCTILE IRON CASTING. Online. In TANGER LTD. METAL 2022 Conference Proceedings. OSTRAVA, CZECH REPUBLIC: TANGER LTD, 2024, p. 149-155, 884 pp. ISSN 2694-9296.
      URL
      RIV: Proceedings paper. English. Czech Republic.
      Socha, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: Metallurgy; casting; ductile iron; numerical simulation; MAGMASOFT
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 9/4/2025 14:17.
      More: https://is.vstecb.cz/publication/75181/en
    10. INTRODUCTION TO THE METHODOLOGY OF THE STUDY OF OPERATIONAL WEAR OF EXPERIMENTAL SHAPED PARTS OF MOULDS FOR HPDC OF ZINC ALLOYS
      KOZA, Kamil, Karel GRYC, Ladislav SOCHA, Martin PINTA, Roman KUBEŠ, Václav SOCHACKÝ, Adnan MOHAMED and Jaromír TROBL. INTRODUCTION TO THE METHODOLOGY OF THE STUDY OF OPERATIONAL WEAR OF EXPERIMENTAL SHAPED PARTS OF MOULDS FOR HPDC OF ZINC ALLOYS. Online. In Tanger Ltd. METAL 2023 Conference Proceedings. OSTRAVA, CZECH REPUBLIC: Tanger Ltd., 2024, p. 114-120, 717 pp. ISSN 2694-9296.
      URL
      RIV: Proceedings paper. English. Czech Republic.
      Koza, Kamil (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Pinta, Martin (203 Czech Republic, belonging to the institution) -- Mohamed, Adnan (203 Czech Republic, belonging to the institution)
      Keywords in English: H11 steel; additive manufacturing; mould parts; wear; 3D scanning; CMM; roughness; zinc alloy; die casting
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 10/4/2025 11:06.
      More: https://is.vstecb.cz/publication/75321/en
    11. OPTIMIZATION OF NUMERICAL SIMULATIONS OF GRAVITY CASTING OF DUCTILE IRON CASTINGS
      GRYC, Karel, Ladislav SOCHA, Jana SVIŽELOVÁ, Tomáš PRÁŠIL, Ivan HOTOVÝ, Pavel ČÍŽEK and Jan ŠTEFÁNEK. OPTIMIZATION OF NUMERICAL SIMULATIONS OF GRAVITY CASTING OF DUCTILE IRON CASTINGS. Online. In TANGER LTD. METAL 2021 Conference Proceedings. OSTRAVA, CZECH REPUBLIC: TANGER LTD, 2024, p. 166-171, 1459 pp. ISSN 2694-9296.
      URL
      RIV: Proceedings paper. English. Czech Republic.
      Gryc, Karel (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: Ductile iron; microstructure; numerical simulation; model validation; ProCAST
      Reviewed: yes
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 9/4/2025 14:27.
      More: https://is.vstecb.cz/publication/75201/en
    12. Physical modeling of two-phase liquid-gas processes occurring in the refining ladle for Fe-Si alloy refining process
      MERDER, Tomasz, Sławomir KOZŁOWSKI, Jacek PIEPRZYCA, Mariola SATERNUS, Agnieszka SOBIANOWSKA‑TUREK and Ladislav SOCHA. Physical modeling of two-phase liquid-gas processes occurring in the refining ladle for Fe-Si alloy refining process. SCIENTIFIC REPORTS. GERMANY, BERLIN: NATURE PORTFOLIO, 2024, vol. 14, No 1, p. 1-16. ISSN 2045-2322.
      URL
      Name in Czech: Fyzikální modelování dvoufázových procesů kapalina-plyn probíhajících v rafinační pánvi pro proces rafinace slitin Fe-Si
      Name (in English): Physical modeling of two-phase liquid-gas processes occurring in the refining ladle for Fe-Si alloy refining process
      RIV/75081431:_____/24:00002831 Article in a journal. English. Germany.
      Merder, Tomasz (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: Steel; Ferroalloys; Ferrosilicon; Refining gas; Water models; Physical modelling
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 2/4/2025 15:04.
      More: https://is.vstecb.cz/publication/75021/en
    13. Preparation of Rotor Geometry for Setting up Numerical Model of Flow in Refining Ladle
      MANOCH, Lukáš, Ladislav SOCHA, Jana SVIŽELOVÁ, Karel GRYC and Adnan MOHAMED. Preparation of Rotor Geometry for Setting up Numerical Model of Flow in Refining Ladle. Engineering Proceedings. Switzerland: MDPI, 2024, vol. 64, No 13, p. 1-6. ISSN 2673-4591.
      URL
      Name in Czech: Příprava geometrie rotoru pro sestavení numerického modelu proudění v rafinační pánvi
      Name (in English): Preparation of Rotor Geometry for Setting up Numerical Model of Flow in Refining Ladle
      RIV/75081431:_____/24:00002821 Article in a journal. English. Switzerland.
      Manoch, Lukáš (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Mohamed, Adnan (203 Czech Republic, belonging to the institution)
      Keywords in English: 3D CAD; aluminum refining; Computational Fluid Dynamics (CFD); FDU unit
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 2/4/2025 15:21.
      More: https://is.vstecb.cz/publication/75061/en
    14. Quality Assessment of Aluminium Castings Using Computed Tomography
      PINTA, Martin, Ladislav SOCHA, Karel GRYC, Jana SVIŽELOVÁ and Kamil KOZA. Quality Assessment of Aluminium Castings Using Computed Tomography. Engineering Proceedings. Basel (Switzerland): Multidisciplinary Digital Publishing Institute (MDPI), 2024, vol. 64, No 1, p. 1-6. ISSN 2673-4591.
      URL
      Name in Czech: Hodnocení kvality hliníkových odlitků pomocí počítačové tomografie
      Name (in English): Quality Assessment of Aluminium Castings Using Computed Tomography
      RIV/75081431:_____/24:00002822 Article in a journal. English. Switzerland.
      Pinta, Martin (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Koza, Kamil (203 Czech Republic, belonging to the institution)
      Keywords in English: computed tomography; microstructural analysis; non-destructive testing; secondary aluminium alloys; porosity
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 2/4/2025 15:28.
      More: https://is.vstecb.cz/publication/75062/en
    15. Technologické podmínky implementace tvarové části formy z materiálu DIEVAR do výroby společnosti MOTOR JIKOV (Technological parameters for the implementation of the mould part made of DIEVAR material into the production of MOTOR JIKOV Group)
      DVOŘÁK, Martin, Miloslav ROH, Ackermann MICHAL, Jiří ŠAFKA, Filip VÉLE, Ludmila KUČEROVÁ, Ladislav SOCHA and Karel GRYC. Technologické podmínky implementace tvarové části formy z materiálu DIEVAR do výroby společnosti MOTOR JIKOV (Technological parameters for the implementation of the mould part made of DIEVAR material into the production of MOTOR JIKOV Group). 2024.
      Name in Czech: Technologické podmínky implementace tvarové části formy z materiálu DIEVAR do výroby společnosti MOTOR JIKOV
      Name (in English): Technological parameters for the implementation of the mould part made of DIEVAR material into the production of MOTOR JIKOV Group
      RIV/75081431:_____/24:00002699 Pilot plant, certified technology, variety, breed. Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Dvořák, Martin (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; aluminium alloys; additive manufacturing; heat treatment
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/3/2025 08:39.
      More: https://is.vstecb.cz/publication/74601/en
    16. Technologické podmínky implementace tvarové části formy z materiálu H11 do výroby GD Druckguss s.r.o. (Technological conditions for implementing the shaped part of the mold made of H11 material into the production of GD Druckguss s.r.o.)
      KUČEROVÁ, Ludmila, Karel GRYC, Ladislav SOCHA, Roman KUBEŠ, Václav SOCHACKÝ, Jiří ŠAFKA, Michal ACKERMANN and Filip VÉLE. Technologické podmínky implementace tvarové části formy z materiálu H11 do výroby GD Druckguss s.r.o. (Technological conditions for implementing the shaped part of the mold made of H11 material into the production of GD Druckguss s.r.o.). 2024.
      Name (in English): Technological conditions for implementing the shaped part of the mold made of H11 material into the production of GD Druckguss s.r.o.
      RIV/75081431:_____/24:00002702 Pilot plant, certified technology, variety, breed. Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Kučerová, Ludmila (guarantor) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; zinc alloys; additive manufacturing; casting
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/3/2025 08:42.
      More: https://is.vstecb.cz/publication/74661/en
    17. Technologické podmínky implementace tvarové části formy z materiálu H13 do výroby společnosti MOTOR JIKOV (Technological parameters for the implementation of the mould part made of H13 material into the production of MOTOR JIKOV Group)
      DVOŘÁK, Martin, Miloslav ROH, Michal ACKERMANN, Jiří ŠAFKA, Filip VÉLE, Ludmila KUČEROVÁ, Ladislav SOCHA and Karel GRYC. Technologické podmínky implementace tvarové části formy z materiálu H13 do výroby společnosti MOTOR JIKOV (Technological parameters for the implementation of the mould part made of H13 material into the production of MOTOR JIKOV Group). 2024.
      Name (in English): Technological parameters for the implementation of the mould part made of H13 material into the production of MOTOR JIKOV Group
      RIV/75081431:_____/24:00002697 Pilot plant, certified technology, variety, breed. Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Dvořák, Martin (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; aluminium alloys; additive manufacturing; heat treatment
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/3/2025 08:33.
      More: https://is.vstecb.cz/publication/74561/en
    18. Technologie výroby tvarové části formy z materiálu DIEVAR (aditivní tisk, tepelné zpracování a povrchová úprava) (Technology of production of the mould part from DIEVAR tool steel (additive printing, heat treatment and surface treatment))
      DVOŘÁK, Martin, Miloslav ROH, Michal ACKERMANN, Jiří ŠAFKA, Filip VÉLE, Ludmila KUČEROVÁ, Ladislav SOCHA and Karel GRYC. Technologie výroby tvarové části formy z materiálu DIEVAR (aditivní tisk, tepelné zpracování a povrchová úprava) (Technology of production of the mould part from DIEVAR tool steel (additive printing, heat treatment and surface treatment)). 2024.
      URL
      Name (in English): Technology of production of the mould part from DIEVAR tool steel (additive printing, heat treatment and surface treatment)
      RIV/75081431:_____/24:00002698 Pilot plant, certified technology, variety, breed. Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Dvořák, Martin (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; aluminium alloys; additive manufacturing; heat treatment
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/3/2025 08:36.
      More: https://is.vstecb.cz/publication/74581/en
    19. Technologie výroby tvarové části formy z materiálu H11 (aditivní tisk, tepelné zpracování a povrchová úprava) (Certified technology of the mould part from H11 tool steel (additive manufacturing, heat treatment and surface finishing))
      KUČEROVÁ, Ludmila, Ackermann MICHAL, Jiří ŠAFKA, Filip VÉLE, Roman KUBEŠ, Václav SOCHACKÝ, Karel GRYC and Ladislav SOCHA. Technologie výroby tvarové části formy z materiálu H11 (aditivní tisk, tepelné zpracování a povrchová úprava) (Certified technology of the mould part from H11 tool steel (additive manufacturing, heat treatment and surface finishing)). 2024.
      Name (in English): Certified technology of the mould part from H11 tool steel (additive manufacturing, heat treatment and surface finishing)
      RIV/75081431:_____/24:00002700 Pilot plant, certified technology, variety, breed. Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Kučerová, Ludmila (guarantor) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; zinc alloys; additive manufacturing; heat treatment
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/3/2025 08:46.
      More: https://is.vstecb.cz/publication/74621/en
    20. Technologie výroby tvarové části formy z materiálu H13 (aditivní tisk, tepelné zpracování a povrchová úprava) (Technology of production of the mould part from H13 tool steel (additive printing, heat treatment and surface treatment))
      DVOŘÁK, Martin, Miloslav ROH, Michal ACKERMANN, Jiří ŠAFKA, Filip VÉLE, Ludmila KUČEROVÁ, Ladislav SOCHA and Karel GRYC. Technologie výroby tvarové části formy z materiálu H13 (aditivní tisk, tepelné zpracování a povrchová úprava) (Technology of production of the mould part from H13 tool steel (additive printing, heat treatment and surface treatment)). 2024.
      URL
      Name (in English): Technology of production of the mould part from H13 tool steel (additive printing, heat treatment and surface treatment)
      RIV/75081431:_____/24:00002696 Pilot plant, certified technology, variety, breed. Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Dvořák, Martin (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; aluminium alloys; additive manufacturing; heat treatment
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/3/2025 08:27.
      More: https://is.vstecb.cz/publication/74541/en
    21. Technologie výroby tvarové části formy z materiálu M789 (aditivní tisk, tepelné zpracování a povrchová úprava) (Certified technology of the mould part from M789 steel (additive manufacturing, heat treatment and surface finishing))
      KUČEROVÁ, Ludmila, Michal ACKERMANN, Jiří ŠAFKA, Filip VÉLE, Roman KUBEŠ, Václav SOCHACKÝ, Karel GRYC and Ladislav SOCHA. Technologie výroby tvarové části formy z materiálu M789 (aditivní tisk, tepelné zpracování a povrchová úprava) (Certified technology of the mould part from M789 steel (additive manufacturing, heat treatment and surface finishing)). 2024.
      Name (in English): Certified technology of the mould part from M789 steel (additive manufacturing, heat treatment and surface finishing)
      RIV/75081431:_____/24:00002701 Pilot plant, certified technology, variety, breed. Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Kučerová, Ludmila (guarantor) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; zinc alloys; additive manufacturing; heat treatment
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/3/2025 08:49.
      More: https://is.vstecb.cz/publication/74641/en
    22. THE POSSIBILITIES OF STUDYING THE LIFETIME OF ADDITIVELY MANUFACTURED SHAPED MOLD PARTS
      PINTA, Martin, Ladislav SOCHA, Karel GRYC, Jana SVIŽELOVÁ, Adnan MOHAMED, Martin DVOŘÁK and Miloslav ROH. THE POSSIBILITIES OF STUDYING THE LIFETIME OF ADDITIVELY MANUFACTURED SHAPED MOLD PARTS. Online. In TANGER LTD. METAL-Conference Proceedings. OSTRAVA, CZECH REPUBLIC: TANGER LTD, 2024, p. 138-145, 650 pp. ISSN 2694-9296.
      RIV: Proceedings paper. English. Czech Republic.
      Pinta, Martin (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Mohamed, Adnan (203 Czech Republic, belonging to the institution)
      Keywords in English: 3D scanning; 3D CNC CMM; additive printing; dimensional and shape analysis; material and metallographic analysis
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 10/4/2025 10:47.
      More: https://is.vstecb.cz/publication/75301/en
    23. THE PROCESSING OF EXPERIMENTAL DATA FROM THE PHYSICAL MODEL OF A FDU REFINING UNIT
      KOLÍNSKÝ, Jan, Tomáš PRÁŠIL, Ladislav SOCHA, Karel GRYC, Jana SVIŽELOVÁ, Martin DVOŘÁK and Petr NUSKA. THE PROCESSING OF EXPERIMENTAL DATA FROM THE PHYSICAL MODEL OF A FDU REFINING UNIT. Online. In TANGER LTD. METAL 2023 Conference Proceedings. OSTRAVA, CZECH REPUBLIC: TANGER LTD, 2024, p. 101-107, 717 pp. ISSN 2694-9296.
      URL
      RIV: Proceedings paper. English. Czech Republic.
      Kolínský, Jan (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: Physical modelling; aluminium; degassing; experimental data; parameterization
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 9/4/2025 14:38.
      More: https://is.vstecb.cz/publication/75221/en
    24. Úprava chlazení komponenty formy pro tlakové lití hliníku s využitím numerických simulací (Design of Aluminium HPDC Mold Component Cooling Using Numerical Simulations)
      SVIŽELOVÁ, Jana, Ladislav SOCHA, Miloslav ROH and Martin DVOŘÁK. Úprava chlazení komponenty formy pro tlakové lití hliníku s využitím numerických simulací (Design of Aluminium HPDC Mold Component Cooling Using Numerical Simulations). Hutnické listy. 2024, LXXVII, 1-3, p. 17-26. ISSN 0018-8069.
      URL
      Name (in English): Design of Aluminium HPDC Mold Component Cooling Using Numerical Simulations
      RIV: Article in a journal. Czech. Czech Republic.
      Sviželová, Jana (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: HPDC; conformal cooling; temperature field; numerical simulation; mold design
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 14/4/2025 09:24.
      More: https://is.vstecb.cz/publication/75341/en
    25. Výpočetní tomografie jako nástroj pro sledování porozity v tlakově litých zinkových odlitcích (Computed Tomography as a Tool for Investigating Porosity in Zinc High- Pressure Die Casting)
      KOZA, Kamil, Karel GRYC, Ladislav SOCHA, Roman KUBEŠ, Václav SOCHACKÝ, Jaromír TROBL, Jana SVIŽELOVÁ and Martin PINTA. Výpočetní tomografie jako nástroj pro sledování porozity v tlakově litých zinkových odlitcích (Computed Tomography as a Tool for Investigating Porosity in Zinc High- Pressure Die Casting). Hutnické listy. 2024, LXXVII, 4-6, p. 5-10. ISSN 0018-8069.
      URL
      Name (in English): Computed Tomography as a Tool for Investigating Porosity in Zinc High- Pressure Die Casting
      RIV: Article in a journal. Czech. Czech Republic.
      Koza, Kamil (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Pinta, Martin (203 Czech Republic, belonging to the institution)
      Keywords in English: die casting; zinc alloy; computed tomography; porosity; mould wear
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 28/4/2025 14:49.
      More: https://is.vstecb.cz/publication/75421/en

    2023

    1. Komplexní analýzy materiálových vlastností nelegovaných konstrukčních ocelí (Complex analyses of material properties of non-alloy construction steels)
      PINTA, Martin, Kamil KOZA, Jana SVIŽELOVÁ, Ladislav SOCHA, Karel GRYC and Tomáš SELLNER. Komplexní analýzy materiálových vlastností nelegovaných konstrukčních ocelí (Complex analyses of material properties of non-alloy construction steels). Hutnické listy. 2023, LXXVI, 1-3, p. 15-23. ISSN 0018-8069.
      URL
      Name (in English): Complex analyses of material properties of non-alloy construction steels
      RIV: Article in a journal. Czech. Czech Republic.
      Pinta, Martin (203 Czech Republic, guarantor, belonging to the institution) -- Koza, Kamil (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sellner, Tomáš (203 Czech Republic, belonging to the institution)
      Keywords in English: steel; S235; chemical composition; OES; mechanical properties
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 14/4/2025 12:51.
      More: https://is.vstecb.cz/publication/75441/en
    2. Modern Trends in Foundry
      SATERNUS, Mariola and Ladislav SOCHA. Modern Trends in Foundry. METALS. BASEL, SWITZERLAND: MDPI, 2023, vol. 13, No 7, p. 1-3. ISSN 2075-4701.
      URL
      Name in Czech: Moderní trendy ve slévárenství
      Name (in English): Modern Trends in Foundry
      RIV/75081431:_____/23:00002830 Article in a journal. English. Switzerland.
      Saternus, Mariola (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: Cast iron; Nonferrous metals and alloys; Metallurgy; Refining; Forming mixtures; Casting processes; Physical modeling; Numerical modeling; Recycling; Environmental impact
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 2/4/2025 14:54.
      More: https://is.vstecb.cz/publication/75001/en
    3. Research on the impact of rotor wear on the efectiveness of the aluminium refning process
      SOCHA, Ladislav, Tomáš PRÁŠIL, Karel GRYC, Jana SVIŽELOVÁ, Mariola SATERNUS, Tomasz MERDER, Jacek PIEPRZYCA and Petr NUSKA. Research on the impact of rotor wear on the efectiveness of the aluminium refning process. SCIENTIFIC REPORTS. 2023, vol. 13, No 1, p. 1-17. ISSN 2045-2322.
      URL
      Name in Czech: Výzkum vlivu rotoru opotřebení na účinnost procesu zušlechťování hliníku
      Name (in English): Research on the impact of rotor wear on the efectiveness of the aluminium refning process
      RIV/75081431:_____/23:00002685 Article in a journal. English. United Kingdom of Great Britain and Northern Ireland.
      Socha, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: FLUID-FLOW; GAS INJECTION; DEGASSING PROCESS; IMPELLER DESIGN; BUBBLE; SIMULATION; MODEL; DISPERSION; BLOCKAGE
      Changed by: Barbora Kroupová, učo 25655. Changed: 3/6/2024 14:19.
      More: https://is.vstecb.cz/publication/72061/en

    2022

    1. Aluminum Melt Degassing Process Evaluation Depending on the Design and the Degree of the FDU Unit Graphite Rotor Wear
      PODAŘIL, Martin, Ján MAJERNÍK, Rudolf KAMPF, Ladislav SOCHA, Karel GRYC, Tomáš PRÁŠIL and Martin GRÁF. Aluminum Melt Degassing Process Evaluation Depending on the Design and the Degree of the FDU Unit Graphite Rotor Wear. Materials. Switzerland: MDPI, 2022, Volume 15, Issue 14, p. nestránkováno, 15 pp. ISSN 1996-1944.
      URL
      RIV/75081431:_____/22:00002297 Article in a journal. English. Switzerland.
      Podařil, Martin (703 Slovakia, guarantor, belonging to the institution) -- Majerník, Ján (703 Slovakia, belonging to the institution) -- Kampf, Rudolf (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: aluminum alloys; refining; melt degassing; FDU unit; graphite rotor
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 21/3/2023 18:31.
      More: https://is.vstecb.cz/publication/64141/en
    2. COMBINATION OF SURFACE AND VOLUME ANALYSIS METHODS IN THE STUDY OF THE QUALITY OF THIN-WALLED CASTINGS FROM ZP0410 ALLOY
      GRYC, Karel, Ladislav SOCHA, Roman KUBEŠ, Václav SOCHACKÝ, Kamil KOZA, Jaromír TROBL and Martin PINTA. COMBINATION OF SURFACE AND VOLUME ANALYSIS METHODS IN THE STUDY OF THE QUALITY OF THIN-WALLED CASTINGS FROM ZP0410 ALLOY. Online. In Tanger Ltd. METAL 2022 Conference Proceedings. Ostrava, Czech Republic, EU: Tanger Ltd., 2022, p. 708-713, 884 pp. ISSN 2694-9296.
      URL
      RIV: Proceedings paper. English. Czech Republic.
      Gryc, Karel (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Koza, Kamil (203 Czech Republic, belonging to the institution) -- Pinta, Martin (203 Czech Republic, belonging to the institution)
      Keywords in English: Zinc alloys; melting; casting; recycling; returnable material
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 10/4/2025 10:31.
      More: https://is.vstecb.cz/publication/75281/en
    3. Impact of Rotor Material Wear on the Aluminum Refining Process
      PRÁŠIL, Tomáš, Ladislav SOCHA, Karel GRYC, Jana SVIŽELOVÁ, Mariola SATERNUS, Tomasz MERDER, Jacek PIEPRZYCA and Martin GRÁF. Impact of Rotor Material Wear on the Aluminum Refining Process. Materials. Basel, Switzerland: MDPI, 2022, vol. 15, No 13, p. 1-12. ISSN 1996-1944.
      URL
      RIV/75081431:_____/22:00002311 Article in a journal. English. Switzerland.
      Prášil, Tomáš (203 Czech Republic, guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Saternus, Mariola (616 Poland) -- Merder, Tomasz (616 Poland) -- Pieprzyca, Jacek (616 Poland) -- Gráf, Martin (203 Czech Republic)
      Keywords in English: aluminum refining; graphite wear; wear testing; rotary impeller
      Changed by: Barbora Kroupová, učo 25655. Changed: 21/3/2023 13:31.
      More: https://is.vstecb.cz/publication/67221/en
    4. Impactof Rotor Design on Its Wear and Work Efficiency ofthe Aluminum Refining Process
      PRÁŠIL, Tomáš, Ladislav SOCHA, Karel GRYC, Jana SVIŽELOVÁ, Mariola SATERNUS, Tomasz MERDER, Jacek PIEPRZYCA and Martin GRÁF. Impactof Rotor Design on Its Wear and Work Efficiency ofthe Aluminum Refining Process. Metals. SWITZERLAND: MDPI, 2022, vol. 12, No 11, p. 2-14. ISSN 2075-4701.
      URL
      RIV/75081431:_____/22:00002312 Article in a journal. English. Switzerland.
      Prášil, Tomáš (203 Czech Republic, guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Saternus, Mariola (616 Poland) -- Merder, Tomasz (616 Poland) -- Pieprzyca, Jacek (616 Poland) -- Gráf, Martin (203 Czech Republic)
      Keywords in English: aluminum refining; graphite rotor; wear testing; 3D scanning; Dross Test
      Changed by: Barbora Kroupová, učo 25655. Changed: 21/3/2023 13:31.
      More: https://is.vstecb.cz/publication/67241/en
    5. IMPLEMENTATION OF CORED WIRE TECHNOLOGY INTO PRODUCTION OF DUCTILE IRON FOR CASTINGS DESIGNATED FOR EXTREME CONDITIONS
      SOCHA, Ladislav, Karel GRYC, Kamil KOZA, Jana SVIŽELOVÁ, Miroslav CHMIEL and Petra FRONKOVÁ. IMPLEMENTATION OF CORED WIRE TECHNOLOGY INTO PRODUCTION OF DUCTILE IRON FOR CASTINGS DESIGNATED FOR EXTREME CONDITIONS. Online. In Tanger Ltd. METAL 2022 Conference Proceedings. OSTRAVA, CZECH REPUBLIC: Tanger Ltd., 2022, p. 134-141, 884 pp. ISSN 2694-9296.
      URL
      RIV: Proceedings paper. English. Czech Republic.
      Socha, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Koza, Kamil (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: Metallurgy; ductile iron; cored wire; inoculation; modification
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 10/4/2025 09:37.
      More: https://is.vstecb.cz/publication/75241/en
    6. Komplexní rafinační technologie pro náročné hliníkové odlitky typu ROCKER COVER: šachtová plynová pec – odplyňovací zařízení – tlakové lití (Complex refining technology for demanding aluminum castings of the ROCKER COVER type: shaft gas furnace - degassing equipment - pressure casting)
      PRÁŠIL, Tomáš, Martin GRÁF, Ladislav SOCHA and Karel GRYC. Komplexní rafinační technologie pro náročné hliníkové odlitky typu ROCKER COVER: šachtová plynová pec – odplyňovací zařízení – tlakové lití (Complex refining technology for demanding aluminum castings of the ROCKER COVER type: shaft gas furnace - degassing equipment - pressure casting). 2022.
      Name (in English): Complex refining technology for demanding aluminum castings of the ROCKER COVER type: shaft gas furnace - degassing equipment - pressure casting
      RIV/75081431:_____/22:00002313 Pilot plant, certified technology, variety, breed. Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: refining of aluminium alloys; hydrogen in aluminium alloys; microcleanness; microstructure; semi-operational tests; laboratory tests; physical
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 14:53.
      More: https://is.vstecb.cz/publication/67263/en
    7. Komplexní rafinační technologie pro náročné hliníkové odlitky typu STROKE CYLINDER a GEARBOX BEAM: indukční pec – odplyňovací zařízení – nízkotlaké lití (Complex refining technology for demanding STROKE CYLINDER and GEARBOX BEAM aluminum castings: induction furnace - degassing equipment - low pressure casting)
      PRÁŠIL, Tomáš, Martin GRÁF, Ladislav SOCHA and Karel GRYC. Komplexní rafinační technologie pro náročné hliníkové odlitky typu STROKE CYLINDER a GEARBOX BEAM: indukční pec – odplyňovací zařízení – nízkotlaké lití (Complex refining technology for demanding STROKE CYLINDER and GEARBOX BEAM aluminum castings: induction furnace - degassing equipment - low pressure casting). 2022.
      Name (in English): Complex refining technology for demanding STROKE CYLINDER and GEARBOX BEAM aluminum castings: induction furnace - degassing equipment - low pressure casting
      RIV/75081431:_____/22:00002314 Pilot plant, certified technology, variety, breed. Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Prášil, Tomáš (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: refining of aluminium alloys; hydrogen in aluminium alloys; microcleanness; microstructure; semi-operational tests; laboratory tests; physical
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 14:52.
      More: https://is.vstecb.cz/publication/67281/en
    8. Komplexní technologie výroby: tavení → mimopecní zpracování → odlévání odlitku z vysoce jakostní tvárné litiny → kompresory → lodní průmysl (Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → compressors → ship industry)
      CHMIEL, Miroslav, Petra FRONKOVÁ, Josef HORÁČEK, Ladislav SOCHA and Karel GRYC. Komplexní technologie výroby: tavení → mimopecní zpracování → odlévání odlitku z vysoce jakostní tvárné litiny → kompresory → lodní průmysl (Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → compressors → ship industry). 2022.
      Name (in English): Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → compressors → ship industry
      RIV/75081431:_____/22:00002519 Pilot plant, certified technology, variety, breed. Czech. Czech Republic.
      Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: foundry industry; production of ductile cast iron; out of furnace treatment; inoculation; modifications; casting; heat treatment; metallographic analysis; thermal analysis; mechanical properties; operational experiments; numerical simulations
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 23/3/2023 14:06.
      More: https://is.vstecb.cz/publication/67403/en
    9. Komplexní technologie výroby: tavení → mimopecní zpracování → odlévání odlitku z vysoce jakostní tvárné litiny → převodovky → energetický průmysl (Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → gearboxes → energy industry)
      CHMIEL, Miroslav, Petra FRONKOVÁ, Josef HORÁČEK, Ladislav SOCHA and Karel GRYC. Komplexní technologie výroby: tavení → mimopecní zpracování → odlévání odlitku z vysoce jakostní tvárné litiny → převodovky → energetický průmysl (Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → gearboxes → energy industry). 2022.
      Name (in English): Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → gearboxes → energy industry
      RIV: Pilot plant, certified technology, variety, breed. Czech. Czech Republic.
      Chmiel, Miroslav (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: foundry industry; production of ductile cast iron; out of furnace treatment; inoculation; modifications; casting; heat treatment; metallographic analysis; thermal analysis; mechanical properties; operational experiments; numerical simulations
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 23/3/2023 14:47.
      More: https://is.vstecb.cz/publication/67421/en
    10. Komplexní technologie výroby: tavení → mimopecní zpracování → odlévání odlitku z vysoce jakostní tvárné litiny → převodovky → železniční doprava (Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → gearboxes → railway transport)
      CHMIEL, Miroslav, Petra FRONKOVÁ, Josef HORÁČEK, Ladislav SOCHA and Karel GRYC. Komplexní technologie výroby: tavení → mimopecní zpracování → odlévání odlitku z vysoce jakostní tvárné litiny → převodovky → železniční doprava (Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → gearboxes → railway transport). 2022.
      Name (in English): Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → gearboxes → railway transport
      RIV/75081431:_____/22:00002520 Pilot plant, certified technology, variety, breed. Czech. Czech Republic.
      Chmiel, Miroslav (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: foundry industry; production of ductile cast iron; out of furnace treatment; inoculation; modifications; casting; heat treatment; metallographic analysis; thermal analysis; mechanical properties; operational experiments; numerical simulations
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 23/3/2023 14:51.
      More: https://is.vstecb.cz/publication/67441/en
    11. Komplexní technologie výroby: tavení → mimopecní zpracování → odlévání odlitku z vysoce jakostní tvárné litiny → manévrovací prvky → lodní průmysl (Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → maneuvering elements → ship industry)
      CHMIEL, Miroslav, Petra FRONKOVÁ, Josef HORÁČEK, Ladislav SOCHA and Karel GRYC. Komplexní technologie výroby: tavení → mimopecní zpracování → odlévání odlitku z vysoce jakostní tvárné litiny → manévrovací prvky → lodní průmysl (Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → maneuvering elements → ship industry). 2022.
      Name (in English): Complex production technology: melting →secondary metallurgy → high-quality ductile iron casting → maneuvering elements → ship industry
      RIV/75081431:_____/22:00002518 Pilot plant, certified technology, variety, breed. Czech. Czech Republic.
      Chmiel, Miroslav (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: foundry industry; production of ductile cast iron; out of furnace treatment; inoculation; modifications; casting; heat treatment; metallographic analysis; thermal analysis; mechanical properties; operational experiments; numerical simulations
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 23/3/2023 14:57.
      More: https://is.vstecb.cz/publication/67384/en
    12. PHYSICAL MODELLING OF ALUMINUM MELT DEGASSING IN LOW-PRESSURE DIE CASTING CONDITIONS
      GRYC, Karel, Jana SVIŽELOVÁ, Tomáš PRÁŠIL, Petr NOVÁČEK and Ladislav SOCHA. PHYSICAL MODELLING OF ALUMINUM MELT DEGASSING IN LOW-PRESSURE DIE CASTING CONDITIONS. Online. In 31st International Conference on Metallurgy and Materials, METAL 2022. 31st ed. Neuveden: Neuveden, 2022, p. 785-791. ISBN 978-80-88365-06-8.
      URL
      Name in Czech: FYZIKÁLNÍ MODELOVÁNÍ ODPLYŇOVÁNÍ HLINÍKOVÉ TAVENINY V PODMÍNKÁCH NÍZKOTLAKÉHO TLAKOVÉHO LITÍ
      Name (in English): PHYSICAL MODELLING OF ALUMINUM MELT DEGASSING IN LOW-PRESSURE DIE CASTING CONDITIONS
      RIV/75081431:_____/22:00002686 Proceedings paper. English. Czech Republic.
      Gryc, Karel (203 Czech Republic, guarantor, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: aluminum; FDU; low pressure die casting; Physical modelling; refinement process
      Type of proceedings: post-proceedings
      Changed by: Barbora Kroupová, učo 25655. Changed: 3/6/2024 14:19.
      More: https://is.vstecb.cz/publication/72081/en
    13. Pokročilá technologie výroby litinových odlitků typu KARDAN (Advanced technology for the production of KARDAN cast iron castings)
      PRÁŠIL, Tomáš, Ivan HOTOVÝ, Pavel ČÍŽEK, Jan ŠTEFÁNEK, Karel GRYC and Ladislav SOCHA. Pokročilá technologie výroby litinových odlitků typu KARDAN (Advanced technology for the production of KARDAN cast iron castings). 2022.
      Name (in English): Advanced technology for the production of KARDAN cast iron castings
      RIV/75081431:_____/22:00002523 Pilot plant, certified technology, variety, breed. Czech. Czech Republic.
      Prášil, Tomáš (guarantor) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: ductile iron; metallurgy of cast iron; numerical simulations; shape and size analysis; 3D scanning; metallography; material analysis; quality
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 24/3/2023 09:48.
      More: https://is.vstecb.cz/publication/67481/en
    14. Pokročilá technologie výroby litinových odlitků typu SPINDEL (Advanced technology for the production of SPINDEL cast iron castings)
      PRÁŠIL, Tomáš, Ivan HOTOVÝ, Jan ŠTEFÁNEK, Karel GRYC, Ladislav SOCHA and Pavel ČÍŽEK. Pokročilá technologie výroby litinových odlitků typu SPINDEL (Advanced technology for the production of SPINDEL cast iron castings). 2022.
      Name (in English): Advanced technology for the production of SPINDEL cast iron castings
      RIV/75081431:_____/22:00002524 Pilot plant, certified technology, variety, breed. Czech. Czech Republic.
      Prášil, Tomáš (guarantor) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: ductile iron; metallurgy of cast iron; numerical simulations; shape and size analysis; 3D scanning; metallography; material analysis; quality
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 24/3/2023 10:07.
      More: https://is.vstecb.cz/publication/67501/en
    15. Porovnání polévací metody a metody plněného profilu při výrobě litiny s kuličkovým grafitem v provozních podmínkách (Comparison of the Pouring Method and Cored Wire Method in Production of Ductile Cast Iron under Operating Conditions)
      SOCHA, Ladislav, Karel GRYC, Kamil KOZA, Josef ODEHNAL, Jana SVIŽELOVÁ, Miroslav CHMIEL and Petra FRONKOVÁ. Porovnání polévací metody a metody plněného profilu při výrobě litiny s kuličkovým grafitem v provozních podmínkách (Comparison of the Pouring Method and Cored Wire Method in Production of Ductile Cast Iron under Operating Conditions). Hutnické listy. 2022, LXXV, 5-6, p. 41-47. ISSN 0018-8069.
      URL
      Name (in English): Comparison of the Pouring Method and Cored Wire Method in Production of Ductile Cast Iron under Operating Conditions
      RIV: Article in a journal. Czech. Czech Republic.
      Socha, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Koza, Kamil (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: ductile cast iron; modification; inoculation; cored wire; operational experiment
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 14/4/2025 10:09.
      More: https://is.vstecb.cz/publication/75401/en
    16. Tvarová část formy z materiálu DIEVAR (aditivní tisk, tepelné zpracování a povrchová úprava) (Mould part made of DIEVAR material (additive manufacturing, heat treatment and surface treatment))
      PRÁŠIL, Tomáš, Miloslav ROH, Ladislav SOCHA, Karel GRYC, Martin DVOŘÁK, Michal ACKERMANN, Jiří ŠAFKA, Filip VÉLE and Ludmia KUČEROVÁ. Tvarová část formy z materiálu DIEVAR (aditivní tisk, tepelné zpracování a povrchová úprava) (Mould part made of DIEVAR material (additive manufacturing, heat treatment and surface treatment)). 2022.
      Name (in English): Mould part made of DIEVAR material (additive manufacturing, heat treatment and surface treatment)
      RIV/75081431:_____/22:00002315 Outcomes put into operation (prototype, working sample). Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Prášil, Tomáš (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: additive manufacturing; Dievar; hot working tool steel; die casting mould; mould insert; aluminium die casting; aluminium alloys
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 14:52.
      More: https://is.vstecb.cz/publication/67301/en
    17. Tvarová část formy z materiálu H11 (aditivní tisk, tepelné zpracování a povrchová úprava) (Mould part made of H11 material (additive printing, heat treatment and surface treatment))
      ŠAFKA, Jiří, Michal ACKERMAN, Ladislav SOCHA, Karel GRYC, Filip VÉLE, Ludmila KUČEROVÁ, Roman KUBEŠ and Václav SOCHACKÝ. Tvarová část formy z materiálu H11 (aditivní tisk, tepelné zpracování a povrchová úprava) (Mould part made of H11 material (additive printing, heat treatment and surface treatment)). 2022.
      Name (in English): Mould part made of H11 material (additive printing, heat treatment and surface treatment)
      RIV/75081431:_____/22:00002322 Outcomes put into operation (prototype, working sample). Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Šafka, Jiří (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; zinc alloys; additive manufacturing; casting
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 24/3/2023 12:55.
      More: https://is.vstecb.cz/publication/67565/en
    18. Tvarová část formy z materiálu H13 (aditivní tisk, tepelné zpracování a povrchová úprava) (Mould part made of H13 material (additive manufacturing, heat treatment and surface treatment))
      PRÁŠIL, Tomáš, Miloslav ROH, Ladislav SOCHA, Karel GRYC, Martin DVOŘÁK, Michal ACKERMANN, Jiří ŠAFKA, Filip VÉLE and Ludmia KUČEROVÁ. Tvarová část formy z materiálu H13 (aditivní tisk, tepelné zpracování a povrchová úprava) (Mould part made of H13 material (additive manufacturing, heat treatment and surface treatment)). 2022.
      Name (in English): Mould part made of H13 material (additive manufacturing, heat treatment and surface treatment)
      RIV/75081431:_____/22:00002316 Outcomes put into operation (prototype, working sample). Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Prášil, Tomáš (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: additive manufacturing; H13 steel; hot working tool steel; die casting mould; mould insert; aluminium die casting; aluminium alloys
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 14:51.
      More: https://is.vstecb.cz/publication/67321/en
    19. Tvarová část formy z materiálu M789 (aditivní tisk, tepelné zpracování a povrchová úprava) (Mould part made of M789 material (additive printing, heat treatment and surface treatment))
      ŠAFKA, Jiří, Michal ACKERMAN, Ladislav SOCHA, Karel GRYC, Filip VÉLE, Ludmila KUČEROVÁ, Roman KUBEŠ and Václav SOCHACKÝ. Tvarová část formy z materiálu M789 (aditivní tisk, tepelné zpracování a povrchová úprava) (Mould part made of M789 material (additive printing, heat treatment and surface treatment)). 2022.
      Name (in English): Mould part made of M789 material (additive printing, heat treatment and surface treatment)
      RIV/75081431:_____/22:00002323 Outcomes put into operation (prototype, working sample). Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Šafka, Jiří (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; zinc alloys; additive manufacturing; casting
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 24/3/2023 13:13.
      More: https://is.vstecb.cz/publication/67583/en
    20. Using Physical Modeling to Optimize the Aluminium Refining Process
      PRÁŠIL, Tomáš, Ladislav SOCHA, Karel GRYC, Jana SVIŽELOVÁ, Mariola SATERNUS, Tomasz MERDER, Jacek PIEPRZYCA and Martin GRÁF. Using Physical Modeling to Optimize the Aluminium Refining Process. Materials. BASEL, SWITZERLAND: MDPIST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2022, vol. 15, No 20, p. 2-12. ISSN 1996-1944.
      URL
      RIV/75081431:_____/22:00002310 Article in a journal. English. Switzerland.
      Prášil, Tomáš (203 Czech Republic, guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Saternus, Mariola (616 Poland) -- Merder, Tomasz (616 Poland) -- Pieprzyca, Jacek (616 Poland) -- Gráf, Martin (203 Czech Republic)
      Keywords in English: aluminium; refining; rotary impeller; physical modeling
      Changed by: Barbora Kroupová, učo 25655. Changed: 21/3/2023 13:31.
      More: https://is.vstecb.cz/publication/67202/en
    21. Zajištění stabilní produkce tenkostěnných odlitků ze slitiny ZP0410 při implementaci využití vratného materiálu (Ensuring Stable Production of Thin-walled Castings of Alloy ZP0410 during the Implementation of the Utilization of Returnable Material)
      GRYC, Karel, Ladislav SOCHA, Roman KUBEŠ, Václav SOCHACKÝ, Kamil KOZA and Jaromír TROBL. Zajištění stabilní produkce tenkostěnných odlitků ze slitiny ZP0410 při implementaci využití vratného materiálu (Ensuring Stable Production of Thin-walled Castings of Alloy ZP0410 during the Implementation of the Utilization of Returnable Material). Hutnické listy. 2022, LXXV, 5-6, p. 14-19. ISSN 0018-8069.
      URL
      Name (in English): Ensuring Stable Production of Thin-walled Castings of Alloy ZP0410 during the Implementation of the Utilization of Returnable Material
      RIV: Article in a journal. Czech. Czech Republic.
      Gryc, Karel (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Koza, Kamil (203 Czech Republic, belonging to the institution)
      Keywords in English: zinc alloys; melting; recycling; returnable material; castings; chemical composition; computed tomography
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 14/4/2025 09:46.
      More: https://is.vstecb.cz/publication/75361/en
    22. Zkušební vzorky z materiálu BÖHLER AMPO M789 (aditivní tisk, tepelné zpracování a povrchová úprava) (Test samples made of material BÖHLER AMPO M789 (additive manufacturing, heat treatment and surface treatment))
      ŠAFKA, Jiří, Michal ACKERMAN, Ladislav SOCHA, Karel GRYC, Filip VÉLE, Ludmila KUČEROVÁ, Roman KUBEŠ and Václav SOCHACKÝ. Zkušební vzorky z materiálu BÖHLER AMPO M789 (aditivní tisk, tepelné zpracování a povrchová úprava) (Test samples made of material BÖHLER AMPO M789 (additive manufacturing, heat treatment and surface treatment)). 2022.
      Name (in English): Test samples made of material BÖHLER AMPO M789 (additive manufacturing, heat treatment and surface treatment)
      RIV/75081431:_____/22:00002321 Outcomes put into operation (prototype, working sample). Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Šafka, Jiří (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: Hardenable steel; shape moulds; zinc alloys; additive manufacturing; casting
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 24/3/2023 13:21.
      More: https://is.vstecb.cz/publication/67542/en
    23. Zkušební vzorky z materiálu Dievar (aditivní tisk, tepelné zpracování a povrchová úprava) (Test samples made of material Dievar (additive manufacturing, heat treatment and surface treatment))
      ACKERMANN, Michal, Jiří ŠAFKA, Filip VÉLE, Ludmila KUČEROVÁ, Karolína BURDOVÁ, Tomáš PRÁŠIL, Miloslav ROH, Martin DVOŘÁK, Ladislav SOCHA and Karel GRYC. Zkušební vzorky z materiálu Dievar (aditivní tisk, tepelné zpracování a povrchová úprava) (Test samples made of material Dievar (additive manufacturing, heat treatment and surface treatment)). 2022.
      Name (in English): Test samples made of material Dievar (additive manufacturing, heat treatment and surface treatment)
      RIV/75081431:_____/22:00002318 Outcomes put into operation (prototype, working sample). Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Ackermann, Michal (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; aluminium alloys; additive manufacturing; casting
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 15:15.
      More: https://is.vstecb.cz/publication/67364/en
    24. Zkušební vzorky z materiálu H11 (aditivní tisk, tepelné zpracování a povrchová úprava) (Test samples made of material H11 (additive manufacturing, heat treatment and surface treatment))
      KUČEROVÁ, Ludmila, Michal ACKERMAN, Ladislav SOCHA, Karel GRYC, Filip VÉLE, Roman KUBEŠ, Václav SOCHACKÝ and Jiří ŠAFKA. Zkušební vzorky z materiálu H11 (aditivní tisk, tepelné zpracování a povrchová úprava) (Test samples made of material H11 (additive manufacturing, heat treatment and surface treatment)). 2022.
      Name (in English): Test samples made of material H11 (additive manufacturing, heat treatment and surface treatment)
      RIV/75081431:_____/22:00002320 Outcomes put into operation (prototype, working sample). Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Kučerová, Ludmila (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: Hardenable steel; shape moulds; zinc alloys; additive manufacturing; casting
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 24/3/2023 12:17.
      More: https://is.vstecb.cz/publication/67541/en
    25. Zkušební vzorky z materiálu H13 (aditivní tisk, tepelné zpracování a povrchová úprava) (Test samples made of material H13 (additive manufacturing, heat treatment and surface treatment))
      KUČEROVÁ, Ludmila, Karolína BURDOVÁ, Michal ACKERMANN, Jiří ŠAFKA, Filip VÉLE, Tomáš PRÁŠIL, Miloslav ROH, Martin DVOŘÁK, Ladislav SOCHA and Karel GRYC. Zkušební vzorky z materiálu H13 (aditivní tisk, tepelné zpracování a povrchová úprava) (Test samples made of material H13 (additive manufacturing, heat treatment and surface treatment)). 2022.
      Name (in English): Test samples made of material H13 (additive manufacturing, heat treatment and surface treatment)
      RIV/75081431:_____/22:00002317 Outcomes put into operation (prototype, working sample). Czech. Czech Republic. obsah podléhá obchodnímu tajemství.
      Kučerová, Ludmila (guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: hardenable steel; shape moulds; aluminium alloys; additive manufacturing; casting
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 22/3/2023 14:50.
      More: https://is.vstecb.cz/publication/67343/en

    2021

    1. ASSESSMENT OF ROTARY IMPELLER EFFICIENCY BY PHYSICAL MODELLING OF AN ALUMINUM REFINING PROCESS
      SOCHA, Ladislav, Karel GRYC, Jana SVIŽELOVÁ, Tomáš PRÁŠIL, Roman POSPÍŠIL and Martin GRÁF. ASSESSMENT OF ROTARY IMPELLER EFFICIENCY BY PHYSICAL MODELLING OF AN ALUMINUM REFINING PROCESS. Online. In 30th International Conference on Metallurgy and Materials, METAL 2021. 30th ed. Neuveden: Neuveden, 2021, p. 1160-1165. ISBN 978-80-87294-99-4.
      URL
      Name in Czech: POSOUZENÍ ÚČINNOSTI ROTAČNÍHO OBĚŽNÉHO KOLA POMOCÍ FYZIKÁLNÍHO MODELOVÁNÍ PROCESU RAFINACE HLINÍKU
      Name (in English): ASSESSMENT OF ROTARY IMPELLER EFFICIENCY BY PHYSICAL MODELLING OF AN ALUMINUM REFINING PROCESS
      RIV/75081431:_____/21:00002687 Proceedings paper. English. Czech Republic.
      Socha, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: Aluminum; physical modelling; refinement process; FDU; impeller design
      Type of proceedings: post-proceedings
      Changed by: Barbora Kroupová, učo 25655. Changed: 3/6/2024 14:20.
      More: https://is.vstecb.cz/publication/72101/en
    2. OPTIMIZATION OF OPERATING CONDITIONS OF ALUMINUM MELT REFINING PROCESS IN LABORATORY CONDITIONS
      SOCHA, Ladislav, Karel GRYC, Jana SVIŽELOVÁ, Tomáš PRÁŠIL, Roman POSPÍŠIL and Martin GRÁF. OPTIMIZATION OF OPERATING CONDITIONS OF ALUMINUM MELT REFINING PROCESS IN LABORATORY CONDITIONS. Online. In METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials. 30th ed. Brno, Česká republika: Neuveden, 2021, p. 1166-1172. ISBN 978-80-87294-99-4.
      URL
      Name in Czech: OPTIMALIZACE PROVOZNÍCH PODMÍNEK PROCESU RAFINACE TAVENINY HLINÍKU V LABORATORNÍCH PODMÍNKÁCH
      Name (in English): OPTIMIZATION OF OPERATING CONDITIONS OF ALUMINUM MELT REFINING PROCESS IN LABORATORY CONDITIONS
      RIV/75081431:_____/21:00002688 Proceedings paper. English. Czech Republic.
      Socha, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: Aluminum; FDU; Metallurgy; Physical modelling; Refinement process
      Type of proceedings: post-proceedings
      Changed by: Barbora Kroupová, učo 25655. Changed: 4/6/2024 10:18.
      More: https://is.vstecb.cz/publication/72121/en
    3. STUDY OF ALUMINUM MELT REFINING PROCESS EFFICIENCY DEPENDING ON IMPELLER WEAR
      SOCHA, Ladislav, Karel GRYC, Jana SVIŽELOVÁ, Tomáš PRÁŠIL, Roman POSPÍŠIL and Martin GRÁF. STUDY OF ALUMINUM MELT REFINING PROCESS EFFICIENCY DEPENDING ON IMPELLER WEAR. Online. In 30th Anniversary International Conference on Metallurgy and Materials. 30th ed. Neuveden: Neuveden, 2021, p. 1173-1178. ISBN 978-80-87294-99-4.
      URL
      Name in Czech: STUDIE ÚČINNOSTI PROCESU RAFINACE TAVENINY HLINÍKU V ZÁVISLOSTI NA OPOTŘEBENÍ OBĚŽNÉHO KOLA
      Name (in English): STUDY OF ALUMINUM MELT REFINING PROCESS EFFICIENCY DEPENDING ON IMPELLER WEAR
      RIV/75081431:_____/21:00002689 Proceedings paper. English. Czech Republic.
      Socha, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution)
      Keywords in English: Aluminum; Aluminum refinement; Dichte index; FDU; Impeller wear
      Type of proceedings: post-proceedings
      Changed by: Barbora Kroupová, učo 25655. Changed: 4/6/2024 10:16.
      More: https://is.vstecb.cz/publication/72141/en
    4. STUDY OF DUCTILE IRON PRODUCTION FOR CASTINGS DESIGNATED FOR EXTREME CONDITIONS
      SOCHA, Ladislav, Karel GRYC, Jana SVIŽELOVÁ, Miroslav CHMIEL, Petra FRONKOVÁ, Kamil KOZA and Helena KACHLÍŘOVÁ. STUDY OF DUCTILE IRON PRODUCTION FOR CASTINGS DESIGNATED FOR EXTREME CONDITIONS. Online. In Tanger Ltd. METAL 2021 Conference Proceedings. OSTRAVA, CZECH REPUBLIC: Tanger Ltd., 2021, p. 172-179, 1459 pp. ISSN 2694-9296.
      URL
      RIV: Proceedings paper. English. Czech Republic.
      Socha, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Sviželová, Jana (203 Czech Republic, belonging to the institution) -- Koza, Kamil (203 Czech Republic, belonging to the institution) -- Kachlířová, Helena (203 Czech Republic, belonging to the institution)
      Keywords in English: Ductile iron; inoculation; modification; performance experiment; metallography
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 10/4/2025 10:05.
      More: https://is.vstecb.cz/publication/75261/en
    5. Technologie recyklace zinkového odpadu při výrobě silnostěnných odlitků ZP0410 (Zinc waste recycling technology in the production of thick-walled castings ZP0410)
      KUBEŠ, Roman, Václav SOCHACKÝ, Jaromír TROBL, Karel GRYC and Ladislav SOCHA. Technologie recyklace zinkového odpadu při výrobě silnostěnných odlitků ZP0410 (Zinc waste recycling technology in the production of thick-walled castings ZP0410). 2021.
      Name (in English): Zinc waste recycling technology in the production of thick-walled castings ZP0410
      RIV/75081431:_____/21:00002018 Pilot plant, certified technology, variety, breed. Czech. Czech Republic.
      Kubeš, Roman (guarantor) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: recycling; scrap; zinc alloys
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 19/4/2022 10:06.
      More: https://is.vstecb.cz/publication/62881/en
    6. Technologie recyklace zinkového odpadu při výrobě tenkostěnných odlitků ZP0410 (Recycling technology of zinc waste in the production of thin-walled castings ZP0410)
      SOCHA, Ladislav, Karel GRYC, Roman KUBEŠ, Václav SOHACKÝ and Jaromír TROBL. Technologie recyklace zinkového odpadu při výrobě tenkostěnných odlitků ZP0410 (Recycling technology of zinc waste in the production of thin-walled castings ZP0410). 2021.
      Name (in English): Recycling technology of zinc waste in the production of thin-walled castings ZP0410
      RIV/75081431:_____/21:00002319 Pilot plant, certified technology, variety, breed. Czech. Czech Republic.
      Socha, Ladislav (203 Czech Republic, guarantor, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: recycling; scrap; zinc alloys
      Changed by: Mgr. Nikola Petříková, učo 28324. Changed: 24/3/2023 10:35.
      More: https://is.vstecb.cz/publication/67524/en
    7. Zajištění stabilní produkce silnostěnných odlitků ze slitiny ZP0410 při implementaci využití vratného materiálu (Ensuring Stable Production of Thick-walled Castings of Alloy ZP0410 during the Implementation of the Utilization of Returnable Material)
      GRYC, Karel, Ladislav SOCHA, Roman KUBEŠ, Václav SOCHACKÝ, Kamil KOZA and Jaromír TROBL. Zajištění stabilní produkce silnostěnných odlitků ze slitiny ZP0410 při implementaci využití vratného materiálu (Ensuring Stable Production of Thick-walled Castings of Alloy ZP0410 during the Implementation of the Utilization of Returnable Material). Hutnické listy. 2021, LXXIV, 5-6, p. 22-28. ISSN 0018-8069.
      URL
      Name (in English): Ensuring Stable Production of Thick-walled Castings of Alloy ZP0410 during the Implementation of the Utilization of Returnable Material
      RIV: Article in a journal. Czech. Czech Republic.
      Gryc, Karel (203 Czech Republic, guarantor, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Koza, Kamil (203 Czech Republic, belonging to the institution)
      Keywords in English: zinc alloys; melting; recycling; returnable material; castings; chemical composition; quality
      Changed by: Ing. Barbora Langšádlová, učo 16591. Changed: 14/4/2025 09:59.
      More: https://is.vstecb.cz/publication/75381/en

    2019

    1. Implementation Aspects of the Remelting Material in the Production of High Pressure Die Casts on the Aluminum Based Alloys
      MAJERNÍK, Ján, Martin PODAŘIL, Ladislav SOCHA and Karel GRYC. Implementation Aspects of the Remelting Material in the Production of High Pressure Die Casts on the Aluminum Based Alloys. Online. In neuvedeno. METAL 2019 - 28th International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER Ltd., 2019, p. 1652 - 1657. ISBN 978-80-87294-92-5.
      Name in Czech: Aspekty zavádění vratného materiálu pťi výrobě tlakově litých odlitků na bázi hliníkových slitin
      RIV/75081431:_____/19:00001459 Proceedings paper. English. Czech Republic.
      Majerník, Ján (703 Slovakia, guarantor, belonging to the institution) -- Podařil, Martin (703 Slovakia, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution)
      Keywords in English: high pressure die casting; remelting material; mechanical properties; casts quality; aluminum alloys
      Type of proceedings: post-proceedings
      Changed by: Ing. Anna Palokha, učo 18083. Changed: 26/3/2020 10:46.
      More: https://is.vstecb.cz/publication/53181/en
    2. THE INFLUENCE OF PARAMETERS OF ARGON PURGING PROCESS THROUGH LADLE ON THE PHENOMENA OCCURING IN THE AREA OF PHASE DISTRIBUTIONS: LIQUID STEEL-SLAG
      PIEPRZYCA, Jacek, Tomasz MERDER, Mariola SATERNUS, Karel GRYC and Ladislav SOCHA. THE INFLUENCE OF PARAMETERS OF ARGON PURGING PROCESS THROUGH LADLE ON THE PHENOMENA OCCURING IN THE AREA OF PHASE DISTRIBUTIONS: LIQUID STEEL-SLAG. ARCHIVES OF METALLURGY AND MATERIALS. Polsko: POLSKA AKAD NAUK, POLISH ACAD SCIENCES, INST METALL & MATER SCI PAS, PL, 00-901 WARSZAWA, POLAND, 2019, vol. 64, No 2, p. 653-658. ISSN 1733-3490. Available from: https://dx.doi.org/10.24425/amm.2019.127594.
      URL
      Name in Czech: VLIV PARAMETRŮ PROCESU ARGONOVÉHO NÁKUPU PROSTŘEDNICTVÍM FENOMÉNU V OBLASTI FÁZOVÝCH DISTRIBUCÍ: KVAPALNÁ OCELOVÁ STRUSKA
      RIV/75081431:_____/19:00001662 Article in a journal. English. Poland.
      Pieprzyca, Jacek (616 Poland, guarantor) -- Merder, Tomasz (616 Poland) -- Saternus, Mariola (616 Poland) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: steelmaking; ladle; slag; physical modelling; FLUID-FLOW; RTD CURVES; DISPERSION; MODEL
      Changed by: Ing. Anna Palokha, učo 18083. Changed: 22/4/2020 14:05.
      More: https://is.vstecb.cz/publication/51962/en

    2018

    1. COMPARISON OF LIQUIDUS AND SOLIDUS TEMPERATURES OF CONTINUOUSLY CAST STEELS DETERMINED BY DIFFERENT THERMO-ANALYTICAL METHODS
      GRYC, Karel, Karel MICHALEK, Ladislav SOCHA, Michaela STROUHALOVÁ and Bedřich SMETANA. COMPARISON OF LIQUIDUS AND SOLIDUS TEMPERATURES OF CONTINUOUSLY CAST STEELS DETERMINED BY DIFFERENT THERMO-ANALYTICAL METHODS. In 27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018). Česká republika: TANGER LTD, KELTICKOVA 62, SLEZSKA, OSTRAVA 710 00, CZECH REPUBLIC, 2018, p. 128-135. ISBN 978-80-87294-84-0.
      Name in Czech: POROVNÁNÍ TEPLOT LIKVIDU A SOLIDU SOUVISEJÍCÍCH CASTOVÝCH OCELÍ ZARUČENÝCH RŮZNOU TERMO-ANALYTICKOU METODOU
      RIV/75081431:_____/18:00001665 Proceedings paper. English. Czech Republic.
      Gryc, Karel (203 Czech Republic, guarantor, belonging to the institution) -- Michalek, Karel (203 Czech Republic) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Strouhalová, Michaela (203 Czech Republic) -- Smetana, Bedřich (203 Czech Republic)
      Keywords in English: Steel; solidus temperature; liquidus temperature; thermal analysis; thermodynamic calculations
      Type of proceedings: post-proceedings
      Changed by: Ing. Anna Palokha, učo 18083. Changed: 8/1/2020 14:42.
      More: https://is.vstecb.cz/publication/51965/en
    2. Changes in Eutectic Silumin Structure Depending on Gate Geometry and Its Effect on Me-chanical Properties of Casting
      MAJERNÍK, Ján, Štefan GAŠPÁR, Karel GRYC and Ladislav SOCHA. Changes in Eutectic Silumin Structure Depending on Gate Geometry and Its Effect on Me-chanical Properties of Casting. Manufacturing technology. Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2018, vol. 18, No 3, p. 439-443. ISSN 1213-2489.
      Name in Czech: Změny struktury eutektických silumínů v závislosti na geometrii naříznutí a jejích vliv na mechanické vlastnosti odlitku
      RIV/75081431:_____/18:00001300 Article in a journal. English. Czech Republic.
      Majerník, Ján (703 Slovakia, guarantor, belonging to the institution) -- Gašpár, Štefan (703 Slovakia) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Socha, Ladislav (203 Czech Republic, belonging to the institution)
      Keywords in English: high pressure die casting; mechanical properties; eutectic structure; gate
      Changed by: Mgr. Eva Hynešová, učo 23116. Changed: 3/10/2018 14:41.
      More: https://is.vstecb.cz/publication/44861/en
    3. INFLUENCE OF REFINING ON ACHIEVING LOW OXYGEN CONTENTS AT PRODUCTION OF SPECIAL STEELS FOR ENERGETIC INDUSTRY
      ODEHNAL, Josef, Ladislav SOCHA, Karel GRYC, Richard ŠURAL, Jiří BULÍN and Jaroslav STRAKA. INFLUENCE OF REFINING ON ACHIEVING LOW OXYGEN CONTENTS AT PRODUCTION OF SPECIAL STEELS FOR ENERGETIC INDUSTRY. In 27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018). Česká republika: TANGER LTD, KELTICKOVA 62, SLEZSKA, OSTRAVA 710 00, CZECH REPUBLIC, 2018, p. 93-101. ISBN 978-80-87294-84-0.
      Name in Czech: Vliv rafinace na dosahování nízkých obsahů kyslíku při výrobě speciálních ocelí pro energetický průmysl
      RIV/75081431:_____/18:00001664 Proceedings paper. English. Czech Republic.
      Odehnal, Josef (203 Czech Republic, guarantor) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Gryc, Karel (203 Czech Republic, belonging to the institution) -- Šural, Richard (203 Czech Republic) -- Bulín, Jiří (203 Czech Republic) -- Straka, Jaroslav (203 Czech Republic)
      Keywords in English: Steel; slag; secondary metallurgy; non-metallic inclusions; micro cleanness
      Type of proceedings: post-proceedings
      Changed by: Ing. Anna Palokha, učo 18083. Changed: 8/1/2020 14:41.
      More: https://is.vstecb.cz/publication/51964/en
    4. INTENSIVELY COOLED INGOT DURING CASTING AND SOLIDIFICATION AND ITS INTERNAL HOMOGENEITY PREDICTING BY USING NUMERICAL SIMULATION IN MAGMA 5 SOFTWARE
      PINDOR, Jaroslav, Vladislav KURKA, René PYSZKO, Ladislav SOCHA and Jana KOSŇOVSKÁ. INTENSIVELY COOLED INGOT DURING CASTING AND SOLIDIFICATION AND ITS INTERNAL HOMOGENEITY PREDICTING BY USING NUMERICAL SIMULATION IN MAGMA 5 SOFTWARE. In 27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018). Česká republika: TANGER LTD, KELTICKOVA 62, SLEZSKA, OSTRAVA 710 00, CZECH REPUBLIC, 2018, p. 81-86. ISBN 978-80-87294-84-0.
      Name in Czech: INTENZIVNĚ CHLAZENÝ INGOT BĚHEM CASTINGU A SOLIDIFIKACE A JEHO VNITŘNÍ HOMOGENEITA PREDICTOVÁNÍ VYUŽITÍM NUMERICKÉ SIMULACE V SOFTWARU MAGMA 5
      RIV/75081431:_____/18:00001663 Proceedings paper. English. Czech Republic.
      Pindor, Jaroslav (203 Czech Republic, guarantor) -- Kurka, Vladislav (203 Czech Republic) -- Pyszko, René (203 Czech Republic) -- Socha, Ladislav (203 Czech Republic, belonging to the institution) -- Kosňovská, Jana (203 Czech Republic)
      Keywords in English: Cooling; steel; water; simulation; structure
      Type of proceedings: post-proceedings
      Changed by: Ing. Anna Palokha, učo 18083. Changed: 8/1/2020 14:41.
      More: https://is.vstecb.cz/publication/51963/en
Displayed: 8/5/2025 10:31