J 2025

Post-Curing Effects on the Tensile Properties of Hybrid Fiber-Reinforced Polymers: Experimental and Numerical Insights

ZAINI, Mohammed; Oumayma HAMLAOUI; Jalal CHAFIQ; Mohamed Ait EL FQIH; Mohamed IDIRI et al.

Základní údaje

Originální název

Post-Curing Effects on the Tensile Properties of Hybrid Fiber-Reinforced Polymers: Experimental and Numerical Insights

Autoři

ZAINI, Mohammed; Oumayma HAMLAOUI; Jalal CHAFIQ; Mohamed Ait EL FQIH; Mohamed IDIRI; Said AQIL; Mohamed Karim HAJJI; Alperen BAL; Hakan TOZAN; Marta HARNIČÁROVÁ a Jan VALÍČEK

Vydání

Polymers, 2025, 2073-4360

Další údaje

Jazyk

angličtina

Typ výsledku

Článek v odborném periodiku

Obor

20501 Materials engineering

Stát vydavatele

Švýcarsko

Utajení

není předmětem státního či obchodního tajemství

Odkazy

Impakt faktor

Impact factor: 4.900 v roce 2024

Označené pro přenos do RIV

Ano

Kód RIV

RIV/75081431:_____/25:00002873

Organizační jednotka

Vysoká škola technická a ekonomická v Českých Budějovicích

Klíčová slova anglicky

basalt; carbon; composites; epoxy; fiberglass; hybrid; jute; temperature; tensile strength

Štítky

Změněno: 20. 5. 2025 09:02, Ing. Barbora Langšádlová

Anotace

V originále

This study investigates the effects of post-curing temperatures on the tensile properties of hybrid basalt-jute-glass-carbon fiber-reinforced polymers (FRPs). Composite specimens were post-cured at 60 degrees C and 100 degrees C for 60 min, and their tensile behavior was assessed using a servo-hydraulic testing machine. Numerical simulations using the Abaqus software V6.14 were also conducted to compare experimental and computational results. The findings indicate that post-curing heat treatment enhances ductility due to increased polymer cross-linking, but excessive heat treatment at 100 degrees C negatively impacts elongation at fracture. The results revealed that specimens post-cured at 60 degrees C exhibited the optimal balance between strength and ductility, with increased elongation and moderate tensile strength. However, at 100 degrees C, while tensile strength improved in some cases, a significant decrease in elasticity and an increased risk of brittleness were observed, suggesting that extreme heat treatment may degrade polymer integrity. Natural fiber composites, particularly jute-based samples, outperformed synthetic composites in terms of elongation and overall mechanical stability. The numerical simulations provided further insights but showed discrepancies with experimental results, mainly due to fiber property variations and fabric waviness, underscoring the challenges of accurately modeling woven composites. The study highlights the importance of controlled post-curing temperatures in optimizing the mechanical performance of FRP composites, with 60 degrees C identified as the most effective condition for achieving a favorable balance between tensile strength, flexibility, and material durability. These findings offer valuable insights for material scientists and engineers working on the development of high-performance composite materials for structural and industrial applications.

Přiložené soubory

polymers-17-01261.pdf
Požádat o autorskou verzi souboru