2022
COMBINATION OF SURFACE AND VOLUME ANALYSIS METHODS IN THE STUDY OF THE QUALITY OF THIN-WALLED CASTINGS FROM ZP0410 ALLOY
GRYC, Karel; Ladislav SOCHA; Roman KUBEŠ; Václav SOCHACKÝ; Kamil KOZA et al.Základní údaje
Originální název
COMBINATION OF SURFACE AND VOLUME ANALYSIS METHODS IN THE STUDY OF THE QUALITY OF THIN-WALLED CASTINGS FROM ZP0410 ALLOY
Autoři
Vydání
Ostrava, Czech Republic, EU, METAL 2022 Conference Proceedings, od s. 708-713, 884 s. 2022
Nakladatel
Tanger Ltd.
Další údaje
Jazyk
angličtina
Typ výsledku
Stať ve sborníku
Obor
20501 Materials engineering
Stát vydavatele
Česká republika
Utajení
není předmětem státního či obchodního tajemství
Forma vydání
elektronická verze "online"
Odkazy
Označené pro přenos do RIV
Ano
Kód RIV
RIV/75081431:_____/22:00002835
Organizační jednotka
Vysoká škola technická a ekonomická v Českých Budějovicích
ISSN
UT WoS
Klíčová slova anglicky
Zinc alloys; melting; casting; recycling; returnable material
Štítky
Návaznosti
TH04020055, projekt VaV.
Změněno: 10. 4. 2025 10:31, Ing. Barbora Langšádlová
Anotace
V originále
The technology of high-pressure die casting thin-walled castings requires increased demands on the stability of technological processes and pressure casting parameters. The wall thickness of the studied zinc alloy castings (ZP0410) ranges from 0.4 to 1.2 mm. In general, it is necessary to use higher mould operating temperatures and a higher casting speed when filling the mould cavity when casting thin-walled castings. There is an increased load on the mould (tool) and the die casting machine during this casting process and the use of more demanding parameters. It results in a shortening of mould service life. There is currently no own returnable material (alloy ZP0410) used in the given production conditions in the production of thin-walled castings. Only the primary alloy ZL0410 is used now. It must be emphasized that the ability to implement the recycling of these returnable materials is becoming increasingly important. However, it is necessary to ensure that the quality of production is not reduced. The research was carried out aimed at determining the current state. Methods of roughness analysis, computed tomography, and metallography of casting defects from casting machine failures even after plating are used in the study of existing production technology in addition to standard long-term monitoring of melt quality. The findings of these research activities were briefly summarized in the paper. The experimental development of the technology of using our own returnable material in this quality-intensive production is in progress now.