J 2024

Physical modeling of two-phase liquid-gas processes occurring in the refining ladle for Fe-Si alloy refining process

MERDER, Tomasz; Sławomir KOZŁOWSKI; Jacek PIEPRZYCA; Mariola SATERNUS; Agnieszka SOBIANOWSKA‑TUREK et al.

Basic information

Original name

Physical modeling of two-phase liquid-gas processes occurring in the refining ladle for Fe-Si alloy refining process

Name in Czech

Fyzikální modelování dvoufázových procesů kapalina-plyn probíhajících v rafinační pánvi pro proces rafinace slitin Fe-Si

Authors

MERDER, Tomasz; Sławomir KOZŁOWSKI; Jacek PIEPRZYCA; Mariola SATERNUS; Agnieszka SOBIANOWSKA‑TUREK and Ladislav SOCHA

Edition

SCIENTIFIC REPORTS, GERMANY, BERLIN, NATURE PORTFOLIO, 2024, 2045-2322

Other information

Language

English

Type of outcome

Article in a journal

Field of Study

20500 2.5 Materials engineering

Country of publisher

Germany

Confidentiality degree

is not subject to a state or trade secret

References:

Impact factor

Impact factor: 3.900

Marked to be transferred to RIV

Yes

RIV identification code

RIV/75081431:_____/24:00002831

Organization unit

Institute of Technology and Business in České Budějovice

Keywords (in Czech)

Ocel, feroslitiny; ferosilicium; rafinační plyn; vodní modely; fyzikální modelování

Keywords in English

Steel; Ferroalloys; Ferrosilicon; Refining gas; Water models; Physical modelling
Changed: 2/4/2025 15:04, Ing. Barbora Langšádlová

Abstract

In the original language

The article presents the results of research carried out using a water model of a refining ladle for the Fe–Si ferroalloys treatment. These studies were aimed at improving the efficiency of refining and homogenization of liquid Fe–Si ferroalloy in the refining ladle by using a new method of blowing gas through a system of nozzles installed at the bottom of the ladle. The obtained results allowed to determine the proper location of the plug at the bottom of the refining ladle and the possibility of using combined blowing. The tests were carried out for a refining ladle with a capacity of 3 m3 using a physical model on a linear scale of 1:3. The gas flow rate used in the model corresponded proportionally to the value previously used in industrial practice and amounted to 26.8 l/min. Experiments were performed for both combined blowing applications and through a purging plug at the bottom of the ladle. In the case of combined blowing, the volume of the gas stream was divided into two blowing sources (lance and purging plug). As a result of laboratory tests, one of the variants was selected and tested in industrial conditions. These studies confirmed the improvement in the efficiency of refining treatment of the FeSi alloy in terms of reducing the carbon and aluminum content in the alloy.x

In Czech

Článek prezentuje výsledky výzkumu provedeného na vodním modelu rafinační pánve pro úpravu Fe-Si feroslitin. Tyto studie byly zaměřeny na zvýšení účinnosti rafinace a homogenizace kapalné Fe-Si feroslitiny v rafinační pánvi pomocí nové metody ofukování. plynu přes systém trysek instalovaných na dně pánve. Získané výsledky umožnily určit správné umístění zátky na dně rafinační pánve a možnost použití kombinovaného ofukování. Zkoušky byly provedeny pro rafinační pánev o objemu 3 m3 s použitím fyzikálního modelu v lineárním měřítku 1:3. Průtok plynu použitý v modelu úměrně odpovídal hodnotě dříve používané v průmyslové praxi a činil 26,8 l/min. Experimenty byly prováděny jak pro kombinované aplikace vyfukování, tak prostřednictvím proplachovací zátky při na dně pánve. V případě kombinovaného ofukování byl objem proudu plynu rozdělen na dva zdroje ofukování (kopí a proplachovací zátka). Na základě laboratorních zkoušek byla vybrána jedna z variant, která byla testována v průmyslových podmínkách. Tyto studie potvrdily zlepšení účinnosti rafinační úpravy slitiny FeSi z hlediska snížení obsahu uhlíku a hliníku ve slitině.x

Files attached

Physical_modeling_of_two_phase.pdf
Request the author's version of the file