2025
Experimental Insights into Free Orthogonal Cutting of Stellite
GOMBÁR, Miroslav; Marta HARNIČÁROVÁ; Jan VALÍČEK; Milena KUŠNEROVÁ; Hakan TOZAN et al.Basic information
Original name
Experimental Insights into Free Orthogonal Cutting of Stellite
Name in Czech
Experimentální poznatky o volném ortogonálním řezání stellitu
Authors
Edition
Materials, Basilej, Švýcarsko, MDPI, 2025, 1996-1944
Other information
Language
English
Type of outcome
Article in a journal
Field of Study
20300 2.3 Mechanical engineering
Country of publisher
Switzerland
Confidentiality degree
is not subject to a state or trade secret
References:
Impact factor
Impact factor: 3.200 in 2024
Marked to be transferred to RIV
Yes
RIV identification code
RIV/75081431:_____/25:00002800
Organization unit
Institute of Technology and Business in České Budějovice
UT WoS
Keywords (in Czech)
ortogonální řezání; Stellite 6; opotřebení; drsnost povrchu; HP/HVOF
Keywords in English
orthogonal cutting; Stellite 6; wear; surface roughness; HP/HVOF
Changed: 27/3/2025 13:08, Ing. Barbora Langšádlová
In the original language
The effectiveness of a machining process can be determined by analysing the quality of the generated surface and the rate of tool wear. Stellite is highly challenging to machine, which is why it is primarily processed through grinding methods. This study concentrates on the impact of cutting parameters and tool wear (VBb, KBb) on the created surface roughness surface (Rt, Ra, Rz) during the orthogonal cutting of Stellite 6, which is overlaid on a steel surface, C45, prepared by means of HP/HVOF (JP-5000). The results indicate that the dominant influence on the change in the total roughness profile height value (Rt) is the mutual interaction of cutting speed and depth of cut at 16% (p < 0.000). The greatest impact on the change in the mean arithmetic deviation of the roughness profile (Ra) value is the interaction of cutting speed, tool front angle, and depth of cut with a 15% share (p < 0.000), as well as on the change in the Rz value (15%) and tool wear VBb (25%). This investigation lays the groundwork for potentially substituting the processing of flat surfaces with hardened layers created by thermal spraying (such as Stellite 6) with grinding or methods that offer greater efficiency from both economic and technological perspectives.
In Czech
Účinnost obráběcího procesu lze určit analýzou kvality vzniklého povrchu a rychlosti opotřebení nástroje. Stellite je velmi obtížné obrábět, a proto je převážně zpracováván broušením. Tato studie se zaměřuje na vliv řezných parametrů a opotřebení nástroje (VBb, KBb) na vznikající drsnost povrchu (Rt, Ra, Rz) při ortogonálním řezání Stellite 6, který je nanesen na ocelový povrch C45, připravený metodou HP/HVOF (JP-5000). Výsledky naznačují, že dominantní vliv na změnu hodnoty celkové výšky profilu drsnosti (Rt) má vzájemná interakce řezné rychlosti a hloubky řezu ve výši 16 % (p < 0,000). Největší vliv na změnu průměrné aritmetické odchylky hodnoty profilu drsnosti (Ra) má interakce řezné rychlosti, úhlu čela nástroje a hloubky řezu s podílem 15 % (p < 0,000), stejně jako na změnu hodnoty Rz (15 %) a opotřebení nástroje VBb (25 %). Tato studie vytváří základ pro potenciální nahrazení zpracování plochých povrchů s kalenými vrstvami vytvořenými tepelným nástřikem (například Stellite 6) broušením nebo metodami, které nabízejí větší efektivitu z ekonomického i technologického hlediska.