V originále
In current time, there is a need for an affordable housing which must respect, on the one hand, requirements of overcrowded urban areas and, on the other hand, demands for modern buildings with low energy consumption. The number of old buildings must therefore give way to modern ones. Demolition waste emerging during pulling down of substandard buildings may after further processing constitute a potential source of filling materials which can preserve our resources of virgin aggregates. In the paper, the recycled aggregate obtained as a sub-fraction of processed demolition waste served as the substitution material instead of the natural aggregate for cement-based composites. Natural filler in the fraction 0/2 mm was replaced by the recycled one in the volumetric amount of 0-100 %, and on 28 days water cured samples physical, strength and thermal-transport related properties were assessed. Performed experiments showed a high potential of fine recycled filler which can effectively reduce the weight of produced composites but, on the other hand, partially mitigate their strength properties. Higher rate of open porosity caused by replacing material helped importantly improve thermal performance of hardened composites up to 30 %, versus plain dense mortar. There was made new type of cement-base mortars which for repairing of masonry structures can be intended.