J 2022

Increasing the wear resistance of surface layers of selected steels by TIG electric arc surface remelting process using a powder based on CaCN2

KOVÁČ, Ivan; Rastislav MIKUŠ; Jozef ŽARNOVSKÝ; Róbert DRLIČKA; Marta HARNIČÁROVÁ et al.

Základní údaje

Originální název

Increasing the wear resistance of surface layers of selected steels by TIG electric arc surface remelting process using a powder based on CaCN2

Autoři

KOVÁČ, Ivan; Rastislav MIKUŠ; Jozef ŽARNOVSKÝ; Róbert DRLIČKA; Marta HARNIČÁROVÁ; Jan VALÍČEK a Milan KADNÁR

Vydání

The International Journal of Advanced Manufacturing Technology, Londýn, Spojené království Velké Británi, SPRINGER LONDON LTD, 2022, 0268-3768

Další údaje

Jazyk

angličtina

Typ výsledku

Článek v odborném periodiku

Obor

20501 Materials engineering

Stát vydavatele

Velká Británie a Severní Irsko

Utajení

není předmětem státního či obchodního tajemství

Odkazy

Impakt faktor

Impact factor: 3.400

Označené pro přenos do RIV

Ano

Kód RIV

RIV/75081431:_____/22:00002448

Organizační jednotka

Vysoká škola technická a ekonomická v Českých Budějovicích

EID Scopus

Klíčová slova anglicky

TIG surface remelting; CaCN2-based powder; Hardness; Wear resistance

Štítky

Změněno: 22. 3. 2023 20:17, Mgr. Nikola Petříková

Anotace

V originále

In technical practice, increasing wear resistance can be done in a variety of methods. However, most of them are technologically, time, and energy intensive, and the costs incurred frequently outweigh the benefits received. This study aims at surface modification of the selected grades of steels (25CrMo4, 30CrMoV9, 41CrAlMo7) through the TIG (tungsten inert gas) remelting process using a CaCN2-based powder. TIG remelting process was conducted in the shielding atmosphere of 99.996% argon (argon 4.6) at a gas flow of 10 l center dot min(-1) and a welding current of 110 A. After remelting, the microstructure of the generated layers was analysed using scanning electron microscopy (SEM) and the hardness of newly formed layers was evaluated using a microhardness machine. In all of the tested steels, nitrogen had a favourable impact on the rise in hardenability, which resulted in a notable increase in hardness and resistance to abrasive wear. A significant increase in hardness and abrasive wear resistance was achieved up to a depth of 1-1.5 mm from the surface in the case of all steels through the remelting process. The effect of nitrogen on the increase in the investigated properties is documented by a comparison of samples remelted in the absence and presence of CaCN2-based powder. The most significant increases of both parameters under investigation were attained in 25CrMo4 steel, which had the most considerable nitrogen enrichment. This method represents a cheap, technologically available, and fast way of forming surface layers with increased hardness and wear resistance, which makes it applicable in engineering, agriculture, earthworks, etc.

Přiložené soubory

s00170-022-10316-x.pdf
Požádat o autorskou verzi souboru