2022
Aluminum Melt Degassing Process Evaluation Depending on the Design and the Degree of the FDU Unit Graphite Rotor Wear
PODAŘIL, Martin; Ján MAJERNÍK; Rudolf KAMPF; Ladislav SOCHA; Karel GRYC et al.Basic information
Original name
Aluminum Melt Degassing Process Evaluation Depending on the Design and the Degree of the FDU Unit Graphite Rotor Wear
Authors
PODAŘIL, Martin; Ján MAJERNÍK; Rudolf KAMPF; Ladislav SOCHA; Karel GRYC; Tomáš PRÁŠIL and Martin GRÁF
Edition
Materials, Switzerland, MDPI, 2022, 1996-1944
Other information
Language
English
Type of outcome
Article in a journal
Field of Study
20301 Mechanical engineering
Country of publisher
Switzerland
Confidentiality degree
is not subject to a state or trade secret
References:
Impact factor
Impact factor: 3.400
Marked to be transferred to RIV
Yes
RIV identification code
RIV/75081431:_____/22:00002297
Organization unit
Institute of Technology and Business in České Budějovice
UT WoS
EID Scopus
Keywords in English
aluminum alloys; refining; melt degassing; FDU unit; graphite rotor
Links
TH04010449, research and development project.
Changed: 21/3/2023 18:31, Mgr. Nikola Petříková
Abstract
In the original language
One of the most important indicators of casting quality is porosity. The formation of pores is largely conditioned by the presence of hydrogen in the batch and subsequently in the melt. The gasification of the melt is the primary factor increasing the porosity of casts. This paper addresses the issue of reducing the melt gasification by using FDU (Foundry Degassing Unit) unit. The gas content in the melt is evaluated by determining the Dichte Index depending on the geometry and the degree of the FDU unit rotor wear. For experiments performed under the operating conditions, three types of graphite rotors with different geometries are used. The extent of melt gasification and the Dichte Index are monitored during the rotor wear, at a rate of 0%, 25%, 50%, 75% and 100% rotor wear. Secondly, the chemical composition of the melt is monitored depending on the design and wear of the rotor. It is proven that the design and the degree of rotor wear do not have significant effect on the chemical composition of the melt and all evaluated samples fell within the prescribed quality in accordance with EN 1706. With regard to the overall comparison of the geometry and wear of individual rotor types, it has been proven that, in terms of efficiency, the individual rotors are mutually equivalent and meet the requirements for melt degassing throughout the service life.