J 2022

Prediction of the fuel spray characteristics in the combustion chamber with methane and TiO2 nanoparticles via numerical modelling

SHAO, Dongwei; Sami AL OBAID; Alharbi SULAIMAN ALI; Josef MAROUŠEK; Manigandan SEKAR et al.

Základní údaje

Originální název

Prediction of the fuel spray characteristics in the combustion chamber with methane and TiO2 nanoparticles via numerical modelling

Autoři

SHAO, Dongwei; Sami AL OBAID; Alharbi SULAIMAN ALI; Josef MAROUŠEK; Manigandan SEKAR; Palanikumar GUNASEKAR; Thuy Lan Chi NGUYEN; Brindhadevi KATHIRVEL; Junfa WANG a Donghua JIANG

Vydání

Fuel, Netherlands, Elsevier BV, 2022, 0016-2361

Další údaje

Jazyk

angličtina

Typ výsledku

Článek v odborném periodiku

Obor

20704 Energy and fuels

Stát vydavatele

Nizozemské království

Utajení

není předmětem státního či obchodního tajemství

Odkazy

Impakt faktor

Impact factor: 7.400

Označené pro přenos do RIV

Ano

Kód RIV

RIV/75081431:_____/22:00002368

Organizační jednotka

Vysoká škola technická a ekonomická v Českých Budějovicích

EID Scopus

Klíčová slova anglicky

Spray velocity; Methane; Combustion; Nanoparticles; Reaction rates; Numerical modelling

Štítky

Změněno: 20. 3. 2023 20:06, Mgr. Nikola Petříková

Anotace

V originále

In this study the methane combustion was analysed with the TiO2 nanoparticles. A series of the simulation runs were performed by varying the fuel inlet velocity. However, the oxidizer and the nanoparticles spray were maintained constant for the entire run. The spray velocity varied from 100 m/s to 200 m/s with titanium dioxide (TiO2) nanoparticles. Using the series of the governing equation and modified Navier Stokes equation the model has been developed with the aid of numerical workbench. Three different domains are generated for fuel, oxidizer and nanoparticles. The velocity of the air and nanoparticles were maintained at constant levels and varying only the spray velocity of the fuel. Based on the findings, the mass fraction of both fuel and formation of the CO2 were dependent on the spray velocity. As the spray velocity increases the turbulence in the combustion chamber increases which ensures the higher mixing of both air-fuel and nanoparticles. From the procured findings 175 m/s and 200 m/s were the ideal range for better combustion efficiency compared to 100 m/s and 150 m/s. The simulation results have ascertained the role of the spray velocity on the emissions and the combustion efficiency of the engine. It is hoped that obtained results can provide directions to work on the combustion of the methane with the nanoparticles at the optimized spray velocity.

Přiložené soubory

08_Prediction_of_the_fuel_spray_characteristics_in_the_combustion_chamber_with_methane_and_TiO2_nanoparticles_via_numerical_modelling__1_.pdf
Požádat o autorskou verzi souboru