J 2022

COMPARISON OF POROSITY OF CASTS PRODUCED BY HPDC AND VPDC TECHNOLOGIES

GAŠPÁR, Gašpár; Ján MAJERNÍK; Mirosław TUPAJ a Martin PODAŘIL

Základní údaje

Originální název

COMPARISON OF POROSITY OF CASTS PRODUCED BY HPDC AND VPDC TECHNOLOGIES

Autoři

GAŠPÁR, Gašpár; Ján MAJERNÍK; Mirosław TUPAJ a Martin PODAŘIL

Vydání

MM SCIENCE JOURNAL, Prague, MM Science, PRIPOCNI 1519-10A, PRAGUE 10 10100, CZECH REPUBLIC, 2022, 1803-1269

Další údaje

Jazyk

angličtina

Typ výsledku

Článek v odborném periodiku

Obor

20301 Mechanical engineering

Stát vydavatele

Česká republika

Utajení

není předmětem státního či obchodního tajemství

Odkazy

Impakt faktor

Impact factor: 0.700

Označené pro přenos do RIV

Ano

Kód RIV

RIV/75081431:_____/22:00002282

Organizační jednotka

Vysoká škola technická a ekonomická v Českých Budějovicích

Klíčová slova anglicky

Vacuum Pressure Die Casting (VPDC); High Pressure Die Casting (HPDC); Porosity; Gas Entrapment; Zinc Alloys

Štítky

Změněno: 4. 4. 2022 08:17, Mgr. Nikola Petříková

Anotace

V originále

The die casting technology enables the production of complex casts with good mechanical properties and high repeatability of the production within narrow tolerance limits. However, the casts are showing signs of porosity to some extent, which may reduce their mechanical and qualitative properties. The presented article solves the problem of reducing the porosity f the high pressure die casts by vacuuming the mold. Under constants technological parameters of casting, series of casts are being casted using the HPDC and VPDC technology. The indirect method of verifying the density and volume of individual samples is used to analyze the porosity of casts. At the same time, a macroscopic examination of the homogeneity of the casts is performed on selected samples. Macroscopic examination showed a detectable decrease in pore size and distribution in the casts. Based on the measurements, i tis proved that by using the vacuum pressure die casting process while maintaining the constant settings of the technological parameters of casting, a reduction in the porosity of the casts by an average of 24.4 % was achieved

Přiložené soubory

mmscience_2022-03_comparison-of-porosity-of-casts-produced-by-hpdc-and-vpdc-technologies__1_.pdf
Požádat o autorskou verzi souboru