2022
COMPARISON OF POROSITY OF CASTS PRODUCED BY HPDC AND VPDC TECHNOLOGIES
GAŠPÁR, Gašpár; Ján MAJERNÍK; Mirosław TUPAJ and Martin PODAŘILBasic information
Original name
COMPARISON OF POROSITY OF CASTS PRODUCED BY HPDC AND VPDC TECHNOLOGIES
Authors
GAŠPÁR, Gašpár; Ján MAJERNÍK; Mirosław TUPAJ and Martin PODAŘIL
Edition
MM SCIENCE JOURNAL, Prague, MM Science, PRIPOCNI 1519-10A, PRAGUE 10 10100, CZECH REPUBLIC, 2022, 1803-1269
Other information
Language
English
Type of outcome
Article in a journal
Field of Study
20301 Mechanical engineering
Country of publisher
Czech Republic
Confidentiality degree
is not subject to a state or trade secret
References:
Impact factor
Impact factor: 0.700
Marked to be transferred to RIV
Yes
RIV identification code
RIV/75081431:_____/22:00002282
Organization unit
Institute of Technology and Business in České Budějovice
UT WoS
Keywords in English
Vacuum Pressure Die Casting (VPDC); High Pressure Die Casting (HPDC); Porosity; Gas Entrapment; Zinc Alloys
Changed: 4/4/2022 08:17, Mgr. Nikola Petříková
Abstract
In the original language
The die casting technology enables the production of complex casts with good mechanical properties and high repeatability of the production within narrow tolerance limits. However, the casts are showing signs of porosity to some extent, which may reduce their mechanical and qualitative properties. The presented article solves the problem of reducing the porosity f the high pressure die casts by vacuuming the mold. Under constants technological parameters of casting, series of casts are being casted using the HPDC and VPDC technology. The indirect method of verifying the density and volume of individual samples is used to analyze the porosity of casts. At the same time, a macroscopic examination of the homogeneity of the casts is performed on selected samples. Macroscopic examination showed a detectable decrease in pore size and distribution in the casts. Based on the measurements, i tis proved that by using the vacuum pressure die casting process while maintaining the constant settings of the technological parameters of casting, a reduction in the porosity of the casts by an average of 24.4 % was achieved