2021
Influence of runner cross-section on air entrapment in pressure die casts volume
GAŠPÁR, Štefan; Ján MAJERNÍK; Tomáš CORANIČ and Ján PAŠKOBasic information
Original name
Influence of runner cross-section on air entrapment in pressure die casts volume
Authors
GAŠPÁR, Štefan; Ján MAJERNÍK; Tomáš CORANIČ and Ján PAŠKO
Edition
MM Science Journal, Praha, MM publishing Ltd. 2021, 1803-1269
Other information
Language
English
Type of outcome
Article in a journal
Field of Study
20301 Mechanical engineering
Country of publisher
Czech Republic
Confidentiality degree
is not subject to a state or trade secret
References:
Marked to be transferred to RIV
Yes
RIV identification code
RIV/75081431:_____/21:00002099
Organization unit
Institute of Technology and Business in České Budějovice
UT WoS
Keywords in English
Air entrapment; HPDC; Runner dimensions
Changed: 25/6/2021 09:38, Mgr. Nikola Petříková
Abstract
In the original language
Technology of metal die casting is characterized by production of casts complicated as to shape yet with positive mechanical properties and with high repeatability of production. However, casts are porous to a certain extent which eventually reduces their mechanical properties. One of the significant methods of porosity reduction of casts rests in correct design of a gating system. The submitted paper studies the influence of cross-section area of a runner on air entrapped in the cast volume. Seven alternatives of runners with the identical structural organization and variable cross-section area were compared. In case of a gating system design there was an assumption made that the runner with the largest cross section would deliver the lowest possible velocity to the melt before reaching the runner which would result in the lowest possible values of air entrapment. The air entrapment in the cast volume is evaluated behind the cores which were evaluated as critical points with regards to further processing. The results reached during examination of the melt flowing through runners proved the aforementioned assumption, yet the values of air entrapment in die casts volume did not show remarkable differences. In its final part, the paper clarifies the reached results and recommendations which should be taken into consideration when designing the gating system structure.