2021
Influence of runner cross-section on air entrapment in pressure die casts volume
GAŠPÁR, Štefan; Ján MAJERNÍK; Tomáš CORANIČ a Ján PAŠKOZákladní údaje
Originální název
Influence of runner cross-section on air entrapment in pressure die casts volume
Autoři
GAŠPÁR, Štefan; Ján MAJERNÍK; Tomáš CORANIČ a Ján PAŠKO
Vydání
MM Science Journal, Praha, MM publishing Ltd. 2021, 1803-1269
Další údaje
Jazyk
angličtina
Typ výsledku
Článek v odborném periodiku
Obor
20301 Mechanical engineering
Stát vydavatele
Česká republika
Utajení
není předmětem státního či obchodního tajemství
Odkazy
Označené pro přenos do RIV
Ano
Kód RIV
RIV/75081431:_____/21:00002099
Organizační jednotka
Vysoká škola technická a ekonomická v Českých Budějovicích
UT WoS
Klíčová slova anglicky
Air entrapment; HPDC; Runner dimensions
Změněno: 25. 6. 2021 09:38, Mgr. Nikola Petříková
Anotace
V originále
Technology of metal die casting is characterized by production of casts complicated as to shape yet with positive mechanical properties and with high repeatability of production. However, casts are porous to a certain extent which eventually reduces their mechanical properties. One of the significant methods of porosity reduction of casts rests in correct design of a gating system. The submitted paper studies the influence of cross-section area of a runner on air entrapped in the cast volume. Seven alternatives of runners with the identical structural organization and variable cross-section area were compared. In case of a gating system design there was an assumption made that the runner with the largest cross section would deliver the lowest possible velocity to the melt before reaching the runner which would result in the lowest possible values of air entrapment. The air entrapment in the cast volume is evaluated behind the cores which were evaluated as critical points with regards to further processing. The results reached during examination of the melt flowing through runners proved the aforementioned assumption, yet the values of air entrapment in die casts volume did not show remarkable differences. In its final part, the paper clarifies the reached results and recommendations which should be taken into consideration when designing the gating system structure.