J 2017

CRITICAL RUNNER LENGTH AS A CONSTRAINING FACTOR IN GATING SYSTEM DESIGN

MAJERNÍK, Ján; Ján KMEC and Monika KARKOVÁ

Basic information

Original name

CRITICAL RUNNER LENGTH AS A CONSTRAINING FACTOR IN GATING SYSTEM DESIGN

Name in Czech

KRITICKÁ DÉLKA VTOKOVÉHO KANÁLU JAKO KONSTRUKČNÍ FAKTOR V NÁVRHU SYSTÉMU NAVÁDĚNÍ

Authors

Edition

MM Science Journal, Praha, MM Science Journal, 2017, 1803-1269

Other information

Language

English

Type of outcome

Article in a journal

Field of Study

20501 Materials engineering

Country of publisher

Czech Republic

Confidentiality degree

is not subject to a state or trade secret

Marked to be transferred to RIV

Yes

RIV identification code

RIV/75081431:_____/17:00001438

Organization unit

Institute of Technology and Business in České Budějovice

EID Scopus

Keywords (in Czech)

vysokotlaké lití; vtokový kanál; konstrukce; tuhnutí; simulace

Keywords in English

high pressure die casting; runner; construction; solidification; simulation

Tags

Changed: 14/10/2019 08:45, Mgr. Blanka Mikšíková

Abstract

In the original language

The objective of gating system design and construction process using high pressure die casting is manufacturing of castings with good mechanical and quality properties. The design must take into account various parameters, ranging from the alloy properties through technical parameters of the casting cycle to the construction of the machine and the mould dimensions. If the design of gating system is meant for an existing mould, the runner length depends on the dimensions of the mould. If the design of gating system intends to use a new mould, the runner length depends on the alloy properties, mainly on the melt solidification time when passing the gating system. The article presented deals with the maximum allowed runner length and introduce and defines the term “critical runner length”. When designing gating system for a new type of casting, measures were taken using a simulation program, in order to identify the critical runner length, on which the design of mould multiplicity and placement of casting in the mould depend. The critical runner length is defined on the basis of the maximum melt temperature at selected parts of the gating system and the proportion of solid phase in the melt. Based on the measures taken, the temperatures of the melt are described in dependence on time, heat losses are determined in dependence on the runner length and subsequently the maximum allowed runner length is determined. The measurements, the results and conclusions described in the article are further directly implemented in the innovations of die casting in the production.

In Czech

Cílem projektování a konstrukce systému vrtání pomocí vysokotlakého lití je výroba odlitků s dobrými mechanickými a kvalitativními vlastnostmi. Konstrukce musí zohledňovat různé parametry, od vlastností slitiny přes technické parametry odlévacího cyklu až po konstrukci stroje a rozměry formy. Pokud je konstrukce vtokové soustavy určena pro existující formu, délka běhounu závisí na rozměrech formy. Pokud návrh systému vrat umožňuje použít novou formu, délka běhounu závisí na vlastnostech slitiny, zejména na době tuhnutí taveniny při procházení vtokové soustavy. Předložený článek se zabývá maximální povolenou délkou běhu a zavádí a definuje pojem "kritická délka běhu". Při navrhování systému zavírání pro nový typ odlitku byla provedena opatření pomocí simulačního programu, aby se zjistila kritická délka běhu, na které závisí návrh formy násobnosti a umístění odlitku do formy. Kritická délka běhu je definována na základě maximální teploty taveniny ve vybraných částech systému vtoku a podílu tuhé fáze v tavenině. Na základě provedených opatření jsou teploty taveniny popsány v závislosti na čase, tepelné ztráty jsou určeny v závislosti na délce běžícího vozidla a následně je stanovena maximální povolená délka běhu. Měření, výsledky a závěry popsané v článku jsou dále přímo realizovány v inovacích odlití ve výrobě.

Files attached