RSD_1 Building control I

Institute of Technology and Business in České Budějovice
winter 2015
Extent and Intensity
2/2. 5 credit(s). Type of Completion: zk (examination).
Teacher(s)
Ing. Jaroslav Mikyška (seminar tutor)
Guaranteed by
doc. Ing. Zuzana Rowland, MBA, PhD.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Study Department – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Timetable of Seminar Groups
RSD_1/CAP_K10: Sat 10. 10. 8:00–9:30 A5, 9:40–11:10 A5, 11:25–12:55 A5, Sat 7. 11. 16:30–18:00 A5, 18:10–19:40 A5, Sun 22. 11. 8:00–9:30 A5, 9:40–11:10 A5, 11:25–12:55 A5, Sun 20. 12. 8:00–9:30 A5, 9:40–11:10 A5, J. Mikyška
Prerequisites (in Czech)
OBOR(CAP)
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives supported by learning outcomes
The aim is to acquire knowledge of the initial stages of the life cycle of construction works, construction project planning, preparation, design, permitting and construction optimization procedure for the authorization of construction. The student after completing the course knows complete an application for planning information, planning the location of the building, a building permit, s/he can provide for himself/herself or a third person authorized building permit according to the Building Act, s/he can check the accuracy of a contract for the manufacture or fabrication of construction project documentation , s/he can optimize the procedure for obtaining the necessary permits under the Building Act.
Syllabus
  • 1. Introduction to management of construction works 2. Construction stages 3. The legislative framework 4. Participants in the construction and their characterization 5. Investing activities 6. Preparation and approval of buildings 7. Designing 8. Engineering activity 9. Selection of contractor 10. Preparing to business relationship from the position of the investor 11. Time - scheduling 12. Contractual relations - contract for work on the building realization 13. Optimization procedure for the authorization of construction
Literature
    required literature
  • TOMÁNKOVÁ,J., ČÁPOVÁ,D., MĚŠŤANOVÁ,D. Příprava a řízení staveb. Praha, ČVUT, 2008, ISBN 978-80-01-04166-6
  • ÚZ č. 953. Stavební zákon a vyhlášky. SAGIT a.s Ostrava. 2013. ISBN 978-80-7208-979-6
  • 3. KONEČNÝ.F., VLK.J. Řízení stavebního díla 1. : Studijní opora pro kombinované studium: 1. vyd. České Budějovice : Vysoká škola technická a ekonomická v Českých Budějovicích, 2012, 86 s. ISBN 978-80-7468-044-1.
  • PROSTĚJOVSKÁ, Z. A KOLEKTIV Management výstavbových projektů. Praha, ČVUT, 2008. ISBN 978-80-01-04142-0
  • MAREČEK a kol., Komentář ke stavebnímu zákonu a předpisy související.ALEŠ ČENĚK s.r.o. Plzeň, 2013. ISBN 978-80-7380-430-5
  • ČÁPOVÁ,D., TOMÁNKOVÁ,J. Příprava a řízení staveb - Sbírka příkladů. Praha, ČVUT, 2009,ISBN 978-80-01-03919-9
Forms of Teaching
Lecture
Seminar
Tutorial
Consultation
Teaching Methods
Frontal Teaching
Individual Work– Individual or Individualized Activity
Teaching Supported by Multimedia Technologies
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial2065
Preparation for the exam2020
working out a paper2525
Attendance on Lectures26 
Attendance on Seminars/Exercises/Tutorial/Excursion2620
Total:130130
Assessment Methods and Assesment Rate
Exam – written 70 %
Seminary Work 30 %
Exam conditions
Grading of the course: Seminar Work: maximum 30% (0-30 points), Final Test: maximum 70% (0-70 points). Successful graduates of the course have to get totally at least 70 points: A 100 – 90, B 89,99 – 84, C 83,99 – 77, D 76,99 – 73, E 72,99 – 70, FX 69,99 – 30, F 29,99 - 0.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is also listed under the following terms Winter 2010, winter 2011, summer 2012, winter 2012, summer 2013, winter 2013, summer 2014, winter 2014, summer 2015.

RSD_1 Building control I

Institute of Technology and Business in České Budějovice
summer 2015
Extent and Intensity
2/2. 5 credit(s). Type of Completion: zk (examination).
Guaranteed by
doc. Ing. Zuzana Rowland, MBA, PhD.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Prerequisites (in Czech)
OBOR(CAP)
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives supported by learning outcomes
The aim is to acquire knowledge of the initial stages of the life cycle of construction works, construction project planning, preparation, design, permitting and construction optimization procedure for the authorization of construction. The student after completing the course knows complete an application for planning information, planning the location of the building, a building permit, s/he can provide for himself/herself or a third person authorized building permit according to the Building Act, s/he can check the accuracy of a contract for the manufacture or fabrication of construction project documentation , s/he can optimize the procedure for obtaining the necessary permits under the Building Act.
Syllabus
  • 1. Introduction to management of construction works 2. Construction stages 3. The legislative framework 4. Participants in the construction and their characterization 5. Investing activities 6. Preparation and approval of buildings 7. Designing 8. Engineering activity 9. Selection of contractor 10. Preparing to business relationship from the position of the investor 11. Time - scheduling 12. Contractual relations - contract for work on the building realization 13. Optimization procedure for the authorization of construction
Literature
    required literature
  • 3. KONEČNÝ.F., VLK.J. Řízení stavebního díla 1. : Studijní opora pro kombinované studium: 1. vyd. České Budějovice : Vysoká škola technická a ekonomická v Českých Budějovicích, 2012, 86 s. ISBN 978-80-7468-044-1.
  • TOMÁNKOVÁ,J., ČÁPOVÁ,D., MĚŠŤANOVÁ,D. Příprava a řízení staveb. Praha, ČVUT, 2008, ISBN 978-80-01-04166-6
  • MAREČEK a kol., Komentář ke stavebnímu zákonu a předpisy související.ALEŠ ČENĚK s.r.o. Plzeň, 2013. ISBN 978-80-7380-430-5
  • ČÁPOVÁ,D., TOMÁNKOVÁ,J. Příprava a řízení staveb - Sbírka příkladů. Praha, ČVUT, 2009,ISBN 978-80-01-03919-9
  • PROSTĚJOVSKÁ, Z. A KOLEKTIV Management výstavbových projektů. Praha, ČVUT, 2008. ISBN 978-80-01-04142-0
  • ÚZ č. 953. Stavební zákon a vyhlášky. SAGIT a.s Ostrava. 2013. ISBN 978-80-7208-979-6
Forms of Teaching
Lecture
Seminar
Tutorial
Consultation
Teaching Methods
Frontal Teaching
Individual Work– Individual or Individualized Activity
Teaching Supported by Multimedia Technologies
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial2065
Preparation for the exam2020
working out a paper2525
Attendance on Lectures26 
Attendance on Seminars/Exercises/Tutorial/Excursion2620
Total:130130
Assessment Methods and Assesment Rate
Exam – written 70 %
Seminary Work 30 %
Exam conditions
Grading of the course: Seminar Work: maximum 30% (0-30 points), Final Test: maximum 70% (0-70 points). Successful graduates of the course have to get totally at least 70 points: A 100 – 90, B 89,99 – 84, C 83,99 – 77, D 76,99 – 73, E 72,99 – 70, FX 69,99 – 30, F 29,99 - 0.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Winter 2010, winter 2011, summer 2012, winter 2012, summer 2013, winter 2013, summer 2014, winter 2014, winter 2015.

RSD_1 Building control I

Institute of Technology and Business in České Budějovice
winter 2014
Extent and Intensity
2/2. 5 credit(s). Type of Completion: zk (examination).
Teacher(s)
Ing. Jaroslav Mikyška (seminar tutor)
Ing. Vladimír Nývlt, MBA, Ph.D. (seminar tutor)
Guaranteed by
Ing. Terezie Vondráčková, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Timetable of Seminar Groups
RSD_1/P01: Tue 16:30–18:00 A7, J. Mikyška
RSD_1/S01: Wed 14:50–16:20 E5, V. Nývlt
Prerequisites (in Czech)
FORMA(P)
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
The capacity limit for the course is 5 student(s).
Current registration and enrolment status: enrolled: 0/5, only registered: 0/5
fields of study / plans the course is directly associated with
Course objectives supported by learning outcomes
The aim is to acquire knowledge of the initial stages of the life cycle of construction works, construction project planning, preparation, design, permitting and construction optimization procedure for the authorization of construction. The student after completing the course knows complete an application for planning information, planning the location of the building, a building permit, s/he can provide for himself/herself or a third person authorized building permit according to the Building Act, s/he can check the accuracy of a contract for the manufacture or fabrication of construction project documentation , s/he can optimize the procedure for obtaining the necessary permits under the Building Act.
Syllabus
  • 1. Introduction to supplier/client relations during construction 2. The legislative framework of construction 3. The legislative framework of construction 4. Environmental protection 5. Quality and safety management 6. Legislative framework of emplace 7. Legislative framework of permitting construction 8. Preparation and design of buildings - authorized persons 9. Investor preparation - selection of the designer 10. Time planning 11. Invoices, controlling 12. Costs and prices calculation of construction work 13. Classification of building and engineering objects
Literature
    required literature
  • 3. KONEČNÝ.F., VLK.J. Řízení stavebního díla 1. : Studijní opora pro kombinované studium: 1. vyd. České Budějovice : Vysoká škola technická a ekonomická v Českých Budějovicích, 2012, 86 s. ISBN 978-80-7468-044-1.
  • TOMÁNKOVÁ,J., ČÁPOVÁ,D., MĚŠŤANOVÁ,D. Příprava a řízení staveb. Praha, ČVUT, 2008, ISBN 978-80-01-04166-6
  • PROSTĚJOVSKÁ, Z. A KOLEKTIV Management výstavbových projektů. Praha, ČVUT, 2008. ISBN 978-80-01-04142-0
  • ÚZ č. 953. Stavební zákon a vyhlášky. SAGIT a.s Ostrava. 2013. ISBN 978-80-7208-979-6
  • MAREČEK a kol., Komentář ke stavebnímu zákonu a předpisy související.ALEŠ ČENĚK s.r.o. Plzeň, 2013. ISBN 978-80-7380-430-5
  • ČÁPOVÁ,D., TOMÁNKOVÁ,J. Příprava a řízení staveb - Sbírka příkladů. Praha, ČVUT, 2009,ISBN 978-80-01-03919-9
Forms of Teaching
Lecture
Seminar
Tutorial
Consultation
Teaching Methods
Frontal Teaching
Individual Work– Individual or Individualized Activity
Teaching Supported by Multimedia Technologies
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial2065
Preparation for the exam2020
working out a paper2525
Attendance on Lectures26 
Attendance on Seminars/Exercises/Tutorial/Excursion2620
Total:130130
Assessment Methods and Assesment Rate
Exam – written 70 %
Seminary Work 30 %
Exam conditions
Grading of the course: Seminar Work: maximum 30% (0-30 points), Final Test: maximum 70% (0-70 points). Successful graduates of the course have to get totally at least 70 points: A 100 – 90, B 89,99 – 84, C 83,99 – 77, D 76,99 – 73, E 72,99 – 70, FX 69,99 – 30, F 29,99 - 0.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is also listed under the following terms Winter 2010, winter 2011, summer 2012, winter 2012, summer 2013, winter 2013, summer 2014, summer 2015, winter 2015.

RSD_1 Building control I

Institute of Technology and Business in České Budějovice
summer 2014
Extent and Intensity
2/2. 5 credit(s). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Jan Váchal, CSc. (lecturer)
Ing. Jaroslav Mikyška (seminar tutor)
Ing. Terezie Vondráčková, Ph.D. (seminar tutor)
Guaranteed by
Ing. Terezie Vondráčková, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Timetable of Seminar Groups
RSD_1/CAP: Sun 6. 4. 15:30–17:00 A2, J. Mikyška, výuka ve zkráceném kurzu v rámci CŽV
Prerequisites (in Czech)
OBOR(CAP)
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives supported by learning outcomes
The aim is to acquire knowledge of the initial stages of the life cycle of construction works, construction project planning, preparation, design, permitting and construction optimization procedure for the authorization of construction. The student after completing the course knows complete an application for planning information, planning the location of the building, a building permit, s/he can provide for himself/herself or a third person authorized building permit according to the Building Act, s/he can check the accuracy of a contract for the manufacture or fabrication of construction project documentation , s/he can optimize the procedure for obtaining the necessary permits under the Building Act.
Syllabus
  • 1. Introduction to management of construction works 2. Construction stages 3. The legislative framework 4. Participants in the construction and their characterization 5. Investing activities 6. Preparation and approval of buildings 7. Designing 8. Engineering activity 9. Selection of contractor 10. Preparing to business relationship from the position of the investor 11. Time - scheduling 12. Contractual relations - contract for work on the building realization 13. Optimization procedure for the authorization of construction
Literature
    required literature
  • MAREČEK a kol., Komentář ke stavebnímu zákonu a předpisy související.ALEŠ ČENĚK s.r.o. Plzeň, 2013. ISBN 978-80-7380-430-5
  • ÚZ č. 953. Stavební zákon a vyhlášky. SAGIT a.s Ostrava. 2013. ISBN 978-80-7208-979-6
  • ČÁPOVÁ,D., TOMÁNKOVÁ,J. Příprava a řízení staveb - Sbírka příkladů. Praha, ČVUT, 2009,ISBN 978-80-01-03919-9
  • 3. KONEČNÝ.F., VLK.J. Řízení stavebního díla 1. : Studijní opora pro kombinované studium: 1. vyd. České Budějovice : Vysoká škola technická a ekonomická v Českých Budějovicích, 2012, 86 s. ISBN 978-80-7468-044-1.
  • TOMÁNKOVÁ,J., ČÁPOVÁ,D., MĚŠŤANOVÁ,D. Příprava a řízení staveb. Praha, ČVUT, 2008, ISBN 978-80-01-04166-6
  • PROSTĚJOVSKÁ, Z. A KOLEKTIV Management výstavbových projektů. Praha, ČVUT, 2008. ISBN 978-80-01-04142-0
    recommended literature
  • Legislativa České republiky v platném znění
Forms of Teaching
Lecture
Seminar
Tutorial
Consultation
Teaching Methods
Frontal Teaching
Individual Work– Individual or Individualized Activity
Teaching Supported by Multimedia Technologies
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial2065
Preparation for the exam2020
working out a paper2525
Attendance on Lectures26 
Attendance on Seminars/Exercises/Tutorial/Excursion2620
Total:130130
Assessment Methods and Assesment Rate
Exam – written 70 %
Seminary Work 30 %
Exam conditions
Grading of the course: Seminar Work: maximum 30% (0-30 points), Final Test: maximum 70% (0-70 points). Successful graduates of the course have to get totally at least 70 points: A 100 – 90, B 89,99 – 84, C 83,99 – 77, D 76,99 – 73, E 72,99 – 70, FX 69,99 – 30, F 29,99 - 0.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is also listed under the following terms Winter 2010, winter 2011, summer 2012, winter 2012, summer 2013, winter 2013, winter 2014, summer 2015, winter 2015.

RSD_1 Building control I

Institute of Technology and Business in České Budějovice
winter 2013
Extent and Intensity
2/2. 5 credit(s). Type of Completion: zk (examination).
Teacher(s)
Ing. František Konečný, Ph.D. (lecturer)
Ing. František Konečný, Ph.D. (seminar tutor)
prof. Ing. Jan Váchal, CSc. (seminar tutor)
Ing. Terezie Vondráčková, Ph.D. (seminar tutor)
Guaranteed by
Ing. František Konečný, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Timetable of Seminar Groups
RSD_1/K8: Sat 19. 10. 13:40–15:10 B2, 15:15–16:45 B2, Sun 3. 11. 13:40–15:10 B2, 15:15–16:45 B2, 16:50–18:20 B2, Sun 24. 11. 8:00–9:30 B2, 9:40–11:10 B2, 12:00–13:30 B2, Sat 14. 12. 16:50–18:20 B2, 18:25–19:55 B2, F. Konečný
RSD_1/P01: Thu 11:35–13:05 B3, F. Konečný
RSD_1/S01: Thu 13:10–14:40 B3, F. Konečný
RSD_1/S02: Thu 14:45–16:15 B3, F. Konečný
RSD_1/S03: Thu 16:20–17:50 B3, F. Konečný
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives supported by learning outcomes
The aim is to acquire knowledge of the initial stages of the life cycle of construction works, construction project planning, preparation, design, permitting and construction optimization procedure for the authorization of construction. The student after completing the course knows complete an application for planning information, planning the location of the building, a building permit, s/he can provide for himself/herself or a third person authorized building permit according to the Building Act, s/he can check the accuracy of a contract for the manufacture or fabrication of construction project documentation , s/he can optimize the procedure for obtaining the necessary permits under the Building Act.
Syllabus
  • 1. Introduction to management of construction works 2. Construction stages 3. The legislative framework 4. Participants in the construction and their characterization 5. Investing activities 6. Preparation and approval of buildings 7. Designing 8. Engineering activity 9. Selection of contractor 10. Preparing to business relationship from the position of the investor 11. Time - scheduling 12. Contractual relations - contract for work on the building realization 13. Optimization procedure for the authorization of construction
Literature
    required literature
  • ČÁPOVÁ,D., TOMÁNKOVÁ,J. Příprava a řízení staveb - Sbírka příkladů. Praha, ČVUT, 2009,ISBN 978-80-01-03919-9
  • TOMÁNKOVÁ,J., ČÁPOVÁ,D., MĚŠŤANOVÁ,D. Příprava a řízení staveb. Praha, ČVUT, 2008, ISBN 978-80-01-04166-6
  • ÚZ č. 953. Stavební zákon a vyhlášky. SAGIT a.s Ostrava. 2013. ISBN 978-80-7208-979-6
  • PROSTĚJOVSKÁ, Z. A KOLEKTIV Management výstavbových projektů. Praha, ČVUT, 2008. ISBN 978-80-01-04142-0
  • 3. KONEČNÝ.F., VLK.J. Řízení stavebního díla 1. : Studijní opora pro kombinované studium: 1. vyd. České Budějovice : Vysoká škola technická a ekonomická v Českých Budějovicích, 2012, 86 s. ISBN 978-80-7468-044-1.
  • MAREČEK a kol., Komentář ke stavebnímu zákonu a předpisy související.ALEŠ ČENĚK s.r.o. Plzeň, 2013. ISBN 978-80-7380-430-5
    recommended literature
  • Legislativa České republiky v platném znění
  • HAČKAJLOVÁ, L. Ekonomika a management 13. Praha, ČVUT, 2004. ISBN 80-01-03060-1
  • PROSTĚJOVSKÁ, Z. Investování pro stavaře. Praha, Professional Publishing, 2007. ISBN 978-80-86946-35-1
Forms of Teaching
Lecture
Seminar
Tutorial
Consultation
Teaching Methods
Frontal Teaching
Individual Work– Individual or Individualized Activity
Teaching Supported by Multimedia Technologies
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial2065
Preparation for the exam2020
working out a paper2525
Attendance on Lectures26 
Attendance on Seminars/Exercises/Tutorial/Excursion2620
Total:130130
Assessment Methods and Assesment Rate
Exam – written 70 %
Seminary Work 30 %
Exam conditions
For successful completion of the course is to be achieved from ~ written test at least 70 points, it is 70%. It is necessary to write the final exam at least 70% of the 70 points. Up to 30 points can be obtained for the processing and timely essay submission. The maximum score on both parts is 100 For successful completion of the course must be a minimum of 70 points, or 70%. Grading scale for the final exam - completed 70 to 49 points, and failed can be repeated 48 to 21 points, has not and can not repeat 20-0 points.

Overall classification:

A - 98-100 pts

B - 91-97 points

C - 80-90 points

D - 73-79 points

E - 70-72 points

FX -69-30 points

F - 0-29 points (ie below 30%)

Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is also listed under the following terms Winter 2010, winter 2011, summer 2012, winter 2012, summer 2013, summer 2014, winter 2014, summer 2015, winter 2015.

RSD_1 Building control I

Institute of Technology and Business in České Budějovice
summer 2013
Extent and Intensity
2/2. 5 credit(s). Type of Completion: zk (examination).
Teacher(s)
Ing. František Konečný, Ph.D. (lecturer)
Ing. František Konečný, Ph.D. (seminar tutor)
Guaranteed by
Ing. František Konečný, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Timetable of Seminar Groups
RSD_1/K7: Sun 10. 3. 13:40–15:10 A5, 15:15–16:45 A5, Sun 14. 4. 12:00–13:30 A5, 13:40–15:10 A5, Sat 27. 4. 8:00–9:30 A5, 9:40–11:10 A5, 12:00–13:30 A5, Sat 25. 5. 15:15–16:45 A5, 16:50–18:20 A5, 18:25–19:55 A5, F. Konečný
Prerequisites (in Czech)
FORMA(K)
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives supported by learning outcomes
The aim is to acquire knowledge of the initial stages of the life cycle of construction works, construction project planning, preparation, design, permitting and construction optimization procedure for the authorization of construction. The student after completing the course knows complete an application for planning information, planning the location of the building, a building permit, s/he can provide for himself/herself or a third person authorized building permit according to the Building Act, s/he can check the accuracy of a contract for the manufacture or fabrication of construction project documentation , s/he can optimize the procedure for obtaining the necessary permits under the Building Act.
Syllabus
  • 1. Introduction to management of construction works 2. Construction stages 3. The legislative framework 4. Participants in the construction and their characterization 5. Investing activities 6. Preparation and approval of buildings 7. Designing 8. Engineering activity 9. Selection of contractor 10. Preparing to business relationship from the position of the investor 11. Time - scheduling 12. Contractual relations - contract for work on the building realization 13. Optimization procedure for the authorization of construction
Literature
    required literature
  • KONEČNÝ, František. Řízení stavebního díla I.: studijní opora pro kombinované studium. 1. vyd. České Budějovice: Vysoká škola technická a ekonomická v Českých Budějovicích, 2012.. ISBN 978-80-7468-044-1
  • TOMÁNKOVÁ,J., ČÁPOVÁ,D., MĚŠŤANOVÁ,D. Příprava a řízení staveb. Praha, ČVUT, 2008, ISBN 978-80-01-04166-6
  • Vyhláška č. 499/2006 Sb.- O dokumentaci staveb, v platném znění
  • ČESKO. Zákon č. 183 ze dne 14. března 2006 o územním plánování a stavebním řádu v plat-ném znění (stavební zákon). In Sbírka zákonů České republiky. 2006, částka 63, s. 2226–2288. ISSN 1211-1244.
    recommended literature
  • PROSTĚJOVSKÁ, Z. A KOLEKTIV Management výstavbových projektů. Praha, ČVUT, 2008. ISBN 978-80-01-04142-0
  • Legislativa České republiky v platném znění
  • PROSTĚJOVSKÁ, Z. Investování pro stavaře. Praha, Professional Publishing, 2007. ISBN 978-80-86946-35-1
  • ČÁPOVÁ,D., TOMÁNKOVÁ,J. Příprava a řízení staveb - Sbírka příkladů. Praha, ČVUT, 2009,ISBN 978-80-01-03919-9
  • HAČKAJLOVÁ, L. Ekonomika a management 13. Praha, ČVUT, 2004. ISBN 80-01-03060-1
Forms of Teaching
Lecture
Seminar
Tutorial
Consultation
Teaching Methods
Frontal Teaching
Individual Work– Individual or Individualized Activity
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial2065
Preparation for the exam2020
working out a paper2525
Attendance on Lectures26 
Attendance on Seminars/Exercises/Tutorial/Excursion2620
Total:130130
Assessment Methods and Assesment Rate
Exam – written 90 %
Seminary Work 10 %
Exam conditions
Till the beginning of the exam period the student must submit a complete paper. For the successful completing of the exam the student must prove min. 80% of required knowledge
Language of instruction
Czech
Further Comments
The course is taught annually.
The course is also listed under the following terms Winter 2010, winter 2011, summer 2012, winter 2012, winter 2013, summer 2014, winter 2014, summer 2015, winter 2015.

RSD_1 Building control I

Institute of Technology and Business in České Budějovice
winter 2012
Extent and Intensity
2/2. 5 credit(s). Type of Completion: zk (examination).
Teacher(s)
Ing. František Konečný, Ph.D. (seminar tutor)
Guaranteed by
Ing. František Konečný, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Timetable of Seminar Groups
RSD_1/P01: Tue 17:55–19:25 B1, F. Konečný
RSD_1/S01: Thu 13:10–14:40 B3, F. Konečný
RSD_1/S02: Fri 8:15–9:45 D415, F. Konečný
Prerequisites (in Czech)
FORMA(P)
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives supported by learning outcomes
The aim is to acquire knowledge of the initial stages of the life cycle of construction works, construction project planning, preparation, design, permitting and construction optimization procedure for the authorization of construction. The student after completing the course knows complete an application for planning information, planning the location of the building, a building permit, s/he can provide for himself/herself or a third person authorized building permit according to the Building Act, s/he can check the accuracy of a contract for the manufacture or fabrication of construction project documentation , s/he can optimize the procedure for obtaining the necessary permits under the Building Act.
Syllabus
  • 1. Introduction to management of construction works 2. Construction stages 3. The legislative framework 4. Participants in the construction and their characterization 5. Investing activities 6. Preparation and approval of buildings 7. Designing 8. Engineering activity 9. Selection of contractor 10. Preparing to business relationship from the position of the investor 11. Time - scheduling 12. Contractual relations - contract for work on the building realization 13. Optimization procedure for the authorization of construction
Literature
    required literature
  • TOMÁNKOVÁ,J., ČÁPOVÁ,D., MĚŠŤANOVÁ,D. Příprava a řízení staveb. Praha, ČVUT, 2008, ISBN 978-80-01-04166-6
  • ČÁPOVÁ,D., TOMÁNKOVÁ,J. Příprava a řízení staveb - Sbírka příkladů. Praha, ČVUT, 2009,ISBN 978-80-01-03919-9
  • PROSTĚJOVSKÁ, Z. A KOLEKTIV Management výstavbových projektů. Praha, ČVUT, 2008. ISBN 978-80-01-04142-0
  • PROSTĚJOVSKÁ, Z. Investování pro stavaře. Praha, Professional Publishing, 2007. ISBN 978-80-86946-35-1
    recommended literature
  • Legislativa České republiky v platném znění
  • OLERÍNY, M. Řízení stavebních projektů – claimový management. Praha, BECK, 2004. ISBN 80-7179-888-6
  • OLERÍNY, M. Řízení stavebních projektů – Ceny a smlouvy v zahraniční praxi. Praha, BECK, 2002. ISBN 80-7179-665-4
  • HAČKAJLOVÁ, L. Ekonomika a management 13. Praha, ČVUT, 2004. ISBN 80-01-03060-1
Forms of Teaching
Lecture
Seminar
Tutorial
Consultation
Teaching Methods
Frontal Teaching
Individual Work– Individual or Individualized Activity
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial2065
Preparation for the exam2020
working out a paper2525
Attendance on Lectures26 
Attendance on Seminars/Exercises/Tutorial/Excursion2620
Total:130130
Assessment Methods and Assesment Rate
Exam – written 90 %
Seminary Work 10 %
Exam conditions
Till the beginning of the exam period the student must submit a complete paper. For the successful completing of the exam the student must prove min. 80% of required knowledge
Language of instruction
Czech
Further Comments
The course is taught annually.
The course is also listed under the following terms Winter 2010, winter 2011, summer 2012, summer 2013, winter 2013, summer 2014, winter 2014, summer 2015, winter 2015.

RSD_1 Building control I

Institute of Technology and Business in České Budějovice
summer 2012
Extent and Intensity
2/2. 5 credit(s). Type of Completion: zk (examination).
Teacher(s)
Ing. František Konečný, Ph.D. (lecturer)
Ing. Marcela Frajová (seminar tutor)
Ing. František Konečný, Ph.D. (seminar tutor)
Guaranteed by
Ing. František Konečný, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Timetable of Seminar Groups
RSD_1/ccv: Wed 25. 4. 10:30–12:00 D213, Tue 15. 5. 12:30–14:00 D213, Tue 5. 6. 12:00–14:15 D213, F. Konečný
Prerequisites (in Czech)
OBOR(CAP)
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives supported by learning outcomes
The aim is to acquire knowledge of the initial stages of the life cycle of construction works, construction project planning, preparation, design, permitting and construction optimization procedure for the authorization of construction. The student after completing the course knows complete an application for planning information, planning the location of the building, a building permit, s/he can provide for himself/herself or a third person authorized building permit according to the Building Act, s/he can check the accuracy of a contract for the manufacture or fabrication of construction project documentation , s/he can optimize the procedure for obtaining the necessary permits under the Building Act.
Syllabus
  • 1. Introduction to management of construction works 2. Construction stages 3. The legislative framework 4. Participants in the construction and their characterization 5. Investing activities 6. Preparation and approval of buildings 7. Designing 8. Engineering activity 9. Selection of contractor 10. Preparing to business relationship from the position of the investor 11. Time - scheduling 12. Contractual relations - contract for work on the building realization 13. Optimization procedure for the authorization of construction
Literature
    required literature
  • TOMÁNKOVÁ,J., ČÁPOVÁ,D., MĚŠŤANOVÁ,D. Příprava a řízení staveb. Praha, ČVUT, 2008, ISBN 978-80-01-04166-6
  • ČÁPOVÁ,D., TOMÁNKOVÁ,J. Příprava a řízení staveb - Sbírka příkladů. Praha, ČVUT, 2009,ISBN 978-80-01-03919-9
  • PROSTĚJOVSKÁ, Z. A KOLEKTIV Management výstavbových projektů. Praha, ČVUT, 2008. ISBN 978-80-01-04142-0
  • PROSTĚJOVSKÁ, Z. Investování pro stavaře. Praha, Professional Publishing, 2007. ISBN 978-80-86946-35-1
    recommended literature
  • Legislativa České republiky v platném znění
  • OLERÍNY, M. Řízení stavebních projektů – Ceny a smlouvy v zahraniční praxi. Praha, BECK, 2002. ISBN 80-7179-665-4
  • OLERÍNY, M. Řízení stavebních projektů – claimový management. Praha, BECK, 2004. ISBN 80-7179-888-6
  • HAČKAJLOVÁ, L. Ekonomika a management 13. Praha, ČVUT, 2004. ISBN 80-01-03060-1
Forms of Teaching
Lecture
Seminar
Tutorial
Consultation
Teaching Methods
Frontal Teaching
Individual Work– Individual or Individualized Activity
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial2065
Preparation for the exam2020
working out a paper2525
Attendance on Lectures26 
Attendance on Seminars/Exercises/Tutorial/Excursion2620
Total:130130
Assessment Methods and Assesment Rate
Exam – written 90 %
Seminary Work 10 %
Exam conditions
Till the beginning of the exam period the student must submit a complete paper. For the successful completing of the exam the student must prove min. 80% of required knowledge
Language of instruction
Czech
Further Comments
The course is taught annually.
The course is also listed under the following terms Winter 2010, winter 2011, winter 2012, summer 2013, winter 2013, summer 2014, winter 2014, summer 2015, winter 2015.

RSD_1 Building control I

Institute of Technology and Business in České Budějovice
winter 2011
Extent and Intensity
2/2. 5 credit(s). Type of Completion: zk (examination).
Teacher(s)
Ing. Marcela Frajová (seminar tutor)
Ing. František Konečný, Ph.D. (seminar tutor)
Guaranteed by
Ing. František Konečný, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Timetable of Seminar Groups
RSD_1/P01: Tue 11:35–13:05 B2, F. Konečný
RSD_1/S01: Thu 9:55–11:25 B4, M. Frajová
RSD_1/S02: Wed 8:15–9:45 A3, M. Frajová
RSD_1/S03: Thu 14:45–16:15 D416, M. Frajová
Prerequisites (in Czech)
FORMA(P)
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives supported by learning outcomes
A student masters the skills of the initial phase of the life cycle of constructions, building sight planning, disposition, projection, construction permit and progress optimalization at the construction permit.
Syllabus
  • 1. Introduction to the problems of construction control 2. Construction phase 3. Legislative frame 4. Construction participants and their characteristic 5. Investor activity 6. Preparation and construction permit 7. Building projection 8. Engineering activity 9. Selection of the building contractor 10. Preparing for the business relation conclusion from the position of investor 11. Time scheduling 12. Contract relations - construction contract for work 13. Progress optimalization at the construction permit.
Literature
    required literature
  • TOMÁNKOVÁ,J., ČÁPOVÁ,D., MĚŠŤANOVÁ,D. Příprava a řízení staveb. Praha, ČVUT, 2008, ISBN 978-80-01-04166-6
  • ČÁPOVÁ,D., TOMÁNKOVÁ,J. Příprava a řízení staveb - Sbírka příkladů. Praha, ČVUT, 2009,ISBN 978-80-01-03919-9
  • PROSTĚJOVSKÁ, Z. A KOLEKTIV Management výstavbových projektů. Praha, ČVUT, 2008. ISBN 978-80-01-04142-0
  • PROSTĚJOVSKÁ, Z. Investování pro stavaře. Praha, Professional Publishing, 2007. ISBN 978-80-86946-35-1
    recommended literature
  • OLERÍNY, M. Řízení stavebních projektů – claimový management. Praha, BECK, 2004. ISBN 80-7179-888-6
  • OLERÍNY, M. Řízení stavebních projektů – Ceny a smlouvy v zahraniční praxi. Praha, BECK, 2002. ISBN 80-7179-665-4
  • HAČKAJLOVÁ, L. Ekonomika a management 13. Praha, ČVUT, 2004. ISBN 80-01-03060-1
  • Legislativa České republiky v platném znění
Forms of Teaching
Lecture
Seminar
Tutorial
Consultation
Teaching Methods
Frontal Teaching
Individual Work– Individual or Individualized Activity
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial2065
Preparation for the exam2020
working out a paper2525
Attendance on Lectures26 
Attendance on Seminars/Exercises/Tutorial/Excursion2620
Total:130130
Assessment Methods and Assesment Rate
Exam – written 90 %
Seminary Work 10 %
Exam conditions
Till the beginning of the exam period the student must submit a complete paper. For the successful completing of the exam the student must prove min. 80% of required knowledge
Language of instruction
Czech
Further Comments
The course is taught annually.
The course is also listed under the following terms Winter 2010, summer 2012, winter 2012, summer 2013, winter 2013, summer 2014, winter 2014, summer 2015, winter 2015.

RSD_1 Building control I

Institute of Technology and Business in České Budějovice
Winter 2010
Extent and Intensity
2/2. 5 credit(s). Type of Completion: zk (examination).
Teacher(s)
Ing. František Konečný, Ph.D. (lecturer)
Guaranteed by
Ing. František Konečný, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Timetable of Seminar Groups
RSD_1/01: Thu 8:30–10:00 A1, F. Konečný
RSD_1/02: Thu 10:10–11:40 A6, F. Konečný
RSD_1/03: Thu 12:00–13:30 A6, F. Konečný
RSD_1/04: Thu 13:35–15:05 A6, F. Konečný
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives supported by learning outcomes
A student masters the skills of the initial phase of the life cycle of constructions, building sight planning, disposition, projection, construction permit and progress optimalization at the construction permit.
Syllabus
  • 1. Introduction to the problems of construction control 2. Construction phase 3. Legislative frame 4. Construction participants and their characteristic 5. Investor activity 6. Preparation and construction permit 7. Building projection 8. Engineering activity 9. Selection of the building contractor 10. Preparing for the business relation conclusion from the position of investor 11. Time scheduling 12. Contract relations - construction contract for work 13. Progress optimalization at the construction permit.
Literature
    required literature
  • TOMÁNKOVÁ,J., ČÁPOVÁ,D., MĚŠŤANOVÁ,D. Příprava a řízení staveb. Praha, ČVUT, 2008, ISBN 978-80-01-04166-6
  • ČÁPOVÁ,D., TOMÁNKOVÁ,J. Příprava a řízení staveb - Sbírka příkladů. Praha, ČVUT, 2009,ISBN 978-80-01-03919-9
  • PROSTĚJOVSKÁ, Z. A KOLEKTIV Management výstavbových projektů. Praha, ČVUT, 2008. ISBN 978-80-01-04142-0
  • PROSTĚJOVSKÁ, Z. Investování pro stavaře. Praha, Professional Publishing, 2007. ISBN 978-80-86946-35-1
    recommended literature
  • Legislativa České republiky v platném znění
  • OLERÍNY, M. Řízení stavebních projektů – Ceny a smlouvy v zahraniční praxi. Praha, BECK, 2002. ISBN 80-7179-665-4
  • OLERÍNY, M. Řízení stavebních projektů – claimový management. Praha, BECK, 2004. ISBN 80-7179-888-6
  • HAČKAJLOVÁ, L. Ekonomika a management 13. Praha, ČVUT, 2004. ISBN 80-01-03060-1
Forms of Teaching
Lecture
Seminar
Tutorial
Consultation
Teaching Methods
Frontal Teaching
Individual Work– Individual or Individualized Activity
Student Workload
ActivitiesNumber of Hours of Study Workload
Daily StudyCombined Study
Preparation for Lectures13 
Preparation for Seminars, Exercises, Tutorial2065
Preparation for the exam2020
working out a paper2525
Attendance on Lectures26 
Attendance on Seminars/Exercises/Tutorial/Excursion2620
Total:130130
Assessment Methods and Assesment Rate
Exam – written 90 %
Seminary Work 10 %
Exam conditions
Till the beginning of the exam period the student must submit a complete paper. For the successful completing of the exam the student must prove min. 80% of required knowledge
Language of instruction
Czech
Further Comments
The course is taught annually.
The course is also listed under the following terms winter 2011, summer 2012, winter 2012, summer 2013, winter 2013, summer 2014, winter 2014, summer 2015, winter 2015.
  • Enrolment Statistics (recent)