Course Information

CAD_4 CAD Systems IV

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Guaranteed by

Ing. Jaroslav Staněk, DiS.
Study Department – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Prerequisites

OBOR(CAP)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

Learning outcomes of the course unit The aim of the course is to extend the knowledge of Grafisoft ArchiCAD 3D graphics system and to deepen user skills with this program. Upon successful completion of the course, the student can control some program extensions as well as the setting of materials and element properties.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, Repetition of CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, Skeleton, Terrain - geodetic coordinates
• 4. Creating a video of the flight
• 5. Lighting / Lamp Function, Sunlight Study, Energy Rating
• 6. Grafisoft ArchiCAD MEP
• 7. Grafisoft ArchiCAD MEP
• 8. Grafisoft ArchiCAD add-ons and applications
• 9. Grafisoft ArchiCAD add-ons and applications
• 10. Grafisoft ArchiCAD add-ons and applications
• 11. Grafisoft ArchiCAD add-ons and applications
• 12. Independent work
• 13. Independent work and submission of the project

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• https://campus.allplan.com
• www.allplan.com/services/cad

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 30 %
Project – semestral 70 %

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.
The course is taught: every week.

CAD_4 CAD Systems IV

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Aleš Kaňkovský (seminar tutor)

Guaranteed by

Ing. Vladimír Nývlt, MBA, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/S01: Tue 8:00–9:30 D215, A. Kaňkovský

Prerequisites

FORMA(P)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

Learning outcomes of the course unit The aim of the course is to extend the knowledge of Grafisoft ArchiCAD 3D graphics system and to deepen user skills with this program. Upon successful completion of the course, the student can control some program extensions as well as the setting of materials and element properties.

Learning outcomes

The student has an extended knowledge of Grafisoft ArchiCAD 3D graphic system and deepened user skills with this program. Student controls some program extensions as well as setting materials and element properties.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, Repetition of CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, Skeleton, Terrain - geodetic coordinates
• 4. Creating a video of the flight
• 5. Lighting / Lamp Function, Sunlight Study, Energy Rating
• 6. Grafisoft ArchiCAD MEP
• 7. Grafisoft ArchiCAD MEP
• 8. Grafisoft ArchiCAD add-ons and applications
• 9. Grafisoft ArchiCAD add-ons and applications
• 10. Grafisoft ArchiCAD add-ons and applications
• 11. Grafisoft ArchiCAD add-ons and applications
• 12. Independent work
• 13. Independent work and submission of the project

Literature

recommended literature
• https://campus.allplan.com
• www.allplan.com/services/cad
• Nápověda obsažená v programu

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial		16
Semester project	26	26
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Project – semestral 100 %

Exam conditions

It is the elaboration of the specified building drawing. The scope of work and the correct use of the program tools are evaluated. The score corresponds to the percentage of the evaluation methods. Semestral project max. 100 points. To pass the course successfully, it is necessary to get a min. 70 points.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.

Teacher's information

Attendance in lessons is defined in a separate internal standard of ITB (Evidence of attendance of students at ITB). It is compulsory, except of the lectures, for full-time students to attend 70 % lesson of the subjet in a semeste

CAD_4 CAD Systems IV

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jiří Šál, Ph.D. (seminar tutor)

Guaranteed by

Ing. Vladimír Nývlt, MBA, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/S01: Thu 8:00–9:30 D315, J. Šál

Prerequisites

FORMA(P)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

Learning outcomes of the course unit The aim of the course is to extend the knowledge of Grafisoft ArchiCAD 3D graphics system and to deepen user skills with this program. Upon successful completion of the course, the student can control some program extensions as well as the setting of materials and element properties.

Learning outcomes

The student has an extended knowledge of Grafisoft ArchiCAD 3D graphic system and deepened user skills with this program. Student controls some program extensions as well as setting materials and element properties.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, Repetition of CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, Skeleton, Terrain - geodetic coordinates
• 4. Creating a video of the flight
• 5. Lighting / Lamp Function, Sunlight Study, Energy Rating
• 6. Grafisoft ArchiCAD MEP
• 7. Grafisoft ArchiCAD MEP
• 8. Grafisoft ArchiCAD add-ons and applications
• 9. Grafisoft ArchiCAD add-ons and applications
• 10. Grafisoft ArchiCAD add-ons and applications
• 11. Grafisoft ArchiCAD add-ons and applications
• 12. Independent work
• 13. Independent work and submission of the project

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• www.allplan.com/services/cad
• https://campus.allplan.com

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 30 %
Project – semestral 70 %

Exam conditions

It is the elaboration of the specified building drawing. The scope of work and the correct use of the program tools are evaluated. The score corresponds to the percentage of the evaluation methods. Semestral project max. 70 points, test max.30 points. To pass the course successfully, it is necessary to get a min. 70 points.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.

Teacher's information

Attendance in lessons is defined in a separate internal standard of ITB (Evidence of attendance of students at ITB). It is compulsory, except of the lectures, for full-time students to attend 70 % lesson of the subjet in a semeste

CAD_4 CAD Systems IV

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jiří Šál, Ph.D. (seminar tutor)

Guaranteed by

Ing. Vladimír Nývlt, MBA, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/S01: each odd Monday 13:05–14:35 D215, each odd Monday 14:50–16:20 D215, J. Šál

Prerequisites

FORMA(P)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

Learning outcomes of the course unit The aim of the course is to extend the knowledge of Grafisoft ArchiCAD 3D graphics system and to deepen user skills with this program. Upon successful completion of the course, the student can control some program extensions as well as the setting of materials and element properties.

Learning outcomes

The student has an extended knowledge of Grafisoft ArchiCAD 3D graphic system and deepened user skills with this program. Student controls some program extensions as well as setting materials and element properties.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, Repetition of CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, Skeleton, Terrain - geodetic coordinates
• 4. Creating a video of the flight
• 5. Lighting / Lamp Function, Sunlight Study, Energy Rating
• 6. Grafisoft ArchiCAD MEP
• 7. Grafisoft ArchiCAD MEP
• 8. Grafisoft ArchiCAD add-ons and applications
• 9. Grafisoft ArchiCAD add-ons and applications
• 10. Grafisoft ArchiCAD add-ons and applications
• 11. Grafisoft ArchiCAD add-ons and applications
• 12. Independent work
• 13. Independent work and submission of the project

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• www.allplan.com/services/cad
• https://campus.allplan.com

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 30 %
Project – semestral 70 %

Exam conditions

It is the elaboration of the specified building drawing. The scope of work and the correct use of the program tools are evaluated. The score corresponds to the percentage of the evaluation methods. Semestral project max. 70 points, test max.30 points. To pass the course successfully, it is necessary to get a min. 70 points.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.

CAD_4 CAD Systems IV

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jiří Šál, Ph.D. (seminar tutor)

Guaranteed by

Ing. Jiří Šál, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/S01: Mon 13:05–14:35 D215, J. Šál
CAD_4/TS01: each even Friday 11:25–12:55 D304, each even Friday 13:05–14:35 D304, J. Šál

Prerequisites

FORMA(P)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.
The capacity limit for the course is 84 student(s).
Current registration and enrolment status: enrolled: 0/84, only registered: 0/84

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

Learning outcomes of the course unit The aim of the course is to extend the knowledge of Grafisoft ArchiCAD 3D graphics system and to deepen user skills with this program. Upon successful completion of the course, the student can control some program extensions as well as the setting of materials and element properties.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, Repetition of CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, Skeleton, Terrain - geodetic coordinates
• 4. Creating a video of the flight
• 5. Lighting / Lamp Function, Sunlight Study, Energy Rating
• 6. Grafisoft ArchiCAD MEP
• 7. Grafisoft ArchiCAD MEP
• 8. Grafisoft ArchiCAD add-ons and applications
• 9. Grafisoft ArchiCAD add-ons and applications
• 10. Grafisoft ArchiCAD add-ons and applications
• 11. Grafisoft ArchiCAD add-ons and applications
• 12. Independent work
• 13. Independent work and submission of the project

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• https://campus.allplan.com
• www.allplan.com/services/cad

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 30 %
Project – semestral 70 %

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.

CAD_4 CAD Systems IV

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jiří Šál, Ph.D. (seminar tutor)

Guaranteed by

Ing. Jiří Šál, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/S01: Tue 16:30–18:00 D315, J. Šál
CAD_4/S02: Tue 18:10–19:40 D315, J. Šál

Prerequisites

FORMA(P)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.
The capacity limit for the course is 56 student(s).
Current registration and enrolment status: enrolled: 0/56, only registered: 0/56

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim is to broaden the knowledge of 3D graphics system Grafisoft ArchiCAD and enhance user skills with this program. After successful completion of the course, the student has some expansion program, the setting properties of materials and components.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, revision of curriculum CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, skeleton, Terrain - geodetic coordinates
• 4. Creating Video flybys
• 5. Illumination / functions Lamp, Solar Studies, Energy rating
• 6. Grafisoft ArchiCAD extensions and modules
• 7. Grafisoft ArchiCAD extensions and modules
• 8. Grafisoft ArchiCAD extensions and modules
• 9. Grafisoft ArchiCAD extensions and modules
• 10. Grafisoft ArchiCAD extensions and modules
• 11. Grafisoft ArchiCAD extensions and modules
• 12. Grafisoft ArchiCAD extensions and modules
• 13. Individual work and project delivery

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• ARCHICAD - KROK ZA KROKEM, I. DÍL - STUDIE
• ARCHICAD - KROK ZA KROKEM, II. DÍL - DOKUMENTACE
• ArchiCAD for AutoCAD users

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Project – semestral 70 %
interim evaluation 30 %

Exam conditions

This is an elaboration of the construction drawing. The scope of work and proper use of software tools is assessed. Score corresponds to the procentage ratio of these evaluation methods. Term project can reach the maximum of 70 points, interim evaluation maximum of 20 points. The student needs at least 70 points to pass the course.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.

CAD_4 CAD Systems IV

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jiří Kotrba (seminar tutor)
Ing. Jaromír Rais (seminar tutor)

Guaranteed by

doc. Ing. Zuzana Rowland, MBA, PhD.
Study Department – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Study Department – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/CAP_prez: Mon 18. 4. 16:30–18:00 D215, Mon 25. 4. 16:30–18:00 D215, Mon 2. 5. 16:30–18:00 D215, J. Kotrba, J. Rais

Prerequisites

OBOR(CAP)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is to introduce the students with other CAD system - Allplan. After the successful completion of the course, the student masters the basic procedures and the most important functions of this graphical program.

Syllabus

• 1.Allplan system - basic philosophy of the system, settings and basic drawing elements
• 2.Entering points, grips, auxiliary structures, area selection, etc.
• 3.Levels, foils, hatches, patterns, dimensions
• ­4.Complex example in 2D
• ­5.Introduction into 3D architecture, 3D motion in window, walls and height settings
• ­6.Window and door openings
• 7.Modeller - columns, slabs and holes in the board
• ­8.Stairs and roofs
• 9.Motion in 3D windows (motion, axonometric, perspective, hidden lines)
• ­10.Creation of 2D drawings from 3D views and cuts, materials, rendering,
• ­11.Examples of general 3D modelling of general elements, processes and functions ­
• 12.Individual work
• 13.Creation and print of a drawing

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• https://campus.allplan.com
• www.allplan.com/services/cad

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 20 %
Project – semestral 70 %
print of a drawing 10 %

Exam conditions

This is an elaboration of the construction drawing. The scope of work and proper use of software tools is assessed. Score corresponds to the procentage ratio of these evaluation methods. Term project can reach the maximum of 70 points, test maximum of 20 points, print maximum of 10 points. The student needs at least 70 points to pass the course.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.

CAD_4 CAD Systems IV

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jaromír Rais (seminar tutor)

Guaranteed by

Ing. Terezie Vondráčková, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/S01: Mon 11:25–12:55 D315, J. Rais
CAD_4/S02: Mon 13:05–14:35 D315, J. Rais

Prerequisites

FORMA(P)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is to introduce the students with other CAD system - Allplan. After the successful completion of the course, the student masters the basic procedures and the most important functions of this graphical program.

Syllabus

• 1.Allplan system - basic philosophy of the system, settings and basic drawing elements
• 2.Entering points, grips, auxiliary structures, area selection, etc.
• 3.Levels, foils, hatches, patterns, dimensions
• ­4.Complex example in 2D
• ­5.Introduction into 3D architecture, 3D motion in window, walls and height settings
• ­6.Window and door openings
• 7.Modeller - columns, slabs and holes in the board
• ­8.Stairs and roofs
• 9.Motion in 3D windows (motion, axonometric, perspective, hidden lines)
• ­10.Creation of 2D drawings from 3D views and cuts, materials, rendering,
• ­11.Examples of general 3D modelling of general elements, processes and functions ­
• 12.Individual work
• 13.Creation and print of a drawing

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• www.allplan.com/services/cad
• https://campus.allplan.com

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 20 %
Project – semestral 70 %
print of a drawing 10 %

Exam conditions

This is an elaboration of the construction drawing. The scope of work and proper use of software tools is assessed. Score corresponds to the procentage ratio of these evaluation methods. Term project can reach the maximum of 70 points, test maximum of 20 points, print maximum of 10 points. The student needs at least 70 points to pass the course.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course can also be completed outside the examination period.
The course is taught annually.

CAD_4 CAD Systems IV

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Guaranteed by

doc. Ing. Zuzana Rowland, MBA, PhD.
Department of Informatics and Natural Sciences – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Prerequisites

OBOR(CAP)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is to introduce the students with other CAD system - Allplan. After the successful completion of the course, the student masters the basic procedures and the most important functions of this graphical program.

Syllabus

• 1.Allplan system - basic philosophy of the system, settings and basic drawing elements
• 2.Entering points, grips, auxiliary structures, area selection, etc.
• 3.Levels, foils, hatches, patterns, dimensions
• ­4.Complex example in 2D
• ­5.Introduction into 3D architecture, 3D motion in window, walls and height settings
• ­6.Window and door openings
• 7.Modeller - columns, slabs and holes in the board
• ­8.Stairs and roofs
• 9.Motion in 3D windows (motion, axonometric, perspective, hidden lines)
• ­10.Creation of 2D drawings from 3D views and cuts, materials, rendering,
• ­11.Examples of general 3D modelling of general elements, processes and functions ­
• 12.Individual work
• 13.Creation and print of a drawing

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• www.allplan.com/services/cad
• https://campus.allplan.com

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 20 %
Project – semestral 70 %
print of a drawing 10 %

Exam conditions

This is an elaboration of the construction drawing. The scope of work and proper use of software tools is assessed. Score corresponds to the procentage ratio of these evaluation methods. Term project can reach the maximum of 70 points, test maximum of 20 points, print maximum of 10 points. The student needs at least 70 points to pass the course.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course can also be completed outside the examination period.
The course is taught annually.
The course is taught: every week.

CAD_4 CAD Systems IV

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jaromír Rais (seminar tutor)

Guaranteed by

Ing. Blanka Petrášková
Department of Informatics and Natural Sciences – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/S01: Thu 16:30–18:00 D315, J. Rais
CAD_4/S02: Thu 18:10–19:40 D315, J. Rais

Prerequisites

FORMA(P)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.
The capacity limit for the course is 56 student(s).
Current registration and enrolment status: enrolled: 0/56, only registered: 0/56

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is to introduce the students with other CAD system - Allplan. After the successful completion of the course, the student masters the basic procedures and the most important functions of this graphical program.

Syllabus

• 1.Allplan system - basic philosophy of the system, settings and basic drawing elements
• 2.Entering points, grips, auxiliary structures, area selection, etc.
• 3.Levels, foils, hatches, patterns, dimensions
• ­4.Complex example in 2D
• ­5.Introduction into 3D architecture, 3D motion in window, walls and height settings
• ­6.Window and door openings
• 7.Modeller - columns, slabs and holes in the board
• ­8.Stairs and roofs
• 9.Motion in 3D windows (motion, axonometric, perspective, hidden lines)
• ­10.Creation of 2D drawings from 3D views and cuts, materials, rendering,
• ­11.Examples of general 3D modelling of general elements, processes and functions ­
• 12.Individual work
• 13.Creation and print of a drawing

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• www.allplan.com/services/cad
• https://campus.allplan.com

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 20 %
Project – semestral 70 %
print of a drawing 10 %

Exam conditions

This is an elaboration of the construction drawing. The scope of work and proper use of software tools is assessed. Score corresponds to the procentage ratio of these evaluation methods. Term project can reach the maximum of 70 points, test maximum of 20 points, print maximum of 10 points. The student needs at least 70 points to pass the course.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course can also be completed outside the examination period.
The course is taught annually.

CAD_4 CAD Systems IV

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jiří Kotrba (seminar tutor)
Ing. Blanka Petrášková (seminar tutor)
Ing. Jaromír Rais (seminar tutor)

Guaranteed by

Ing. Blanka Petrášková
Department of Informatics and Natural Sciences – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/CAP: Sat 24. 5. 8:00–12:55 D315, Sun 25. 5. 8:00–15:20 D315, J. Kotrba, výuka ve zkráceném kurzu v rámci CŽV

Prerequisites

OBOR(CAP)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is to introduce the students with other CAD system - Allplan. After the successful completion of the course, the student masters the basic procedures and the most important functions of this graphical program.

Syllabus

• 1.Allplan system - basic philosophy of the system, settings and basic drawing elements
• 2.Entering points, grips, auxiliary structures, area selection, etc.
• 3.Levels, foils, hatches, patterns, dimensions
• ­4.Complex example in 2D
• ­5.Introduction into 3D architecture, 3D motion in window, walls and height settings
• ­6.Window and door openings
• 7.Modeller - columns, slabs and holes in the board
• ­8.Stairs and roofs
• 9.Motion in 3D windows (motion, axonometric, perspective, hidden lines)
• ­10.Creation of 2D drawings from 3D views and cuts, materials, rendering,
• ­11.Examples of general 3D modelling of general elements, processes and functions ­
• 12.Individual work
• 13.Creation and print of a drawing

Literature

recommended literature
• Nápověda obsažená v programu

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 20 %
Project – semestral 70 %
print of a drawing 10 %

Exam conditions

This is an elaboration of the construction drawing. The scope of work and proper use of software tools is assessed. Score corresponds to the procentage ratio of these evaluation methods. Term project can reach the maximum of 70 points, test maximum of 20 points, print maximum of 10 points. The student needs at least 70 points to pass the course.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course can also be completed outside the examination period.
The course is taught annually.

CAD_4 CAD Systems IV

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jaromír Rais (seminar tutor)

Guaranteed by

Ing. Blanka Petrášková
Department of Informatics and Natural Sciences – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/S01: Thu 16:20–17:50 D315, J. Rais
CAD_4/S02: Thu 17:55–19:25 D315, J. Rais
CAD_4/S03: Fri 13:10–14:40 D315, J. Rais
CAD_4/S04: Fri 14:45–16:15 D315, J. Rais

Prerequisites

FORMA(P)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is to introduce the students with other CAD system - Allplan. After the successful completion of the course, the student masters the basic procedures and the most important functions of this graphical program.

Syllabus

• 1.Allplan system - basic philosophy of the system, settings and basic drawing elements
• 2.Entering points, grips, auxiliary structures, area selection, etc.
• 3.Levels, foils, hatches, patterns, dimensions
• ­4.Complex example in 2D
• ­5.Introduction into 3D architecture, 3D motion in window, walls and height settings
• ­6.Window and door openings
• 7.Modeller - columns, slabs and holes in the board
• ­8.Stairs and roofs
• 9.Motion in 3D windows (motion, axonometric, perspective, hidden lines)
• ­10.Creation of 2D drawings from 3D views and cuts, materials, rendering,
• ­11.Examples of general 3D modelling of general elements, processes and functions ­
• 12.Individual work
• 13.Creation and print of a drawing

Literature

recommended literature
• Nápověda obsažená v programu

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 20 %
Project – semestral 70 %
print of a drawing 10 %

Exam conditions

This is an elaboration of the construction drawing. The scope of work and proper use of software tools is assessed. Score corresponds to the procentage ratio of these evaluation methods. Term project can reach the maximum of 70 points, test maximum of 20 points, print maximum of 10 points. The student needs at least 70 points to pass the course.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course can also be completed outside the examination period.
The course is taught annually.

CAD_4 CAD Systems IV

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jiří Kotrba (seminar tutor)

Guaranteed by

Ing. Blanka Petrášková
Department of Informatics and Natural Sciences – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/ccv: Fri 19. 4. 12:20–15:30 D315, Fri 10. 5. 12:20–15:30 D315, Fri 24. 5. 12:20–15:30 D315, J. Kotrba, výuka v rámci CŽV

Prerequisites (in Czech)

OBOR(CAP)

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is to introduce the students with other CAD system - Allplan. After the successful completion of the course, the student masters the basic procedures and the most important functions of this graphical program.

Syllabus

• 1.Allplan system - basic philosophy of the sysem, settings and basic drawing elements
• 2.Entering points, grips, auxiliary structures, area selection, etc.
• 3.Allplan system - levels, foils, hatches, patterns, dimensions ­
• 4.Allplan system - complex example in 2D ­
• 5. Allplan system - introduction into 3D architecture, 3D motion in window, walls and height settings ­
• 6. Allplan system - window and door openings
• 7. Allplan system - modeller, columns, slabs and holes in the board ­
• 8. Allplan system - stairs and roofs
• 9. Allpalan system - motion in 3D windows (motion, axonometric, perspective, hidden lines) ­
• 10. Allplan system - creation of 2D drawings from 3D views and cuts, materials, rendering, ­
• 11. Allplan system - examples of general 3D modelling of general elements, processes and functions ­
• 12. Allplan system - Individual work
• 13. Allplan system - Individual work

Literature

required literature
• Uživatelské příručky dle dané verze systémů.

recommended literature
• Allplan 2009
• http://www.allplan2009.com/cz

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Individual Work– Individual or Individualized Activity
Teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26
Attendance on Seminars/Exercises/Tutorial/Excursion	26
Total:	52	0

Assessment Methods and Assesment Rate

Project – semestral 100 %

Language of instruction

Czech

Further Comments

The course can also be completed outside the examination period.
The course is taught annually.

CAD_4 CAD Systems IV

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jiří Kotrba (seminar tutor)

Guaranteed by

Ing. Blanka Petrášková
Department of Informatics and Natural Sciences – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/S01: Wed 17:55–19:25 D316, J. Kotrba
CAD_4/S02: Fri 16:20–17:50 D316, J. Kotrba
CAD_4/S03: Fri 17:55–19:25 D316, J. Kotrba

Prerequisites

The student can work in the graphic programme AutoCAD 2D.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is mastering of skills with graphical program CADKON - TZB. After the successful completion of the subject, the student will be able to create drawings of sewers, water mains, gas, heating and air conditioning.

Syllabus

• 1.Introduction to the course CAD_3. Possibilities of substrates.
• 2. Teaching of AutoCAD Sanitary superstructure CADKON. Explanation of floor plans, sections and axonometric advanced plumbing ZTI systems (sanitary).
• 3.Creating specifications of used materials and elements of the drawing. The output will be mainly the table to MS Excel (OpenOffice) and legends inserted directly into the drawing (pipe line types, used symbols).
• 4.Customizing CADKON to a company practices and standards – pre-setting of levels(names, colours, types of lines), adjustment of database of the used signes and many other settings (span of pipeline, shape of text labels in the drawing...).
• 5.Processing of drawing documentation of drains.
• 6.Processing of drawing documentation of water distribution.
• 7.Processing of project documentation drawings of gas distribution.
• 8.Teaching AutoCAD extensions CADKON Heating and piping. Explanation of floor plans and sections of the heating system.
• 9.Connection of CADKON with the computer programs of heat loss and sizing of heating system.
• 10. Processing of heating in project documentation.
• 11.Teaching AutoCAD Výuka nadstavby AutoCADu CADKON air-conditioning. Teaching of floor plans and cuttings in air-conditioning system in 2D.
• 12.Processing of air-conditioning drawings of project documentation.
• 13.Submitting of the required drawing documentation (sanitary technology, heating, air conditioning).

Literature

recommended literature
• Nápověda obsažená v programu

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26
Attendance on Seminars/Exercises/Tutorial/Excursion	26
Total:	52	0

Assessment Methods and Assesment Rate

Project – semestral 100 %

Language of instruction

Czech

Further Comments

The course can also be completed outside the examination period.
The course is taught annually.

CAD_4 CAD Systems IV

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jiří Kotrba (seminar tutor)

Guaranteed by

Ing. Blanka Petrášková
Department of Informatics and Natural Sciences – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable of Seminar Groups

CAD_4/S01: Thu 16:20–17:50 D316, J. Kotrba
CAD_4/S02: Thu 17:55–19:25 D316, J. Kotrba

Prerequisites

FORMA(P)
Basic knowledge of AutoCAD system.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.
The capacity limit for the course is 46 student(s).
Current registration and enrolment status: enrolled: 0/46, only registered: 0/46

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is mastering of skills with graphical program CADKON - TZB. After the successful completion of the subject, the student will be able to create drawings of sewers, water mains, gas, heating and air conditioning.

Syllabus

• 1.Introduction to the course CAD_4. Possibilities of substrates.
• 2. Teaching of AutoCAD Sanitary superstructure CADKON. Explanation of floor plans, sections and axonometric advanced plumbing ZTI systems (sanitary).
• 3.Creating specifications of used materials and elements of the drawing. The output will be mainly the table to MS Excel (OpenOffice) and legends inserted directly into the drawing (pipe line types, used symbols).
• 4.Customizing CADKON to a company practices and standards – pre-setting of levels(names, colours, types of lines), adjustment of database of the used signes and many other settings (span of pipeline, shape of text labels in the drawing...).
• 5.Processing of drawing documentation of drains.
• 6.Processing of drawing documentation of water distribution.
• 7.Processing of project documentation drawings of gas distribution.
• 8.Teaching AutoCAD extensions CADKON Heating and piping. Explanation of floor plans and sections of the heating system.
• 9.Connection of CADKON with the computer programs of heat loss and sizing of heating system.
• 10. Processing of heating in project documentation.
• 11.Teaching AutoCAD Výuka nadstavby AutoCADu CADKON air-conditioning. Teaching of floor plans and cuttings in air-conditioning system in 2D.
• 12.Processing of air-conditioning drawings of project documentation.
• 13.Submitting of the required drawing documentation (sanitary technology, heating, air conditioning).

Literature

• Nápověda obsažená v programu.

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26
Attendance on Seminars/Exercises/Tutorial/Excursion	26
Total:	52	0

Assessment Methods and Assesment Rate

Project – semestral 100 %

Language of instruction

Czech

Further comments (probably available only in Czech)

The course can also be completed outside the examination period.
The course is taught annually.
General note: Vypsán pouze pro uznání předmětů.

CAD_4 CAD Systems IV

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Guaranteed by

Ing. Petr Hanzal, Ph.D.
Department of Informatics and Natural Sciences – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Prerequisites

Basic knowledge of working with AutoCAD.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is to acquiant the students with software CADKON - TZB 2011. Students will be able to make a design documentation of canalization, water, gas, heating and air conditioning.

Syllabus

• 1.Introduction into the subject.
• 2.Teaching AutoCAD Cadkon upgrade - sanitary technology. Explanation of a ground plan creation, extended cuts and axometry of systems ZTI
• 3.Creation of applied material specifications and plan elements.The output wil be charts into MS Excel (OpenOffice) programmes and key put into the plan (tubular lines, applied symbols).
• 4.CADKON matching to firm custom and standards - presetting the levels (names, colours,types of lines...),database of applied symbols treatment and other settings (pipe span, form of text descripiton in a drawing....)
• 5.Processing the contract documents of canalization.
• 6.Processing the contract documents of water distribution.
• 7.Processing the contract documents of gas distribution.
• 8.Teaching AutoCAD CADKON upgrade- heating and piping.Explanation of ground plan creation and cuts in heating system.
• 9.CADKON and heat loss rating and dimensioning of heating sets.
• 10.Processing the contract documents of heating.
• 11.Teaching AutoCAD CADKON upgrade - air conditioning. Explanation of ground plan creation and cuts in air conditioning system in 2D.
• 12.Processing the contract documents of air conditioning.
• 13.Handing in drawing documentation (sanitary technology, heating, air conditioning).

Literature

required literature
• Uživatelské příručky dle dané verze systémů.

recommended literature
• http://www.allplan2009.com/cz
• SÝKORA, P. Microstation V8 XM edition. Uživatelská příručka
• Allplan 2009

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26
Attendance on Seminars/Exercises/Tutorial/Excursion	26
Total:	52	0

Assessment Methods and Assesment Rate

Project – semestral 100 %

Language of instruction

Czech

Further comments (probably available only in Czech)

The course can also be completed outside the examination period.
The course is taught annually.
The course is taught: every week.
General note: Vypsán pouze pro uznání předmětů.

CAD_4 CAD Systems IV

The course is not taught in winter 2022

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Aleš Kaňkovský (seminar tutor)

Guaranteed by

Ing. Vladimír Nývlt, MBA, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Prerequisites

FORMA(P)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

Learning outcomes of the course unit The aim of the course is to extend the knowledge of Grafisoft ArchiCAD 3D graphics system and to deepen user skills with this program. Upon successful completion of the course, the student can control some program extensions as well as the setting of materials and element properties.

Learning outcomes

The student has an extended knowledge of Grafisoft ArchiCAD 3D graphic system and deepened user skills with this program. Student controls some program extensions as well as setting materials and element properties.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, Repetition of CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, Skeleton, Terrain - geodetic coordinates
• 4. Creating a video of the flight
• 5. Lighting / Lamp Function, Sunlight Study, Energy Rating
• 6. Grafisoft ArchiCAD MEP
• 7. Grafisoft ArchiCAD MEP
• 8. Grafisoft ArchiCAD add-ons and applications
• 9. Grafisoft ArchiCAD add-ons and applications
• 10. Grafisoft ArchiCAD add-ons and applications
• 11. Grafisoft ArchiCAD add-ons and applications
• 12. Independent work
• 13. Independent work and submission of the project

Literature

recommended literature
• https://campus.allplan.com
• www.allplan.com/services/cad
• Nápověda obsažená v programu

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial		16
Semester project	26	26
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Project – semestral 100 %

Exam conditions

It is the elaboration of the specified building drawing. The scope of work and the correct use of the program tools are evaluated. The score corresponds to the percentage of the evaluation methods. Semestral project max. 100 points. To pass the course successfully, it is necessary to get a min. 70 points.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.
The course is taught: every week.

Teacher's information

Attendance in lessons is defined in a separate internal standard of ITB (Evidence of attendance of students at ITB). It is compulsory, except of the lectures, for full-time students to attend 70 % lesson of the subjet in a semeste

CAD_4 CAD Systems IV

The course is not taught in summer 2022

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Aleš Kaňkovský (seminar tutor)

Guaranteed by

Ing. Vladimír Nývlt, MBA, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Prerequisites (in Czech)

OBOR(CAP)

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Language of instruction

Czech

Further Comments

The course is taught annually.
The course is taught: every week.

CAD_4 CAD Systems IV

The course is not taught in winter 2021

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Aleš Kaňkovský (seminar tutor)

Guaranteed by

Ing. Vladimír Nývlt, MBA, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Prerequisites

FORMA(P)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

Learning outcomes of the course unit The aim of the course is to extend the knowledge of Grafisoft ArchiCAD 3D graphics system and to deepen user skills with this program. Upon successful completion of the course, the student can control some program extensions as well as the setting of materials and element properties.

Learning outcomes

The student has an extended knowledge of Grafisoft ArchiCAD 3D graphic system and deepened user skills with this program. Student controls some program extensions as well as setting materials and element properties.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, Repetition of CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, Skeleton, Terrain - geodetic coordinates
• 4. Creating a video of the flight
• 5. Lighting / Lamp Function, Sunlight Study, Energy Rating
• 6. Grafisoft ArchiCAD MEP
• 7. Grafisoft ArchiCAD MEP
• 8. Grafisoft ArchiCAD add-ons and applications
• 9. Grafisoft ArchiCAD add-ons and applications
• 10. Grafisoft ArchiCAD add-ons and applications
• 11. Grafisoft ArchiCAD add-ons and applications
• 12. Independent work
• 13. Independent work and submission of the project

Literature

recommended literature
• https://campus.allplan.com
• www.allplan.com/services/cad
• Nápověda obsažená v programu

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial		16
Semester project	26	26
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Project – semestral 100 %

Exam conditions

It is the elaboration of the specified building drawing. The scope of work and the correct use of the program tools are evaluated. The score corresponds to the percentage of the evaluation methods. Semestral project max. 100 points. To pass the course successfully, it is necessary to get a min. 70 points.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.
The course is taught: every week.

Teacher's information

Attendance in lessons is defined in a separate internal standard of ITB (Evidence of attendance of students at ITB). It is compulsory, except of the lectures, for full-time students to attend 70 % lesson of the subjet in a semeste

CAD_4 CAD Systems IV

The course is not taught in summer 2020

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Jiří Šál, Ph.D. (seminar tutor)

Guaranteed by

Ing. Lukáš Polanecký
Study Department – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Prerequisites

OBOR(CAP)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

Learning outcomes of the course unit The aim of the course is to extend the knowledge of Grafisoft ArchiCAD 3D graphics system and to deepen user skills with this program. Upon successful completion of the course, the student can control some program extensions as well as the setting of materials and element properties.

Learning outcomes

The student has an extended knowledge of Grafisoft ArchiCAD 3D graphic system and deepened user skills with this program. Student controls some program extensions as well as setting materials and element properties.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, Repetition of CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, Skeleton, Terrain - geodetic coordinates
• 4. Creating a video of the flight
• 5. Lighting / Lamp Function, Sunlight Study, Energy Rating
• 6. Grafisoft ArchiCAD MEP
• 7. Grafisoft ArchiCAD MEP
• 8. Grafisoft ArchiCAD add-ons and applications
• 9. Grafisoft ArchiCAD add-ons and applications
• 10. Grafisoft ArchiCAD add-ons and applications
• 11. Grafisoft ArchiCAD add-ons and applications
• 12. Independent work
• 13. Independent work and submission of the project

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• www.allplan.com/services/cad
• https://campus.allplan.com

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 30 %
Project – semestral 70 %

Exam conditions

It is the elaboration of the specified building drawing. The scope of work and the correct use of the program tools are evaluated. The score corresponds to the percentage of the evaluation methods. Semestral project max. 70 points, test max.30 points. To pass the course successfully, it is necessary to get a min. 70 points.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.
The course is taught: every week.

Teacher's information

Attendance in lessons is defined in a separate internal standard of ITB (Evidence of attendance of students at ITB). It is compulsory, except of the lectures, for full-time students to attend 70 % lesson of the subjet in a semeste

CAD_4 CAD Systems IV

The course is not taught in summer 2019

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Guaranteed by

Ing. Jaroslav Staněk, DiS.
Study Department – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Prerequisites

OBOR(CAP)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

Learning outcomes of the course unit The aim of the course is to extend the knowledge of Grafisoft ArchiCAD 3D graphics system and to deepen user skills with this program. Upon successful completion of the course, the student can control some program extensions as well as the setting of materials and element properties.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, Repetition of CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, Skeleton, Terrain - geodetic coordinates
• 4. Creating a video of the flight
• 5. Lighting / Lamp Function, Sunlight Study, Energy Rating
• 6. Grafisoft ArchiCAD MEP
• 7. Grafisoft ArchiCAD MEP
• 8. Grafisoft ArchiCAD add-ons and applications
• 9. Grafisoft ArchiCAD add-ons and applications
• 10. Grafisoft ArchiCAD add-ons and applications
• 11. Grafisoft ArchiCAD add-ons and applications
• 12. Independent work
• 13. Independent work and submission of the project

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• https://campus.allplan.com
• www.allplan.com/services/cad

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 30 %
Project – semestral 70 %

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.
The course is taught: every week.

CAD_4 CAD Systems IV

The course is not taught in summer 2018

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Guaranteed by

doc. Ing. Zuzana Rowland, MBA, PhD.
Study Department – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Prerequisites

OBOR(CAP)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

Learning outcomes of the course unit The aim of the course is to extend the knowledge of Grafisoft ArchiCAD 3D graphics system and to deepen user skills with this program. Upon successful completion of the course, the student can control some program extensions as well as the setting of materials and element properties.

Syllabus

• 1. Grafisoft ArchiCAD and BIM, Repetition of CAD_2 ArciCAD
• 2. Setting and changing materials and surfaces, editing elements
• 3. Roofmaker, Trussmaker, Skeleton, Terrain - geodetic coordinates
• 4. Creating a video of the flight
• 5. Lighting / Lamp Function, Sunlight Study, Energy Rating
• 6. Grafisoft ArchiCAD MEP
• 7. Grafisoft ArchiCAD MEP
• 8. Grafisoft ArchiCAD add-ons and applications
• 9. Grafisoft ArchiCAD add-ons and applications
• 10. Grafisoft ArchiCAD add-ons and applications
• 11. Grafisoft ArchiCAD add-ons and applications
• 12. Independent work
• 13. Independent work and submission of the project

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• https://campus.allplan.com
• www.allplan.com/services/cad

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 30 %
Project – semestral 70 %

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.
The course is taught: every week.

CAD_4 CAD Systems IV

The course is not taught in summer 2017

Extent and Intensity

0/2/0. 2 credit(s). Type of Completion: z (credit).

Guaranteed by

doc. Ing. Zuzana Rowland, MBA, PhD.
Study Department – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice
Supplier department: Study Department – Vice-Rector for Study Affairs – Rector – Institute of Technology and Business in České Budějovice

Prerequisites

OBOR(CAP)
The student should master the basic computer work with MS Windows.

Course Enrolment Limitations

The course is also offered to the students of the fields other than those the course is directly associated with.

fields of study / plans the course is directly associated with

• Building Management (programme VŠTE, ST)

Course objectives supported by learning outcomes

The aim of the subject is to introduce the students with other CAD system - Allplan. After the successful completion of the course, the student masters the basic procedures and the most important functions of this graphical program.

Syllabus

• 1.Allplan system - basic philosophy of the system, settings and basic drawing elements
• 2.Entering points, grips, auxiliary structures, area selection, etc.
• 3.Levels, foils, hatches, patterns, dimensions
• ­4.Complex example in 2D
• ­5.Introduction into 3D architecture, 3D motion in window, walls and height settings
• ­6.Window and door openings
• 7.Modeller - columns, slabs and holes in the board
• ­8.Stairs and roofs
• 9.Motion in 3D windows (motion, axonometric, perspective, hidden lines)
• ­10.Creation of 2D drawings from 3D views and cuts, materials, rendering,
• ­11.Examples of general 3D modelling of general elements, processes and functions ­
• 12.Individual work
• 13.Creation and print of a drawing

Literature

recommended literature
• Nápověda obsažená v programu

not specified
• https://campus.allplan.com
• www.allplan.com/services/cad

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Project Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26	42
Attendance on Seminars/Exercises/Tutorial/Excursion	26	10
Total:	52	52

Assessment Methods and Assesment Rate

Test – mid-term 20 %
Project – semestral 70 %
print of a drawing 10 %

Exam conditions

This is an elaboration of the construction drawing. The scope of work and proper use of software tools is assessed. Score corresponds to the procentage ratio of these evaluation methods. Term project can reach the maximum of 70 points, test maximum of 20 points, print maximum of 10 points. The student needs at least 70 points to pass the course.

Language of instruction

Czech

Further comments (probably available only in Czech)

The course is taught annually.
The course is taught: every week.

CAD_4 CAD Systems IV

The course is not taught in Winter 2010

Extent and Intensity

0/2. 2 credit(s). Type of Completion: z (credit).

Teacher(s)

Ing. Petra Bednářová, Ph.D. (lecturer)

Guaranteed by

Ing. Radim Galko, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Prerequisites (in Czech)

CAD_3 CAD Systems III

Course Enrolment Limitations

The course is offered to students of any study field.

Course objectives supported by learning outcomes

To acquaint students with the software CADKON - TEB 2011. Students will be able to create drawings of sewer, water, gas, heating and air conditioning.

Syllabus

• 1) Introduction to the course content of CAD_4. 2) Lesson extensions to AutoCAD CADKON Sanitary. Explanation of creating floor plans, sections and axonometric advanced plumbing systems (sanitary). 3) Creating of the specifications of the material used and the elements of drawing. The output will be primarily a table to MS Excel (OpenOffice) and legends deposited directly into your drawing (pipe line types, symbols used). 4) Adjusting CADKON to business practices and standards - presets (names, colors, line types ...), database modifications of the marks and many other small settings (line spacing, text descriptions of the shapes in the plot ...). 5) Development of design documentation drawings sanitation. 6) Development of design documentation drawings of water distribution. 7) Development of project documentation drawing gas distribution systems. 8) Lesson extensions to AutoCAD CADKON Heating and Pipelines. Explanation of creating of floor plans and sections of the heating system. 9) Link to computer programs CADKON on heat loss and heating system sizing. 10) Development of design documentation drawings heating. 11) Lesson extensions to AutoCAD CADKON fans. Teaching creating floor plans and sections of the HVAC system in two dimensions (2D). 12) Development of project documentation drawing of air technology. 13) Submission of required documentation, drawings (plumbing, heating, air conditioning).

Literature

required literature
• Uživatelské příručky dle dané verze systémů.

recommended literature
• http://www.allplan2009.com/cz
• SÝKORA, P. Microstation V8 XM edition. Uživatelská příručka
• Allplan 2009

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26
Attendance on Seminars/Exercises/Tutorial/Excursion	26
Total:	52	0

Assessment Methods and Assesment Rate

Project – semestral 100 %

Language of instruction

Czech

CAD_4 CAD Systems IV

The course is not taught in Summer 2010

Extent and Intensity

0/0. Type of Completion: z (credit).

Teacher(s)

Ing. Jaromír Falada (seminar tutor)

Guaranteed by

Ing. Petra Bednářová, Ph.D.
Department of Civil Engineering – Faculty of Technology – Rector – Institute of Technology and Business in České Budějovice

Timetable

Wed 11:25–12:55 D316

Prerequisites

CAD_3 CAD Systems III
Entrance requirements: Students are supposed to know how to operate basic computer work with in Windows and work in CAD systems and in 2D and 3D (content items CAD Systems I - III).The course IV CAD systems is the subject of a final comprehensive set of objects in   CAD Systems I - III - advanced level.

Course Enrolment Limitations

The course is offered to students of any study field.

Course objectives supported by learning outcomes

The course is a complex process of structural engineering sample project. Teaching takes place in the PC classroom and is implemented through a series of practical examples of integrated blocks. Students will draw up a set of structural engineering drawings of the project as required by building practice on the basis of their own choice of CAD systems - AutoCAD, Allplan, Microstation. Drawings of the project (floor plan, views, sections, etc.) will be processed in a 2D visualization of the resulting object will be processed in 3D.

Syllabus

• 1. Foundation drawings and basic configuration of layers and lines. 2. Processing of 2D floor plans. 3. Processing of 2D slices. 4. Processing of 2D views. 5. Processing of 3D model building. 6. Visualization of 3D model building. Presentation creation, and other project outputs.

Literature

required literature
• Uživatelské příručky dle dané verze systémů.

recommended literature
• Text pro podporu výuky AutoCADu [online] [cit. 2009-09-01]

Forms of Teaching

Seminar
Consultation

Teaching Methods

Frontal Teaching
Individual Work– Individual or Individualized Activity
teaching based on computer

Student Workload

Activities	Number of Hours of Study Workload
	Daily Study	Combined Study
Preparation for Seminars, Exercises, Tutorial	26
Attendance on Seminars/Exercises/Tutorial/Excursion	26
Total:	52	0

Assessment Methods and Assesment Rate

Project – semestral 100 %

Language of instruction

Czech

• Enrolment Statistics (recent)